case-for-pico-datalogger-rev1.00

Box/lid for

• https://github.com/bablokb/pcb-pico-datalogger (Rev 0.98)

The lid will fit CamdenBoss BIM2006/16-GY/GY ABS Case Grey 190 x 110 x 60mm 2000 Series (https://www.camdenboss.com/camden-boss/bim200616-gygy-2000-series-general-purpose-abs-enclosure%2c-grey%2c-abs-ul94-hb%2c-190x110x60mm/c-23/p-15857).

Additional PCB to hold sensors:

• https://github.com/OpenDevEd/sensor-stripboard-v1

Much better setup for sensor cutouts:

• https://github.com/OpenDevEd/sensors-openscad

Uses:

• QR Code generator for OpenSCAD https://github.com/ridercz/OpenSCAD-QR
• https://github.com/KitWallace/openscad/blob/master/braille.scad
• https://www.thingiverse.com/thing:668210/files
• https://github.com/adafruit/Adafruit_CAD_Parts

Sensors intended for this lid.

The slots are labeled in the model. The sensors used are

• AHT20 Adafruit Qw/St: temperature, humidity
• mcp9808 Adafruit, headers only: temperature
• AMB2301 Wired sensor: temperature, humidity
• SHT45 Adafruit Qw/St: temperature, humidity
• BH1750 Adafruit Qw/St: Luminance
• BH1745 Pimoroni Garden: Luminance, colour
• LTR 559 Pimoroni Garden: Luminance, proximity (~5cm)
• I2S MEMS Adafruit, headers only: sound

About

The code is fairly modular.