permalink | sidebar | keywords | summary |
---|---|---|---|
copy-free/concept_port_requirements_for_communicating_with_7mtt.html |
sidebar |
ontap, transition, copy, free, port, requirements, 7, mode, tool |
The 7-Mode Transition Tool communicates with the 7-Mode system and the cluster over certain ports. You must ensure that these ports on the 7-Mode system and the cluster are open to allow communication with the 7-Mode Transition Tool. |
The 7-Mode Transition Tool communicates with the 7-Mode system and the cluster over certain ports. You must ensure that these ports on the 7-Mode system and the cluster are open to allow communication with the 7-Mode Transition Tool.
The 7-Mode Transition Tool communicates with the 7-Mode systems by using HTTPS on port 443.
The 7-Mode Transition Tool communicates with the cluster by using HTTPS on port 443.
Port 8444 of the 7-Mode Transition Tool must be open for the web interface.
To transition netgroups and CIFS local users and groups, the following requirements must be met:
-
Port 8088 of the 7-Mode Transition Tool must be available.
For an alternative to port 8088, you must change the port specified by the
tool.http.port
parameter in thetransition-tool.conf
file of the 7-Mode Transition Tool installation directory.NoteYou must restart the 7-Mode Transition Tool service after changing the port in the configuration file. -
Each node in the cluster must have at least one data LIF configured for the target SVM.
-
All SVM data LIFs must be able to communicate with the 7-Mode Transition Tool port 8088 or the port specified by the
tool.http.port
parameter in thetransition-tool.conf
file.NoteYou must verify that firewalls do not block this traffic.
Related information