MIPS 32-bit huge page support #2
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Turn out it is not a DMC bug it is actually a HW one, so this workaround will be needed for current gens, lets update the comment and remove the FIXME. BSpec: 7723 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190406005112.27205-1-jose.souza@intel.com
PSR support for VLV and CHV was dropped in commit ce3508f ("drm/i915/psr: Nuke PSR support for VLV and CHV") so no need to keep this registers around. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190406005112.27205-2-jose.souza@intel.com
Even when driver is reloaded and hits this scenario the PSR mutex should be initialized, otherwise reading PSR debugfs status will execute mutex_lock() over a mutex that was not initialized. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190406005112.27205-3-jose.souza@intel.com
This interlaced mode restriction applies to all gens, not only to Haswell. Also while at it updating the debug message to. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190406005112.27205-4-jose.souza@intel.com
A couple of machines in the farm show quite frequent errors in the powerwells not being released. Either there is an external agent interferring with the powerwells, or the powerwell doesn't quite behave as we anticipate -- either way, the test is not reliable enough to be enabled by default in CI. It has served its immediate purpose in providing coverage as we made tweaks to forcewake, so keep it available for future testing. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110210 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190407192649.14750-1-chris@chris-wilson.co.uk
Push getting the reference for the encoders' power domains into the encoder get_power_domains() hook instead of doing this from the caller. This way the encoder can store away the corresponding wakerefs. This fixes the DSI encoder disabling, which didn't release these power references it acquired during HW state readout. Note that longtime ownership for the corresponding wakerefs can be thus acquired / released in two ways. Nevertheless there is always only one owner for them: After HW readout (booting/system resume): - encoder->get_power_domains() acquires - encoder->disable*() releases After a modeset (calling intel_atomic_commit()): - encoder->enable*() acquires - encoder->disable*() releases * can be any of the encoder enable/disable hooks. v2: - Check that the DSI io_wakerefs are unset both during encoder HW readout and enabling. (Chris) Fixes: 0e6e0be ("drm/i915: Markup paired operations on display power domains") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190407124655.31536-1-imre.deak@intel.com (cherry picked from commit 3a52fb7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: CK Hu <ck.hu@mediatek.com>
Add the bindings for the Bifrost family of ARM Mali GPUs. The Bifrost GPU architecture is similar to the Midgard family, but with a different Shader Core & Execution Engine structures. Bindings are based on the Midgard family bindings, but the inner architectural changes makes it a separate family needing separate bindings. The Bifrost GPUs are present in a number of recent SoCs, like the Amlogic G12A Family, and many other vendors. The Amlogic vendor specific compatible is added to handle the specific IP integration differences and dependencies. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> [narmstrong: fixed small typo in compatible description] Link: https://patchwork.freedesktop.org/patch/msgid/20190401080949.14550-1-narmstrong@baylibre.com
Circumvent the dance we currently perform to find the preempt_client and lookup its HW context for this engine, as we know we have already pinned the preempt_context on the engine. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190408091728.20207-15-chris@chris-wilson.co.uk
The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with : - an enhanced plane blender, with up to 3 OSD planes - support for AFBC 1.2 decoder (for Bifrost GPU) - support display mode up to 4k60@75Hz Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190313141030.5958-2-narmstrong@baylibre.com
… ports The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with support for HDMI 2.1 and a different DW-HDMI register access. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190313141030.5958-3-narmstrong@baylibre.com
Due to a clerical error,there is one zero less for 12800000. Fix it for 128000000 Fixes: 0fc721b ("drm/mediatek: add hdmi driver for MT2701 and MT7623") Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
On Amlogic G12A SoC, the 2,97GHz PLL frequency is not stable enough to provide a correct 297MHz pixel clock, so switch the PLL base frequency with a /2 OD when the 297MHz pixel clock is requested. This solves the issue on G12A and also works fine on GXBB, GXL & GXM. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-2-narmstrong@baylibre.com
This patch adds the new VPU registers added since the Amlogic GXM SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-3-narmstrong@baylibre.com
Amlogic G12A needs a different VPP setup code, handle it here. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-4-narmstrong@baylibre.com
Amlogic G12A SoC needs a different VIU setup code, handle it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-5-narmstrong@baylibre.com
Amlogic G12A SoC supports now up to 3 OSD planes (1 more than the previous SoCs) and a brand new OSD plane blender module. This patch uses the same OSD1 plane for G12A, using the exact same scaler and OSD1 setup registers, except using the new blender register to disable the plane. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed typo in commit log] Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-6-narmstrong@baylibre.com
Amlogic G12A SoC supports the same set of Video Planes, but now are handled by the new OSD plane blender module. This patch uses the same VD1 plane for G12A, using the exact same scaler and VD1 setup registers, except using the new blender register to disable the plane. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fix typo in commit log] Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-7-narmstrong@baylibre.com
