NeCTAR Cloud Tier 0 Documentation

The purpose of this README is to give potential documentation writers (or "contributors") a primer on the systems and workflows we use to produce the NeCTAR documentation and allow you to contribute to it quickly. It's suggested that you read this README through at least once completely before starting out.

Please note that this README and all the other documentation in this project is a work in progress. If you feel any of this content could be improved, please do follow this process as best you can, and submit your changes back for review. Together this thing can be awesome :).

Licensing

All documentation produced under this repository is licensed under the Apache v2 licence.

Sourcing content and attribution

Any content funded by NeCTAR is available for assimilation and standardization into this project. Where possible the original contributors should be requested to contribute their documentation directly.

Copying volumes of content from the Internet is to be avoided, if said content is authoritative, simply link to it instead. For example installing git is extensively documented at the git website already so we haven't bothered trying to replicate it here.

How to contribute

If you haven't contributed to a GitHub repository under Gerrit review before, the initial setup may seem a little daunting; there are several new tools and concepts to learn. Some or all of these tools you may have used before, so hopefully you're not starting from scratch :). But once you are up to speed you can create documentation and contribute code across the entire NeCTAR project.

If you get stuck talk to the nectar docs team or ask on the #nectar IRC channel on freenode.

Initial setup

You need to understand the basics of:

operating a computer via the command line.
Git and branching.
writing documentation using GitHub flavoured markdown;
using a key generator (ssh-keygen), as you will need a keypair for git review.

and then finally, you'll need to become familiar with

Gerrit, the git reviewing platform;

Now don't worry too much, this README is aimed at taking the pain away from learning all of that and intends to provide step by step instructions to guide you along the way.

Note that git and git-review are command line programs - they don't come with a graphical user interface - and whilst one or another graphical front end may (or may not) work, how to make them work is outside the scope of this document.

Access the the NeCTAR-RC/nectarcloud-tier0doco repository

You need to install, register for or have access to the following tools, accounts and privileges;

Install git, the leading distributed version control system
Install git-review, the git plugin for Gerrit
If you don't already have a suitable keypair, then create a new ssh keypair using ssh-keygen -t rsa -f my_gerrit.key then copy both files to your $HOME/.ssh directory. You need this for passwordless use of the git review command. (for the instructions in this document we'll now assume that you have a keypair in your $HOME/.ssh directory consisting of private key my_gerrit_key and corresponding public key my_gerrit_key.pub)
If you don't already have one, register for a Launchpad id (you need this to access Gerrit)
- Get a launchpad login here
- Use your Launchpad ID to log in to Gerrit here
Create a Gerrit "username" and add the new set of ssh keys. This is done within your account/profile settings

Add a username Look_ma_Im_using_Gerrit

Click on the Add Key button and copy your my_gerrit.key.pub into the field provided.

Test git-review by using the command ssh -p 29418 Look_Ma_Im_using_Gerrit@review.rc.nectar.org.au
- if successful you should get back something like this....
**** Welcome to Gerrit Code Review ****

Hi [Your Name], you have successfully connected over SSH.

Unfortunately, interactive shells are disabled. To clone a hosted Git repository, use:

git clone ssh://Look_ma_Im_using_Gerrit@review.rc.nectar.org.au:29418/REPOSITORY_NAME.git

Connection to review.rc.nectar.org.au closed.
Email Nick Golovachenko your Gerrit username ("Look_ma_Im_using_Gerrit" in the example above) requesting access privileges as a contributor to the nectarcloud-tier0doco project

Github, Gerrit and the documentation workflow

Unlike other GitHub projects, you can't edit the NeCTAR content directly on GitHub. This is because we use Gerrit to do the peer review and checking of content before it is uploaded to GitHub. That may seem odd, but GitHub doesn't offer a sophisticated enough review system, so for that we use Gerrit. Gerrit sits between you and GitHub. To make it a little clearer, documentation (or content) in this project follows this workflow;

You don't have to have or create your own GitHub account. There are some small benefits if you do, but it is not required. (Notably: if your git email address corresponds with your GitHub email address, then GitHub will attribute your contributions to you)

