bfast algorithm for fixed angle broadband

doc/bfast/fixed_angle_broadband_simulations_in_Meep.md

@@ -0,0 +1,154 @@
+---
+# Fixed Angle Broadband Simulations in Meep
+---
+
+Introduction
+============
+
+Currently in MEEP, Bloch Periodic boundary conditions are implemented,
+which fix the wave vector of an incident wave [1]. As a result, the
+angle of an oblique incident wave becomes frequency dependent. Following
+the procedure detailed by B. Liang et al [2], all fields can be
+redefined so that the boundary conditions become periodic and the angle
+of the incident wave can be fixed over a broad frequency spectrum. This
+requires the addition of a new field. It is assumed that the reader is
+already familiar with the UPML formulation in MEEP [3], from which
+the equations will be modified.  B. Liang et al applied this method by
+splitting the electric and magnetic fields into multiple terms. This is
+different from the UPML formulation in MEEP, which allows simulation of
+more complex media, and so the method of B. Liang et al has to be adapted.
+
+Boundary conditions
+===================
+
+The fields from section 3 of *Notes on the UPML implementation in MEEP*
+[3] are first redefined as:
+```math
+\text{field}'(x,y,z) = \text{field}(x,y,z)e^{-i(k_{x}x+k_{y}y)}, \tag{1}
+```
+where $k_{x}$ and $k_{y}$ are the wave vector components in the x and y
+directions. This is for a structure which is periodic in these
+directions. Taking the electric field $E$ as an example, the new
+boundary condition can be expressed as
+```math
+E'(x+a,y+b,z) = E(x+a,y+b,z)e^{-i(k_{x}(x+a)+k_{y}(y+b))} \tag{2}
+```
+where a is the length of the unit cell in the x direction and b in the y direction.
+Substituting in the original Bloch periodic boundary conditions gives
+```math
+E'(x+a,y+b,z) = E(x,y,z)e^{i(k_{x}a+k_{y}b)}e^{-i(k_{x}(x+a)+k_{y}(y+b))}. \tag{3}
+```
+Cancelling the $a$ and $b$ terms gives
+```math
+E'(x+a,y+b,z) =E(x,y,z)e^{-i(k_{x}x+k_{y}y)}=E'(x,y,z), \tag{4}
+```
+and so the boundary conditions are now periodic.
+
+Formulation
+===========
+
+Equation (5) from section 3 of *Notes on the UPML implementation in
+MEEP* [3] is
+```math
+\vec{K} = \nabla \times \vec{H}=-i\omega(1+\frac{i\sigma_{D}}{\omega})\vec{C}, \tag{5}
+```
+where $\vec{H}$ is the magnetic field, $\sigma_{D}$ the conductivity and
+$\vec{C}$ an auxiliary field. When the magnetic field is redefined, the
+curl of a product must be carried out:
+```math
+\nabla\times \vec{H'} = \nabla\times (\vec{H} e^{-i(k_{x}x+k_{y}y)}) \tag{6}
+```
+so,
+```math
+\nabla\times \vec{H'} = e^{-i(k_{x}x+k_{y}y)} \nabla\times \vec{H} + \begin{pmatrix} -ik_{x} \\-ik_{y}\\0 \end{pmatrix} \ \times \vec{H'} \tag{7}
+```
+where the complex exponential in the second term has been absorbed by
+$\vec{H'}$. Substituting in equation (5) gives
+```math
+\nabla\times \vec{H'} = \vec{K'} = -i\omega (1+\frac{i\sigma_{D}}{\omega}) \vec{C'} + \begin{pmatrix} -ik_{x} \\-ik_{y}\\0 \end{pmatrix} \ \times \vec{H'}. \tag{8}
+```
+From here on in, the prime notation can be dropped since this applies to
+all fields. By introducing a new field $\vec{F}$, equation
+(8) can be written as
+```math
+\vec{K} = -i\omega(1+\frac{i\sigma_{D}}{\omega})\vec{C} - i\omega\vec{F}. \tag{9}
+```
+This new field satisfies the equation:
+```math
+\vec{F} = \vec{\bar{k}}\times\vec{H}, \tag{10}
+```
+where
+```math