This patch adds support for the new OSD+VD Plane blending module in the CRTC code by adding the G12A code to manage the blending module and setting the right OSD1 & VD1 plane registers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-8-narmstrong@baylibre.com
The Meson G12A SoCs uses the exact same CVBS encoder except a simple CVBS DAC register offset and settings delta. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed subject typo] Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-9-narmstrong@baylibre.com
While switching to the Common Clock Framework is still Work In Progress, this patch adds the corresponding G12A HDMI PLL setup to be on-par with the other SoCs support. The G12A has only a single tweak about the high frequency setup, where the HDMI PLL needs a specific setup to handle correctly the 5.94GHz DCO frequency. Apart that, it handls ecorrectly all the other HDMI frequencies and can achieve even better DMT clock frequency precision with the larger fractional dividier width. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-10-narmstrong@baylibre.com
Finally add the Amlogic G12A SoC compatible for the VPU driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-11-narmstrong@baylibre.com
The Amlogic G12A embeds the same Synopsys DW-HDMI Controller, but with : - a "backport" of the HDR signaling registers from more recent DW-HDMI controllers, this will need a tweak since it's not normally present on this version of the DW-HDMI controller - A direct mapping of TOP and DW-HDMI registers instead of an internal bus accessed using read/write registers - Support for RX-SENSE, but not yet implemented - Support for HDMI 2.1 Dynamic HDR, but not yet implemented - Different registers mapping for the HDMI PHY setup This patchs adds support for these changes while providing exact same support as the previous GXBB, GXL & GXM SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-12-narmstrong@baylibre.com
Recalculate the rate of this clock, by querying hardware to make implementation of recalc_rate() to match the definition. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
This is the first step to make MT2701 hdmi stable. The parent rate of hdmi phy had set by DPI driver. We should not set or change the parent rate of MT2701 hdmi phy, as a result we should remove the flags of "CLK_SET_RATE_PARENT" from the clock of MT2701 hdmi phy. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
This is the second step to make MT2701 HDMI stable. The factor depends on the divider of DPI in MT2701, therefore, we should fix this factor to the right and new one. Test: search ok Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
This is the third step to make MT2701 HDMI stable. We should not change the rate of parent for hdmi phy when doing round_rate for this clock. The parent clock of hdmi phy must be the same as it. We change it when doing set_rate only. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
This is essentially a revert of the commit a7588c8 ("ALSA: timer: Check ack_list emptiness instead of bit flag"). The intended change by the commit turns out to be insufficient, as snd_timer_close*() always calls snd_timer_stop() that deletes the ack_list beforehand. In theory, we can change the behavior of snd_timer_stop() to sync the pending ack_list, but this will become a deadlock for the callback like sequencer that calls again snd_timer_stop() from itself. So, reverting the change is a more straightforward solution. Fixes: a7588c8 ("ALSA: timer: Check ack_list emptiness instead of bit flag") Reported-by: syzbot+58813d77154713f4de15@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation does not support MMU-less plarforms. Suggested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: a1d2a63 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190409003617.4470-1-yuq825@gmail.com
To prevent build fail on some platform which does not have it in the include file chain. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Suggested-by: Randy Dunlap <rdunlap@infradead.org> Fixes: a1d2a63 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190409003617.4470-2-yuq825@gmail.com
pcercuei
pushed a commit
that referenced
this pull request
Sep 19, 2023
The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] MIPS#16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
pcercuei
pushed a commit
that referenced
this pull request
Sep 19, 2023
…prevent UAF" This reverts commit 9e46e4d. kbuild reports a warning in memblock_remove_region() because of a false positive caused by partial reset of the memblock state. Doing the full reset will remove the false positives, but will allow late use of memblock_free() to go unnoticed, so it is better to revert the offending commit. WARNING: CPU: 0 PID: 1 at mm/memblock.c:352 memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1)) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00001-g9e46e4dcd9d6 #2 RIP: 0010:memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1)) Call Trace: memblock_discard (kbuild/src/x86_64/mm/memblock.c:383) page_alloc_init_late (kbuild/src/x86_64/include/linux/find.h:208 kbuild/src/x86_64/include/linux/nodemask.h:266 kbuild/src/x86_64/mm/mm_init.c:2405) kernel_init_freeable (kbuild/src/x86_64/init/main.c:1325 kbuild/src/x86_64/init/main.c:1546) kernel_init (kbuild/src/x86_64/init/main.c:1439) ret_from_fork (kbuild/src/x86_64/arch/x86/kernel/process.c:145) ret_from_fork_asm (kbuild/src/x86_64/arch/x86/entry/entry_64.S:298) Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202307271656.447aa17e-oliver.sang@intel.com Signed-off-by: "Mike Rapoport (IBM)" <rppt@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pcercuei
pushed a commit
that referenced
this pull request
Sep 19, 2023
Hou Tao says: ==================== The patchset fixes two reported warning in cpu-map when running xdp_redirect_cpu and some RT threads concurrently. Patch #1 fixes the warning in __cpu_map_ring_cleanup() when kthread is stopped prematurely. Patch #2 fixes the warning in __xdp_return() when there are pending skbs in ptr_ring. Please see individual patches for more details. And comments are always welcome. ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
pcercuei
pushed a commit
that referenced
this pull request
Sep 19, 2023
