Showing you your powerhouse of a computer at all times. Brought to you by a college student, his Twitch chat, and autogenerated music playlists.
If you'd like to build the bleeding edge commits, you'll need to clone/download the repo.
Desktopis for the MaxStats desktop client, and can be built using your choice of C# IDE such as Visual Studio or JetBrains Rider. It runs the .NET Framework v4.8.MCUis for the microcontroller board you're using, and is built with any PlatformIO compatible IDE, or the PlatformIO CLI app.
Currently the project in code only officially supports the Pro Micro board (or equivalent from AliExpress) and, experimentally, the Teensy (LC, 3.1, 3.2, and 3.6, requires edit to config.h). Currently only ST7735 and ST7789 screens are supported. Certain pins can be configured in MCU/include/config.h. See the pinout below for the default wiring of the Pro Micro board.
| Screen Pins (ST7735 & 89) | ProMicro Pins |
|---|---|
| VCC (Power) | VCC |
| GND (Ground) | GND |
| DIN (Data In) | 16 (MOSI) |
| CLK (Clock) | 15 (SCLK) |
| CS (Chip Select) | 10 |
| DC (Data Command) | 9 |
| RST (Reset) | 8 |
| BL (Backlight) | 7 |
The 3D printable parts are in Printables. The parts were designed to fit a ProMicro board (USB facing downward) and wires. I recommend printing the screen plate face down, and the body on its solid side with supports for the USB housing. The screen is held in with some friction from the body, no screws. If you feel it necessary, put some glue on the sides of the body where the screen parts meet.
All assets in this repository, excluding those provided and maintained by individuals aside from my own such as LibreHardwareMonitor, are licensed under the zlib license.
MaxStats (c) 2020 Logan "NotQuiteApex" Hickok-Dickson
- pbanj - tester and contributor
- T3knomanzer - inspiration with MaxMix project