Z2M-ember-devlogs

Some dev stuff related to the new ember implementation (introducing PR) for zigbee-herdsman.

Logs are abbreviated to the relevant parts...

Backup/Restore

Number indicates time-order.

1. Forced a start of the NCP with just a network leave ("new adapter" state), then restored backup.
2. Used GENERATE to force forming from config (adapter/backup no match).
3. Restored backup after 2.
4. Same as 2. except removed backup file just to test code path.
5. One last restore from backup after "clean-slate" (clean form+MQTT restart just because...).

Other

Log excerpt

Interviews with a few different devices.

Internal Reset

Shows the NCP reset logic in action.

Save tokens

A couple fo runs of tokens exporting. Removed the actual tokens, just because...

NCP Counters

Retrieve 5min after start (hence the low numbers); with one device offline for testing.

• MAC_RX_BROADCAST: 44
• MAC_TX_BROADCAST: 62
• MAC_RX_UNICAST: 10
• MAC_TX_UNICAST_SUCCESS: 4
• MAC_TX_UNICAST_RETRY: 0
• MAC_TX_UNICAST_FAILED: 0
• APS_DATA_RX_BROADCAST: 3
• APS_DATA_TX_BROADCAST: 3
• APS_DATA_RX_UNICAST: 4
• APS_DATA_TX_UNICAST_SUCCESS: 3
• APS_DATA_TX_UNICAST_RETRY: 0
• APS_DATA_TX_UNICAST_FAILED: 2
• ROUTE_DISCOVERY_INITIATED: 8
• NEIGHBOR_ADDED: 1
• NEIGHBOR_REMOVED: 0
• NEIGHBOR_STALE: 0
• JOIN_INDICATION: 0
• CHILD_REMOVED: 0
• ASH_OVERFLOW_ERROR: 0
• ASH_FRAMING_ERROR: 0
• ASH_OVERRUN_ERROR: 0
• NWK_FRAME_COUNTER_FAILURE: 0
• APS_FRAME_COUNTER_FAILURE: 0
• ASH_XOFF: 0
• APS_LINK_KEY_NOT_AUTHORIZED: 0
• NWK_DECRYPTION_FAILURE: 0
• APS_DECRYPTION_FAILURE: 0
• ALLOCATE_PACKET_BUFFER_FAILURE: 0
• RELAYED_UNICAST: 0
• PHY_TO_MAC_QUEUE_LIMIT_REACHED: 0
• PACKET_VALIDATE_LIBRARY_DROPPED_COUNT: 0
• TYPE_NWK_RETRY_OVERFLOW: 0
• PHY_CCA_FAIL_COUNT: 0
• BROADCAST_TABLE_FULL: 0
• PTA_LO_PRI_REQUESTED: 0
• PTA_HI_PRI_REQUESTED: 0
• PTA_LO_PRI_DENIED: 0
• PTA_HI_PRI_DENIED: 0
• PTA_LO_PRI_TX_ABORTED: 0
• PTA_HI_PRI_TX_ABORTED: 0
• ADDRESS_CONFLICT_SENT: 0