…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.5, part #2 - Fixes for the configuration of SVE/SME traps when hVHE mode is in use - Allow use of pKVM on systems with FF-A implementations that are v1.0 compatible - Request/release percpu IRQs (arch timer, vGIC maintenance) correctly when pKVM is in use - Fix function prototype after __kvm_host_psci_cpu_entry() rename - Skip to the next instruction when emulating writes to TCR_EL1 on AmpereOne systems
pcercuei
pushed a commit
that referenced
this pull request
Sep 19, 2023
Ido Schimmel says: ==================== nexthop: Nexthop dump fixes Patches #1 and #3 fix two problems related to nexthops and nexthop buckets dump, respectively. Patch #2 is a preparation for the third patch. The pattern described in these patches of splitting the NLMSG_DONE to a separate response is prevalent in other rtnetlink dump callbacks. I don't know if it's because I'm missing something or if this was done intentionally to ensure the message is delivered to user space. After commit 0642840 ("af_netlink: ensure that NLMSG_DONE never fails in dumps") this is no longer necessary and I can improve these dump callbacks assuming this analysis is correct. No regressions in existing tests: # ./fib_nexthops.sh [...] Tests passed: 230 Tests failed: 0 ==================== Link: https://lore.kernel.org/r/20230808075233.3337922-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pcercuei
pushed a commit
that referenced
this pull request
Sep 19, 2023
When the tdm lane mask is computed, the driver currently fills the 1st lane before moving on to the next. If the stream has less channels than the lanes can accommodate, slots will be disabled on the last lanes. Unfortunately, the HW distribute channels in a different way. It distribute channels in pair on each lanes before moving on the next slots. This difference leads to problems if a device has an interface with more than 1 lane and with more than 2 slots per lane. For example: a playback interface with 2 lanes and 4 slots each (total 8 slots - zero based numbering) - Playing a 8ch stream: - All slots activated by the driver - channel #2 will be played on lane #1 - slot #0 following HW placement - Playing a 4ch stream: - Lane #1 disabled by the driver - channel #2 will be played on lane #0 - slot #2 This behaviour is obviously not desirable. Change the way slots are activated on the TDM lanes to follow what the HW does and make sure each channel always get mapped to the same slot/lane. Fixes: 1a11d88 ("ASoC: meson: add tdm formatter base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
pcercuei
pushed a commit
that referenced
this pull request
Sep 19, 2023
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the /proc/powerpc/rtas/firmware_update interface to prepare a system firmware update yields a BUG(): kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2 Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000 REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c CFAR: c0000000001fbd34 IRQMASK: 0 [ ... GPRs omitted ... ] NIP usercopy_abort+0xa0/0xb0 LR usercopy_abort+0x9c/0xb0 Call Trace: usercopy_abort+0x9c/0xb0 (unreliable) __check_heap_object+0x1b4/0x1d0 __check_object_size+0x2d0/0x380 rtas_flash_write+0xe4/0x250 proc_reg_write+0xfc/0x160 vfs_write+0xfc/0x4e0 ksys_write+0x90/0x160 system_call_exception+0x178/0x320 system_call_common+0x160/0x2c4 The blocks of the firmware image are copied directly from user memory to objects allocated from flash_block_cache, so flash_block_cache must be created using kmem_cache_create_usercopy() to mark it safe for user access. Fixes: 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> [mpe: Trim and indent oops] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
[ Upstream commit 8d21155 ] adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled when unlock. DEADLOCK might happen if we have held other locks and disabled IRQ before invoking it. Fix it by using spin_lock_irqsave() instead, which can keep IRQ state consistent with before when unlock. ================================ WARNING: inconsistent lock state 5.10.0-02758-g8e5f91fd772f MIPS#26 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 {IN-HARDIRQ-W} state was registered at: __lock_acquire+0x3d7/0x1070 lock_acquire+0x197/0x4a0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3b/0x60 bfq_idle_slice_timer_body bfq_idle_slice_timer+0x53/0x1d0 __run_hrtimer+0x477/0xa70 __hrtimer_run_queues+0x1c6/0x2d0 hrtimer_interrupt+0x302/0x9e0 local_apic_timer_interrupt __sysvec_apic_timer_interrupt+0xfd/0x420 run_sysvec_on_irqstack_cond sysvec_apic_timer_interrupt+0x46/0xa0 asm_sysvec_apic_timer_interrupt+0x12/0x20 irq event stamp: 837522 hardirqs last enabled at (837521): [<ffffffff84b9419d>] __raw_spin_unlock_irqrestore hardirqs last enabled at (837521): [<ffffffff84b9419d>] _raw_spin_unlock_irqrestore+0x3d/0x40 hardirqs last disabled at (837522): [<ffffffff84b93fa3>] __raw_spin_lock_irq hardirqs last disabled at (837522): [<ffffffff84b93fa3>] _raw_spin_lock_irq+0x43/0x50 softirqs last enabled at (835852): [<ffffffff84e00558>] __do_softirq+0x558/0x8ec softirqs last disabled at (835845): [<ffffffff84c010ff>] asm_call_irq_on_stack+0xf/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bfqd->lock); <Interrupt> lock(&bfqd->lock); *** DEADLOCK *** 3 locks held by kworker/2:3/388: #0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0 #1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0 OpenDingux#2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq OpenDingux#2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 stack backtrace: CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f MIPS#26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kthrotld blk_throtl_dispatch_work_fn Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 print_usage_bug valid_state mark_lock_irq.cold+0x32/0x3a mark_lock+0x693/0xbc0 mark_held_locks+0x9e/0xe0 __trace_hardirqs_on_caller lockdep_hardirqs_on_prepare.part.0+0x151/0x360 trace_hardirqs_on+0x5b/0x180 __raw_spin_unlock_irq _raw_spin_unlock_irq+0x24/0x40 spin_unlock_irq adjust_inuse_and_calc_cost+0x4fb/0x970 ioc_rqos_merge+0x277/0x740 __rq_qos_merge+0x62/0xb0 rq_qos_merge bio_attempt_back_merge+0x12c/0x4a0 blk_mq_sched_try_merge+0x1b6/0x4d0 bfq_bio_merge+0x24a/0x390 __blk_mq_sched_bio_merge+0xa6/0x460 blk_mq_sched_bio_merge blk_mq_submit_bio+0x2e7/0x1ee0 __submit_bio_noacct_mq+0x175/0x3b0 submit_bio_noacct+0x1fb/0x270 blk_throtl_dispatch_work_fn+0x1ef/0x2b0 process_one_work+0x83e/0x13f0 process_scheduled_works worker_thread+0x7e3/0xd80 kthread+0x353/0x470 ret_from_fork+0x1f/0x30 Fixes: b0853ab ("blk-iocost: revamp in-period donation snapbacks") Signed-off-by: Li Nan <linan122@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20230527091904.3001833-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