+\vec{\bar{k}} =\frac{1}{\omega}\begin{pmatrix} k_{x} \\ k_{y}\\0 \end{pmatrix} \ = n \begin{pmatrix} \sin{\theta}\cos{\phi} \\ \sin{\theta}\sin{\phi}\\0 \end{pmatrix} \ \tag{11}
+```
+and so $\vec{\bar{k}}$ is the wave vector with its frequency dependence
+removed. $\theta$ and $\phi$ are the propagating direction angles, $n$ is the refractive index of the source medium and c,
+the speed of light is taken to be 1. Therefore by defining $\vec{F}$,
+the angle of the incident wave is fixed. Equation
+(10) can be discretized as:
+```math
+\vec{F}^{n+1}=2\bar{\vec{k}}\times\vec{H}^{n+0.5} -\vec{F}^{n} . \tag{12}
+```
+Transforming equation (9)
+to the time domain gives:
+```math
+\vec{K} = \frac{\partial \vec{C}}{\partial t}+\sigma_{D}\vec{C}+\frac{\partial \vec{F}}{\partial t} . \tag{13}
+```
+This can be discretized as:
+```math
+\vec{K}^{n+0.5}=\frac{\vec{C}^{n+1}-\vec{C}^n}{\Delta t}+\sigma_{D}\frac{\vec{C}^{n+1}+\vec{C}^n}{2} + \frac{\vec{F}^{n+1}-\vec{F}^{n}}{\Delta t} \tag{14}
+```
+and then solved to update the value of $\vec{C}$ using:
+```math
+\vec{C}^{n+1}=(1+\frac{\sigma_{D} \Delta t}{2})^{-1} [(1-\frac{\sigma_D \Delta t}{2}) \vec{C}^n+\Delta t\vec{K}^{n+0.5}+\vec{F}^{n}-\vec{F}^{n+1}] . \tag{15}
+```
+All other equations are unaffected by these changes.
+
+A new field must be introduced because $\vec{H}$ is defined at
+$n+\frac{1}{2}$ timesteps whereas $\vec{C}$ is defined at $n$ timesteps,
+where $n$ is an integer. As a result, if the derivative in $\vec{F}$ in
+equation (14) was replaced with
+```math
+\vec{\bar{k}}\times(\frac{\vec{H}^{n+0.5}-\vec{H}^{n-0.5}}{\Delta t}), \tag{16}
+```
+only first order accuracy would be achieved, since this is a backward
+difference scheme. To achieve second order accuracy would require
+$\vec{H}^{n+1.5}$ to be known.
+
+Application to the source code
+=========
+
+$\vec{C}$ is first time-stepped using the original function in the MEEP source code, i.e. using
+```math
+\vec{C}^{n+1}=(1+\frac{\sigma_{D} \Delta t}{2})^{-1} [(1-\frac{\sigma_D \Delta t}{2}) \vec{C}^n+\Delta t\vec{K}^{n+0.5}]. \tag{17}
+```
+When fixed angle broadband simulations are required, a new function is called which recovers equation (15) using
+```math
+\vec{C'}^{n+1} = (1+\frac{\sigma_{D} \Delta t}{2})^{-1} (\vec{F}^{n}-\vec{F}^{n+1}) + \vec{C}^{n+1}. \tag{18}
+```
+Similarly, all other fields which depend on the value of $\vec{C}$ have new terms added to them, multiplied by the relevant conductivity. Therefore the original functions in MEEP remain unchanged.
+
+Stability
+=========
+
+As the incident angle increases, the maximum possible $\Delta t$ value
+decreases, following the formula:
+```math
+\frac{c\Delta t}{\Delta x} \leq \frac{(1-\sin(\theta))}{\sqrt{D}} \tag{17}
+```
+where D is the number of dimensions [2].
+
+References
+=========
+
+[1] Taflove A., Oskooi A., Johnson S.. *Advances in FDTD Computational
+Electrodynamics: Photonics and Nanotechnology*. Artech House, Inc.; 2013
+
+[2] Liang B., Bai M., Ma H., Ou N., Miao J.. Wideband Analysis of Periodic
+Structures at Oblique Incidence by Material Independent FDTD Algorithm.
+*IEEE Transactions on Antennas and Propagation*, vol. 62, no. 1, pp.
+354-360, Jan. 2014, doi: 10.1109/TAP.2013.2287896.
+
+[3] Johnson S. *Notes on the UPML implementation in Meep*. Massachusetts
+Institute of Technology. Posted August 17, 2009; updated March 10, 2010.
+http://ab-initio.mit.edu/meep/pml-meep.pdf