 +-----------------+
 |                 |                                   Content is visible
 |  Contributor    |                                   here, but should
 |  clones project |                 +------------+    be cloned to your own
 |  to their       |<----------------|            |    computer to edit it
 |  computer       |                 |  New doco  |             +
 |                 |         +------>+  Appears   | ------------+
 +-+---------------+         |       |  on GitHub |
   |                         |       |            |
   |          +--------------+-+     +------+-----+
   |          |                |            |
   |          |  contributor   |            |
   |          |  submits doco  |     +------v-----+      +---------------+
   |   +----->+  to review via |     |            |      |               |
   |   |      |  Gerrit.       |     |  Markdown  +----->+ Freshdesk     |
   |   |      |                |     |  2         |      |               |
   +   |      +--------+-------+     |  HTML      |      +---------------+
   V   |               |             |            |
 +-----+-------+       |      |      +-------+----+
 |             |       |      |              |          +----------------+
 | Contributor |<------+      |              |          |                |
 |  writes in  |              |              +---------->  Some other    |
 |  markdown   |              +                         |    place?      |
 |             |        Sometimes this review           |                |
 +-------------+        can take a few iterations       +----------------+
                        before your doco is
                        approved.  Don't be offended :)

                                                      http://asciiflow.com/

Workflow step by step

Take your time and read through this slowly, don't be afraid to ask for help :).

Cloning the project from GitHub

Firstly you need to clone the whole documentation project from Gerrit down to your own computer so you can make changes to it.

open up a command prompt (windows) or terminal window (OSX & Linux)
change directory to wherever you want these files to live; in your home folder is fine, but it's up to you.
to clone the documentation repository to your computer, paste in the following line and hit enter

git clone https://github.com/NeCTAR-RC/nectarcloud-tier0doco.git
Open the newly created nectarcloud-tier0doco directory and see what's in it.

Further documentation on cloning repositories can be found at GitHub.

The project directory structure

Now you have the project cloned locally, you can start having a look around and hopefully making some valuable changes :) All the content we are creating should be created under the correct folders. That way it can be parsed and imported correctly into Freshdesk.

All the content we create should be under
articles/NeCTAR Documentation--DOCID16/
or
articles/Cloud Expert--DOCID19

Underneath that your content must be structured in accordance with the action list content google document. so have a look at that and you will see the folder structure laid out from left to right.

Thusly, content would be named NeCTAR Documentation--DOCID16/'Folder Name'/'Solution Name'.md

If you are not sure where to create content, then ask one of the tier0 team.

What are those --DOCID things

The --DOCIDX is an internal reference created by the import to Freshdesk. If you are creating a new document, that reference will be added automatically you don't need to do anything extra.

If the file you wish to edit has one of those already, then leave it intact; changing the --DOCID for an existing article will cause Bad Stuff (tm) to happen.

You can rename an article by changing the filename, but do still leave the --DOCID alone.

If you need to resubmit an article after a gerrit reset, remove the DOCID from the article title, the article will need to be submitted as a new article after a reset.

Approvers: Never merge a new article that has a DOCID already in the title (it makes docobot have a tantrum).

Making some changes

We use the branching feature of git to keep your changes separate from other peoples changes.

Before you create a branch, make sure your directory is up-to-date git checkout master
git pull
create a new git branch for your changes. The branch name should be one word and explain what your change is about. For example, the content you are reading was created on the "contributing" branch.

git branch branch_name

git checkout branch_name
if the file doesn't exist yet, then create it under the starting-doco folder.

it may get moved elsewhere after that, but it's a good start.

using your text editor, open the file you wish to edit.
make your changes to the file.

Some words about markdown

This README and also the documentation committed to this project were all created in GitHub flavoured markdown. Markdown is just a way of making plain text appear as structured formatted rich text. A simple example is by adding a # to the start of a line in markdown makes that line appear as a heading;

# The largest heading (an <h1> tag)

## The second largest heading (an <h2> tag)

There are heaps and heaps of ways of controlling the look and feel of your content via markdown. But Jenkins (we'll talk about him later) will be quite fussy about how your format your markdown. So while the best bet is to review the official documentation on GitHub flavoured markdown. just be aware, that what you produce will be tightly controlled by Jenkins.