[ Upstream commit 904e6dd ] Change mark_chain_precision() to track precision in situations like below: r2 = unknown value ... --- state #0 --- ... r1 = r2 // r1 and r2 now share the same ID ... --- state #1 {r1.id = A, r2.id = A} --- ... if (r2 > 10) goto exit; // find_equal_scalars() assigns range to r1 ... --- state OpenDingux#2 {r1.id = A, r2.id = A} --- r3 = r10 r3 += r1 // need to mark both r1 and r2 At the beginning of the processing of each state, ensure that if a register with a scalar ID is marked as precise, all registers sharing this ID are also marked as precise. This property would be used by a follow-up change in regsafe(). Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230613153824.3324830-2-eddyz87@gmail.com Stable-dep-of: 1ffc85d ("bpf: Verify scalar ids mapping in regsafe() using check_ids()") Signed-off-by: Sasha Levin <sashal@kernel.org>
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
[ Upstream commit ce3aee7 ] syzkaller reported use-after-free in __gtp_encap_destroy(). [0] It shows the same process freed sk and touched it illegally. Commit e198987 ("gtp: fix suspicious RCU usage") added lock_sock() and release_sock() in __gtp_encap_destroy() to protect sk->sk_user_data, but release_sock() is called after sock_put() releases the last refcnt. [0]: BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:96 [inline] BUG: KASAN: slab-use-after-free in atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline] BUG: KASAN: slab-use-after-free in queued_spin_lock include/asm-generic/qspinlock.h:111 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock include/linux/spinlock.h:186 [inline] BUG: KASAN: slab-use-after-free in __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline] BUG: KASAN: slab-use-after-free in _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178 Write of size 4 at addr ffff88800dbef398 by task syz-executor.2/2401 CPU: 1 PID: 2401 Comm: syz-executor.2 Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 OpenDingux#2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x72/0xa0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:351 [inline] print_report+0xcc/0x620 mm/kasan/report.c:462 kasan_report+0xb2/0xe0 mm/kasan/report.c:572 check_region_inline mm/kasan/generic.c:181 [inline] kasan_check_range+0x39/0x1c0 mm/kasan/generic.c:187 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline] queued_spin_lock include/asm-generic/qspinlock.h:111 [inline] do_raw_spin_lock include/linux/spinlock.h:186 [inline] __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline] _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:355 [inline] release_sock+0x1f/0x1a0 net/core/sock.c:3526 gtp_encap_disable_sock drivers/net/gtp.c:651 [inline] gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664 gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728 unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841 rtnl_delete_link net/core/rtnetlink.c:3216 [inline] rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268 rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423 netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x1b7/0x200 net/socket.c:747 ____sys_sendmsg+0x75a/0x990 net/socket.c:2493 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547 __sys_sendmsg+0xfe/0x1d0 net/socket.c:2576 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f1168b1fe5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f1167edccc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f1168b1fe5d RDX: 0000000000000000 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f1168b80530 R15: 0000000000000000 </TASK> Allocated by task 1483: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x59/0x70 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:186 [inline] slab_post_alloc_hook mm/slab.h:711 [inline] slab_alloc_node mm/slub.c:3451 [inline] slab_alloc mm/slub.c:3459 [inline] __kmem_cache_alloc_lru mm/slub.c:3466 [inline] kmem_cache_alloc+0x16d/0x340 mm/slub.c:3475 sk_prot_alloc+0x5f/0x280 net/core/sock.c:2073 sk_alloc+0x34/0x6c0 net/core/sock.c:2132 inet6_create net/ipv6/af_inet6.c:192 [inline] inet6_create+0x2c7/0xf20 net/ipv6/af_inet6.c:119 __sock_create+0x2a1/0x530 net/socket.c:1535 sock_create net/socket.c:1586 [inline] __sys_socket_create net/socket.c:1623 [inline] __sys_socket_create net/socket.c:1608 [inline] __sys_socket+0x137/0x250 net/socket.c:1651 __do_sys_socket net/socket.c:1664 [inline] __se_sys_socket net/socket.c:1662 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1662 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 2401: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:521 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free mm/kasan/common.c:200 [inline] __kasan_slab_free+0x10c/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:162 [inline] slab_free_hook mm/slub.c:1781 [inline] slab_free_freelist_hook mm/slub.c:1807 [inline] slab_free mm/slub.c:3786 [inline] kmem_cache_free+0xb4/0x490 mm/slub.c:3808 sk_prot_free net/core/sock.c:2113 [inline] __sk_destruct+0x500/0x720 net/core/sock.c:2207 sk_destruct+0xc1/0xe0 net/core/sock.c:2222 __sk_free+0xed/0x3d0 net/core/sock.c:2233 sk_free+0x7c/0xa0 net/core/sock.c:2244 sock_put include/net/sock.h:1981 [inline] __gtp_encap_destroy+0x165/0x1b0 drivers/net/gtp.c:634 gtp_encap_disable_sock drivers/net/gtp.c:651 [inline] gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664 gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728 unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841 rtnl_delete_link net/core/rtnetlink.c:3216 [inline] rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268 rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423 netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x1b7/0x200 net/socket.c:747 ____sys_sendmsg+0x75a/0x990 net/socket.c:2493 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547 __sys_sendmsg+0xfe/0x1d0 net/socket.c:2576 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc The buggy address belongs to the object at ffff88800dbef300 which belongs to the cache UDPv6 of size 1344 The buggy address is located 152 bytes inside of freed 1344-byte region [ffff88800dbef300, ffff88800dbef840) The buggy address belongs to the physical page: page:00000000d31bfed5 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800dbeed40 pfn:0xdbe8 head:00000000d31bfed5 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff888008ee0801 flags: 0x100000000010200(slab|head|node=0|zone=1) page_type: 0xffffffff() raw: 0100000000010200 ffff88800c7a3000 dead000000000122 0000000000000000 raw: ffff88800dbeed40 0000000080160015 00000001ffffffff ffff888008ee0801 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800dbef280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800dbef300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88800dbef380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88800dbef400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800dbef480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: e198987 ("gtp: fix suspicious RCU usage") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/r/20230622213231.24651-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
[ Upstream commit 6f67fbf ] The `shift` variable which indicates the offset in the string at which to start matching the pattern is initialized to `bm->patlen - 1`, but it is not reset when a new block is retrieved. This means the implemen- tation may start looking at later and later positions in each successive block and miss occurrences of the pattern at the beginning. E.g., consider a HTTP packet held in a non-linear skb, where the HTTP request line occurs in the second block: [... 52 bytes of packet headers ...] GET /bmtest HTTP/1.1\r\nHost: www.example.com\r\n\r\n and the pattern is "GET /bmtest". Once the first block comprising the packet headers has been examined, `shift` will be pointing to somewhere near the end of the block, and so when the second block is examined the request line at the beginning will be missed. Reinitialize the variable for each new block. Fixes: 8082e4e ("[LIB]: Boyer-Moore extension for textsearch infrastructure strike OpenDingux#2") Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1390 Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
[ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 OpenDingux#2 0x556701d70589 in perf_env__cpuid util/env.c:465 OpenDingux#3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 OpenDingux#4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 OpenDingux#5 0x556701d8f78b in evsel__config util/evsel.c:1366 OpenDingux#6 0x556701ef5872 in evlist__config util/record.c:108 OpenDingux#7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 OpenDingux#8 0x556701cacd07 in run_test tests/builtin-test.c:236 OpenDingux#9 0x556701cacfac in test_and_print tests/builtin-test.c:265 OpenDingux#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 OpenDingux#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 OpenDingux#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 OpenDingux#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 OpenDingux#14 0x556701d3be90 in run_argv tools/perf/perf.c:421 OpenDingux#15 0x556701d3c3f8 in main tools/perf/perf.c:537 MIPS#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Ravi Bangoria <ravi.bangoria@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20230613235416.1650755-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
[ Upstream commit b684c09 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 OpenDingux#2 0x0000000000000063 in ?? () OpenDingux#3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 OpenDingux#2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 OpenDingux#3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 OpenDingux#4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 OpenDingux#5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 OpenDingux#6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 OpenDingux#7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 OpenDingux#8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 OpenDingux#9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 OpenDingux#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 OpenDingux#11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
[ Upstream commit 303c9c6 ] Changes in VFIO caused a pseudo-device to be created as child of fsl-mc devices causing a crash [1] when trying to bind a fsl-mc device to VFIO. Fix this by checking the device type when enumerating fsl-mc child devices. [1] Modules linked in: Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP CPU: 6 PID: 1289 Comm: sh Not tainted 6.2.0-rc5-00047-g7c46948a6e9c OpenDingux#2 Hardware name: NXP Layerscape LX2160ARDB (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mc_send_command+0x24/0x1f0 lr : dprc_get_obj_region+0xfc/0x1c0 sp : ffff80000a88b900 x29: ffff80000a88b900 x28: ffff48a9429e1400 x27: 00000000000002b2 x26: ffff48a9429e1718 x25: 0000000000000000 x24: 0000000000000000 x23: ffffd59331ba3918 x22: ffffd59331ba3000 x21: 0000000000000000 x20: ffff80000a88b9b8 x19: 0000000000000000 x18: 0000000000000001 x17: 7270642f636d2d6c x16: 73662e3030303030 x15: ffffffffffffffff x14: ffffd59330f1d668 x13: ffff48a8727dc389 x12: ffff48a8727dc386 x11: 0000000000000002 x10: 00008ceaf02f35d4 x9 : 0000000000000012 x8 : 0000000000000000 x7 : 0000000000000006 x6 : ffff80000a88bab0 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000a88b9e8 x2 : ffff80000a88b9e8 x1 : 0000000000000000 x0 : ffff48a945142b80 Call trace: mc_send_command+0x24/0x1f0 dprc_get_obj_region+0xfc/0x1c0 fsl_mc_device_add+0x340/0x590 fsl_mc_obj_device_add+0xd0/0xf8 dprc_scan_objects+0x1c4/0x340 dprc_scan_container+0x38/0x60 vfio_fsl_mc_probe+0x9c/0xf8 fsl_mc_driver_probe+0x24/0x70 really_probe+0xbc/0x2a8 __driver_probe_device+0x78/0xe0 device_driver_attach+0x30/0x68 bind_store+0xa8/0x130 drv_attr_store+0x24/0x38 sysfs_kf_write+0x44/0x60 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x334/0x448 ksys_write+0x68/0xf0 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x108 el0_svc_common.constprop.1+0x94/0xf8 do_el0_svc+0x38/0xb0 el0_svc+0x20/0x50 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x174/0x178 Code: aa0103f4 a9025bf5 d5384100 b9400801 (79401260) ---[ end trace 0000000000000000 ]--- Fixes: 3c28a76 ("vfio: Add struct device to vfio_device") Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Message-ID: <20230613160718.29500-1-laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