New users may struggle with markdown, because unlike a word processor you don't get to see exactly how your content will appear to readers. That's because GitHub renders your markdown into HTML moments before readers see it. It's exactly the same as as when writing in other markup languages such as HTML.

One thing to note is that GitHub flavoured markdown will treat carriage returns in an interesting way. Carriage returns are ignored by GitHub unless they come in a pair. That means that the carriage return at the end of a line is ignored , but if it is followed immediately by another carraige return at the end of a paragraph, then GitHub will render your text as a paragraph.

It is possible to render your markdown locally, which is invaluable if you're creating content and you do care about how it appears to end users. This is possible using grip which does require you to have some familiarity with installing python packages, but for Ubuntu it's as simple as

$ sudo apt-get install python-pip

$ pip install grip

$ grip --gfm --context=NeCTAR-RC/nectarcloud-tier0doco README.md

And then I simply point my web browser at http://localhost:6419/ and voila, there's my markdown rendered into html.

You can also find tools such as online tools that will render markdown documents (e.g. https://stackedit.io/editor - copy/paste your text into the left pane)

The NeCTAR style guide

All commits to this repository must pass markdown validation as applied by a robot called Jenkins - he's pretty fussy - but can be tamed easily; more on that later. Where markdown may be valid, but stylistic choices are still possible, please consider the following.

Headings

H1 is for the page title and H2 onwards are for sub-headings. Jenkins will prevent you from putting a lower-number heading before a higher-number heading

Text

Markdown defaults to left aligned text, it's important not to change this as it's generally accepted that centred text is harder to read.

Underline is for hyperlinks ONLY. Instead, use bold or italics for emphasis.

Don't change the colour of the headings and paragraph text.

Links

All links should open in the same window, even external links. This ensures the website meets basic web accessibility standards. Yes, it's kind of annoying, but it means that the user gets to decide how they want their links to open.

Link text should be meaningful - don't use phrases like 'click here' - and should be embedded behind text where possible; try not to paste full URLs onto the page.

The syntax is in text link: [hypertext][link identifier] at the bottom of the page: [link identifier]: http://url

Images

Images should be stored in the "images" directory, which is in the same directory that the article is saved. You can then link to the images with e.g.:
![](images/articleIdentifier_imageName.png

We have not always used the article identifier as a prefix for the image name, so you won't see it used in all the submitted images. However, experience has taught us that it is invaluable to be able to identify which images belong with which article. Then if an article needs to be moved to a new directory, or be deleted, we can easily identify the associated images from the large combined "images" directory.

Hypertext table of contents for easy navigation

Hypertext links within the article are useful for creating an interactive table of contents with links to subheadings.

anchor syntax - place a couple of lines above the sub-heading: link syntax - hypertext

Submitting your changes for review

A host of people will be very excited to see your new changes and will help you ensure that your content meets the standards. For them to be able to see your content, you need to upload it back to Gerrit, and that's what git-review is for.

Assuming you made some changes to one or more files previously, you need to upload those changes for review to Gerrit. But before you can do that, you need to commit the changes to your local git repository.

you can see which files have changed by using

git status
if any of those are the files you care about, you should add them to your next commit.

git add <file>

Quick tip: use git add -A if you want to add ALL the files mentioned in the git status readout.
then you need to commit your changes

git commit -m 'a meaningful comment about the change you are committing'

adding a useful message which explains exactly what your commit is about. You should consider formatting your commit message with a less than 10 word subject up the top, then if any further explanation is required, do that in a separate paragraph underneath.

now you need to upload this change to Gerrit for review by Jenkins and others this step will fail, but that's ok for now. (Make sure you have installed the git plugin for Gerrit, git-review.)

git review

Why not git push? Good question. Because we're not pushing back to GitHub, we're having our commit reviewed by Gerrit. If Gerrit and others think your commit is ok, then (and only then) Gerrit will push to GitHub for you. You can't push directly to GitHub yourself because only Gerrit is authorized to push to the nectar GitHub repository.