[ Upstream commit 2fb48d8 ] When a device-mapper device is passing through the inline encryption support of an underlying device, calls to blk_crypto_evict_key() take the blk_crypto_profile::lock of the device-mapper device, then take the blk_crypto_profile::lock of the underlying device (nested). This isn't a real deadlock, but it causes a lockdep report because there is only one lock class for all instances of this lock. Lockdep subclasses don't really work here because the hierarchy of block devices is dynamic and could have more than 2 levels. Instead, register a dynamic lock class for each blk_crypto_profile, and associate that with the lock. This avoids false-positive lockdep reports like the following: ============================================ WARNING: possible recursive locking detected 6.4.0-rc5 OpenDingux#2 Not tainted -------------------------------------------- fscryptctl/1421 is trying to acquire lock: ffffff80829ca418 (&profile->lock){++++}-{3:3}, at: __blk_crypto_evict_key+0x44/0x1c0 but task is already holding lock: ffffff8086b68ca8 (&profile->lock){++++}-{3:3}, at: __blk_crypto_evict_key+0xc8/0x1c0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&profile->lock); lock(&profile->lock); *** DEADLOCK *** May be due to missing lock nesting notation Fixes: 1b26283 ("block: Keyslot Manager for Inline Encryption") Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230610061139.212085-1-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
citral23
pushed a commit
to citral23/linux-1
that referenced
this pull request
Sep 20, 2023
commit 5eda1ad upstream. Thread #1: [122554.641906][ T92] f2fs_getxattr+0xd4/0x5fc -> waiting for f2fs_down_read(&F2FS_I(inode)->i_xattr_sem); [122554.641927][ T92] __f2fs_get_acl+0x50/0x284 [122554.641948][ T92] f2fs_init_acl+0x84/0x54c [122554.641969][ T92] f2fs_init_inode_metadata+0x460/0x5f0 [122554.641990][ T92] f2fs_add_inline_entry+0x11c/0x350 -> Locked dir->inode_page by f2fs_get_node_page() [122554.642009][ T92] f2fs_do_add_link+0x100/0x1e4 [122554.642025][ T92] f2fs_create+0xf4/0x22c [122554.642047][ T92] vfs_create+0x130/0x1f4 Thread OpenDingux#2: [123996.386358][ T92] __get_node_page+0x8c/0x504 -> waiting for dir->inode_page lock [123996.386383][ T92] read_all_xattrs+0x11c/0x1f4 [123996.386405][ T92] __f2fs_setxattr+0xcc/0x528 [123996.386424][ T92] f2fs_setxattr+0x158/0x1f4 -> f2fs_down_write(&F2FS_I(inode)->i_xattr_sem); [123996.386443][ T92] __f2fs_set_acl+0x328/0x430 [123996.386618][ T92] f2fs_set_acl+0x38/0x50 [123996.386642][ T92] posix_acl_chmod+0xc8/0x1c8 [123996.386669][ T92] f2fs_setattr+0x5e0/0x6bc [123996.386689][ T92] notify_change+0x4d8/0x580 [123996.386717][ T92] chmod_common+0xd8/0x184 [123996.386748][ T92] do_fchmodat+0x60/0x124 [123996.386766][ T92] __arm64_sys_fchmodat+0x28/0x3c Cc: <stable@vger.kernel.org> Fixes: 27161f1 "f2fs: avoid race in between read xattr & write xattr" Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
The following warning was reported when running "./test_progs -a link_api -a linked_list" on a RISC-V QEMU VM: ------------[ cut here ]------------ WARNING: CPU: 3 PID: 261 at kernel/bpf/memalloc.c:342 bpf_mem_refill Modules linked in: bpf_testmod(OE) CPU: 3 PID: 261 Comm: test_progs- ... 6.5.0-rc5-01743-gdcb152bb8328 #2 Hardware name: riscv-virtio,qemu (DT) epc : bpf_mem_refill+0x1fc/0x206 ra : irq_work_single+0x68/0x70 epc : ffffffff801b1bc4 ra : ffffffff8015fe84 sp : ff2000000001be20 gp : ffffffff82d26138 tp : ff6000008477a800 t0 : 0000000000046600 t1 : ffffffff812b6ddc t2 : 0000000000000000 s0 : ff2000000001be70 s1 : ff5ffffffffe8998 a0 : ff5ffffffffe8998 a1 : ff600003fef4b000 a2 : 000000000000003f a3 : ffffffff80008250 a4 : 0000000000000060 a5 : 0000000000000080 a6 : 0000000000000000 a7 : 0000000000735049 s2 : ff5ffffffffe8998 s3 : 0000000000000022 s4 : 0000000000001000 s5 : 0000000000000007 s6 : ff5ffffffffe8570 s7 : ffffffff82d6bd30 s8 : 000000000000003f s9 : ffffffff82d2c5e8 s10: 000000000000ffff s11: ffffffff82d2c5d8 t3 : ffffffff81ea8f28 t4 : 0000000000000000 t5 : ff6000008fd28278 t6 : 0000000000040000 [<ffffffff801b1bc4>] bpf_mem_refill+0x1fc/0x206 [<ffffffff8015fe84>] irq_work_single+0x68/0x70 [<ffffffff8015feb4>] irq_work_run_list+0x28/0x36 [<ffffffff8015fefa>] irq_work_run+0x38/0x66 [<ffffffff8000828a>] handle_IPI+0x3a/0xb4 [<ffffffff800a5c3a>] handle_percpu_devid_irq+0xa4/0x1f8 [<ffffffff8009fafa>] generic_handle_domain_irq+0x28/0x36 [<ffffffff800ae570>] ipi_mux_process+0xac/0xfa [<ffffffff8000a8ea>] sbi_ipi_handle+0x2e/0x88 [<ffffffff8009fafa>] generic_handle_domain_irq+0x28/0x36 [<ffffffff807ee70e>] riscv_intc_irq+0x36/0x4e [<ffffffff812b5d3a>] handle_riscv_irq+0x54/0x86 [<ffffffff812b6904>] do_irq+0x66/0x98 ---[ end trace 0000000000000000 ]--- The warning is due to WARN_ON_ONCE(tgt->unit_size != c->unit_size) in free_bulk(). The direct reason is that a object is allocated and freed by bpf_mem_caches with different unit_size. The root cause is that KMALLOC_MIN_SIZE is 64 and there is no 96-bytes slab cache in the specific VM. When linked_list test allocates a 72-bytes object through bpf_obj_new(), bpf_global_ma will allocate it from a bpf_mem_cache with 96-bytes unit_size, but this bpf_mem_cache is backed by 128-bytes slab cache. When the object is freed, bpf_mem_free() uses ksize() to choose the corresponding bpf_mem_cache. Because the object is allocated from 128-bytes slab cache, ksize() returns 128, bpf_mem_free() chooses a 128-bytes bpf_mem_cache to free the object and triggers the warning. A similar warning will also be reported when using CONFIG_SLAB instead of CONFIG_SLUB in a x86-64 kernel. Because CONFIG_SLUB defines KMALLOC_MIN_SIZE as 8 but CONFIG_SLAB defines KMALLOC_MIN_SIZE as 32. An alternative fix is to use kmalloc_size_round() in bpf_mem_alloc() to choose a bpf_mem_cache which has the same unit_size with the backing slab cache, but it may introduce performance degradation, so fix the warning by adjusting the indexes in size_index according to the value of KMALLOC_MIN_SIZE just like setup_kmalloc_cache_index_table() does. Fixes: 822fb26 ("bpf: Add a hint to allocated objects.") Reported-by: Björn Töpel <bjorn@kernel.org> Closes: https://lore.kernel.org/bpf/87jztjmmy4.fsf@all.your.base.are.belong.to.us Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230908133923.2675053-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