For further information on making changes to NeCTAR repositories using git review, please refer to the NeCTAR wiki

Authenticating yourself to Gerrit

Okies, so by default, you are a stranger to Gerrit. When you do your first git review, git will use your ssh key to talk to the Gerrit server at review.rc.nectar.org.au. In the first instance, that will probably fail.

You will then need to create an account with Gerrit

Specifically, you need to make sure that your gerrit account (and it's associated username) have permissions to contribute to the tier0doco project. If you git review fails with an authentication error, then this is your issue. Log an issue with core services to have your account added.

Who the heck is Jenkins

It will happen sometimes that regardless how hard you try, somebody will find fault in your commit, and will ask that you amend it. It's important to remember, that should you be asked to review your commit, it's not a personal affront :) it's just the means by which the documentation standards can be maintained.

The first "person" to find fault will be Jenkins. Jenkins is a robot and he will ensure that your markdown meets the standards set by the lint ruleset You may like to keep that link handy; Jenkins is quite fussy, and you'll need to understand why he keeps complaining.

Some examples of Jenkins feedback;
./README.md:262: MD009 Trailing spaces
./README.md:263: MD009 Trailing spaces
./README.md:31: MD013 Line length
./README.md:138: MD022 Headers should be surrounded by blank lines
./README.md:119: MD024 Multiple headers with the same content
./README.md:237: MD026 Trailing punctuation in header
./README.md:49: MD032 Lists should be surrounded by blank lines
./README.md:51: MD032 Lists should be surrounded by blank lines
./README.md:53: MD032 Lists should be surrounded by blank lines

You'll need to fix each of those and when Jenkins finally accepts your change (see amending changes below), Jenkins will automatically vote (or +1) your commit.

Jenkins will often fail a document without giving any reasons. Using the following ruby-gem markdown lint style checker (mdl) will give you the reasons when Jenkins won't. It is a real timesaving tool!

Note; if you want to get really clever, you can install mdl - the same markdown parsing tool that Jenkins uses - that way you don't need to bother Jenkins for markdown related issues. You'll probably need ubuntu for this;

$ sudo apt-get install ruby
$ sudo gem install mdl
$ mdl README.md
README.md:4: MD013 Line length
README.md:4: MD009 Trailing spaces
README.md:51: MD032 Lists should be surrounded by blank lines
README.md:222: MD032 Lists should be surrounded by blank lines

or even better, markdown parsing in near realtime with watch mdl README.md

Once your markdown is clean, then do your git commit --amend

If you do decide to use mdl locally, there is a file in the root directory of the project named md_style.rb with rules that match those applied by Jenkins. There are further instructions in the file on how to use it.

This works for me (JoeyGerlach): mdl -s ~/nectarcloud-tier0doco/md_style.rb <filename> The -s option loads the style guide.

Getting Changes accepted

As well as Jenkins, actual people will read your changes. They - like Jenkins - will have their suggestions, and you will need to satisfy them as well so that your content can finally be accepted.

You need two +1 votes (or one +2) for your change to be accepted, merged and to appear back at GitHub.

This can take time. This README has currently been submitted a dozen times already. Apparently some commits in the OpenStack tree can take over 50 amendments before they are finally accepted (but don't worry, that's not likely to happen to you - we want your docs!).

What went wrong

Jenkins should email you advising what was wrong with your submission you follow that link you'll see the option on the left for the "console output",

click on that and scroll down and you'll see what Jenkins is complaining about in the build log.

You can also get there by finding your submission on the list on the Gerrit page gerrit.

Click on your submission, then scroll down the bottom you will see the Jenkins feedback;

click on that will show the hyperlink to Jenkins.

The hyperlink goes the build number that it assigned by the git review in Gerrit.

The "console output" on the left will show the build log and hopefully that will help you identify the error in your md file.

Amending your changes for review

So as we've seen, it's almost guaranteed your first commit will not be accepted (or "merged"). It's important that you don't submit your changes as a separate commit, but that you amend your existing commit.

That's a simple process of;

making the required changes
git add <filename>
git commit --amend
git review

And waiting for some more feedback via email.