Hou Tao says: ==================== Fix the unmatched unit_size of bpf_mem_cache From: Hou Tao <houtao1@huawei.com> Hi, The patchset aims to fix the reported warning [0] when the unit_size of bpf_mem_cache is mismatched with the object size of underly slab-cache. Patch #1 fixes the warning by adjusting size_index according to the value of KMALLOC_MIN_SIZE, so bpf_mem_cache with unit_size which is smaller than KMALLOC_MIN_SIZE or is not aligned with KMALLOC_MIN_SIZE will be redirected to bpf_mem_cache with bigger unit_size. Patch #2 doesn't do prefill for these redirected bpf_mem_cache to save memory. Patch #3 adds further error check in bpf_mem_alloc_init() to ensure the unit_size and object_size are always matched and to prevent potential issues due to the mismatch. Please see individual patches for more details. And comments are always welcome. [0]: https://lore.kernel.org/bpf/87jztjmmy4.fsf@all.your.base.are.belong.to.us ==================== Link: https://lore.kernel.org/r/20230908133923.2675053-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6
#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2
#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9
#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32
#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6
#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8
#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8
#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9
#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8
#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15
#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9
#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8
#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5
#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9
#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11
#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8
MIPS#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2
MIPS#17 0x55fb0f941dab in main tools/perf/perf.c:535:3
```
Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
Sebastian Andrzej Siewior says: ==================== net: hsr: Properly parse HSRv1 supervisor frames. this is a follow-up to https://lore.kernel.org/all/20230825153111.228768-1-lukma@denx.de/ replacing https://lore.kernel.org/all/20230914124731.1654059-1-lukma@denx.de/ by grabing/ adding tags and reposting with a commit message plus a missing __packed to a struct (#2) plus extending the testsuite to sover HSRv1 which is what broke here (#3-#5). HSRv0 is (was) not affected. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
Specific stress involving frequent CPU-hotplug operations, such as running rcutorture for example, may trigger the following message: NOHZ tick-stop error: local softirq work is pending, handler #2!!!" This happens in the CPU-down hotplug process, after CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this fragile intermediate state, softirqs waiting for threaded handling may be forever ignored and eventually reported by the idle task as in the above example. However some vectors are known to be safe as long as the corresponding subsystems have teardown callbacks handling the migration of their events. The above error message reports pending timers softirq although this vector can be considered as hotplug safe because the CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration of timers after the death of the CPU. Hrtimers also have a similar hotplug handling. Therefore this error message, as far as (hr-)timers are concerned, can be considered spurious and the relevant softirq vectors can be marked as hotplug safe. Fixes: 0345691 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] MIPS#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 MIPS#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] MIPS#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] MIPS#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 MIPS#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
The following panic can happen when mmap is called before the pmu add callback which sets the hardware counter index: this happens for example with the following command `perf record --no-bpf-event -n kill`. [ 99.461486] CPU: 1 PID: 1259 Comm: perf Tainted: G E 6.6.0-rc4ubuntu-defconfig #2 [ 99.461669] Hardware name: riscv-virtio,qemu (DT) [ 99.461748] epc : pmu_sbi_set_scounteren+0x42/0x44 [ 99.462337] ra : smp_call_function_many_cond+0x126/0x5b0 [ 99.462369] epc : ffffffff809f9d24 ra : ffffffff800f93e0 sp : ff60000082153aa0 [ 99.462407] gp : ffffffff82395c98 tp : ff6000009a218040 t0 : ff6000009ab3a4f0 [ 99.462425] t1 : 0000000000000004 t2 : 0000000000000100 s0 : ff60000082153ab0 [ 99.462459] s1 : 0000000000000000 a0 : ff60000098869528 a1 : 0000000000000000 [ 99.462473] a2 : 000000000000001f a3 : 0000000000f00000 a4 : fffffffffffffff8 [ 99.462488] a5 : 00000000000000cc a6 : 0000000000000000 a7 : 0000000000735049 [ 99.462502] s2 : 0000000000000001 s3 : ffffffff809f9ce2 s4 : ff60000098869528 [ 99.462516] s5 : 0000000000000002 s6 : 0000000000000004 s7 : 0000000000000001 [ 99.462530] s8 : ff600003fec98bc0 s9 : ffffffff826c5890 s10: ff600003fecfcde0 [ 99.462544] s11: ff600003fec98bc0 t3 : ffffffff819e2558 t4 : ff1c000004623840 [ 99.462557] t5 : 0000000000000901 t6 : ff6000008feeb890 [ 99.462570] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 99.462658] [<ffffffff809f9d24>] pmu_sbi_set_scounteren+0x42/0x44 [ 99.462979] Code: 1060 4785 97bb 00d7 8fd9 9073 1067 6422 0141 8082 (9002) 0013 [ 99.463335] Kernel BUG [#2] To circumvent this, try to enable userspace access to the hardware counter when it is selected in addition to when the event is mapped. And vice-versa when the event is stopped/unmapped. Fixes: cc4c07c ("drivers: perf: Implement perf event mmap support in the SBI backend") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20231006082010.11963-1-alexghiti@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