See the NeCTAR wiki for more documentation on making changes after commiting.

After this, you can return to the master branch and update it. It is important to update the master branch each time before you create a new branch and make modifications. Use these commands before and after you make modifications to the git repository.

git checkout master
git pull

Cleaning up your local branches

This workflow can lead to a lot of local branches on your machine that have been merged into the master branch. If you want to delete one, the command

git branch -d <branch_name>

will remove it.

If you want to delete a lot of them, the utility script cleanup_branches.sh in the root directory of the project will do the job (it only works on Linux and OSX, sorry).

To use it, make sure you are in the root directory of the project, then type:

./cleanup_branches.sh

A word of Caution

We've learned a few cautionary tales by trial and error. Please add to this list if you dicover any new ways of making the system have a tantrum.

After your changes are merged, there is a script called "Docobot" that pushes the changes to freshdesk, which updates the website (usually within a minute of the change being merged). Sometimes changes are accepted and merged, but cause docobot to stop working as the changes are not compatible with the freshdesk settings.
- Don't make any new folders in the top category, or increase the number of sub folders allowed (i.e. no subfolders in Level 3, see below).
  - Level 1 - "Cloud expert" and "NeCTAR documentation" ONLY
  - Level 2 - Sub folders ONLY, e.g. "Cloud Basics", "Security guidelines"
  - Level 3 - .md articles, and a folder called "images" for the image files ONLY
- Adding sub-folders at level 2 has been successful (remember to add it without any DOCID, this will be assigned automatically). Add the folder at the same time as you add contents to the folder as docobot ignores empty folders.
- Never submit a new article or directory with a DOCID. Docobot will automatically add a DOCID after the merge. If Gerrit is reset for some reason (as a troubleshooting measure), you may need to re-commit a new article that was merged in the period that has been rewound. In this case, the article was given a DOCID already, but because of the reset, the DOCID needs to be deleted from the filename before it can be resubmitted.

Tips, tricks and troubleshooting

The title of the article is the same as the filename of your .md file (minus the DOCID bit). Thus it is important that you use spaces rather than underscores between words in the filename.
If you forget to checkout a new branch before making your changes, and have been modifying the master branch instead;
- Create a new branch and the modifications you have made will be transferred to this branch for you to add, commit and merge.
If there have been a lot of changes in the master branch since you did your last git pull, your changes may create a 'merge conflict'
- Create a local copy of any changes you have made (e.g. on your desktop)
- Delete the NeCTAR tier 0 directory from your computer, then clone it again with
  git clone https://github.com/NeCTAR-RC/nectarcloud-tier0doco.git
- Create a new branch and paste the modified/new articles into the directory
- Continue with adding and committing the changes as usual.

Some things Jenkins is fussy about - please add to list

There is not allowed to be punctuation at the end of a sub/heading
There is not allowed to be a single sentence paragraph with emphasis (use subheadings instead)
There must be blank lines before and after headings and lists (check for automatically inputted indentation spaces)
If there are MS-DOS line breaks, Jenkins won't recognise blank lines and will call errors. Convert your file to UNIX line breaks only.
Jenkins is very fussy about list syntax. Be consistent. If you want a numbered list with e.g. screenshots in between list elements, Jenkins won't let you assign numbers and will call each element '1. ' If you want to define your own list numbers, use parentheses e.g. 1) 2)... as Jenkins won't recognise this as a list and won't give you an error message.
If you want to preserve a single line break, use two spaces at the end of the line before hitting enter. This will prevent the lines from concatenating into a single line.

Name		Name	Last commit message	Last commit date
Latest commit History 761 Commits
articles		articles
images		images
mappings		mappings
script/configs		script/configs
starting-doco		starting-doco
.gitignore		.gitignore
.gitreview		.gitreview
Quick_guide_to_Document_Submission.md		Quick_guide_to_Document_Submission.md
README.md		README.md
cleanup_branches.sh		cleanup_branches.sh
md_style.rb		md_style.rb

NeCTAR-RC/nectarcloud-tier0doco

Folders and files

Latest commit

History

Repository files navigation