pcercuei
pushed a commit
that referenced
this pull request
Nov 29, 2023
…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.6, take #2 - Fix the handling of the phycal timer offset when FEAT_ECV and CNTPOFF_EL2 are implemented. - Restore the functionnality of Permission Indirection that was broken by the Fine Grained Trapping rework - Cleanup some PMU event sharing code
sydarn
pushed a commit
to sydarn/linux
that referenced
this pull request
Jan 29, 2024
Coverity Scan reports the following issue. But it's impossible that mlx5_get_dev_index returns 7 for PF, even if the index is calculated from PCI FUNC ID. So add the checking to make coverity slience. CID 610894 (OpenDingux#2 of 2): Out-of-bounds write (OVERRUN) Overrunning array esw->fdb_table.offloads.peer_miss_rules of 4 8-byte elements at element index 7 (byte offset 63) using index mlx5_get_dev_index(peer_dev) (which evaluates to 7). Fixes: 9bee385 ("net/mlx5: E-switch, refactor FDB miss rule add/remove") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
sydarn
pushed a commit
to sydarn/linux
that referenced
this pull request
Jan 29, 2024
syzbot found a potential circular dependency leading to a deadlock:
-> OpenDingux#3 (&hdev->req_lock){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> OpenDingux#2 (rfkill_global_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045
hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622
__vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline]
vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374
vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline]
vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511
call_write_iter include/linux/fs.h:2109 [inline]
new_sync_write fs/read_write.c:509 [inline]
vfs_write+0xaa8/0xcf5 fs/read_write.c:596
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> OpenDingux#1 (&data->open_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75
hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989
hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline]
hci_sched_acl net/bluetooth/hci_core.c:3583 [inline]
hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654
process_one_work+0x901/0xfb8 kernel/workqueue.c:2310
worker_thread+0xa67/0x1003 kernel/workqueue.c:2457
kthread+0x36a/0x430 kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
-> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3053 [inline]
check_prevs_add kernel/locking/lockdep.c:3172 [inline]
validate_chain kernel/locking/lockdep.c:3787 [inline]
__lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011
lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622
__flush_work+0xee/0x19f kernel/workqueue.c:3090
hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352
hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
This change removes the need for acquiring the open_mutex in
vhci_send_frame, thus eliminating the potential deadlock while
maintaining the required packet ordering.
Fixes: 92d4abd ("Bluetooth: vhci: Fix race when opening vhci device")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sydarn
pushed a commit
to sydarn/linux
that referenced
this pull request
Jan 29, 2024
Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-20231208+ #0 Tainted: G O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8
but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> OpenDingux#3 (&sfp->sm_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
cleanup_module+0x2ae0/0x3120 [sfp]
sfp_register_bus+0x5c/0x9c
sfp_register_socket+0x48/0xd4
cleanup_module+0x271c/0x3120 [sfp]
platform_probe+0x64/0xb8
really_probe+0x17c/0x3c0
__driver_probe_device+0x78/0x164
driver_probe_device+0x3c/0xd4
__driver_attach+0xec/0x1f0
bus_for_each_dev+0x60/0xa0
driver_attach+0x20/0x28
bus_add_driver+0x108/0x208
driver_register+0x5c/0x118
__platform_driver_register+0x24/0x2c
init_module+0x28/0xa7c [sfp]
do_one_initcall+0x70/0x2ec
do_init_module+0x54/0x1e4
load_module+0x1b78/0x1c8c
__do_sys_init_module+0x1bc/0x2cc
__arm64_sys_init_module+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> OpenDingux#2 (rtnl_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
rtnl_lock+0x18/0x20
set_device_name+0x30/0x130
netdev_trig_activate+0x13c/0x1ac
led_trigger_set+0x118/0x234
led_trigger_write+0x104/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> OpenDingux#1 (&led_cdev->trigger_lock){++++}-{3:3}:
down_write+0x4c/0x13c
led_trigger_write+0xf8/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #0 (triggers_list_lock){++++}-{3:3}:
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sfp->sm_mutex);
lock(rtnl_mutex);
lock(&sfp->sm_mutex);
lock(triggers_list_lock);
*** DEADLOCK ***
4 locks held by kworker/u8:2/43:
#0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
OpenDingux#1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
OpenDingux#2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
OpenDingux#3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
dump_backtrace+0xa8/0x10c
show_stack+0x14/0x1c
dump_stack_lvl+0x5c/0xa0
dump_stack+0x14/0x1c
print_circular_bug+0x328/0x430
check_noncircular+0x124/0x134
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes: 01e5b72 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sydarn
pushed a commit
to sydarn/linux
that referenced
this pull request
Jan 29, 2024
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ torvalds#532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 OpenDingux#1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 OpenDingux#2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 OpenDingux#3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 OpenDingux#4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c OpenDingux#5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ torvalds#532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
sydarn
pushed a commit
to sydarn/linux
that referenced
this pull request
Jan 29, 2024
…kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for 6.7, part OpenDingux#2 - Ensure a vCPU's redistributor is unregistered from the MMIO bus if vCPU creation fails - Fix building KVM selftests for arm64 from the top-level Makefile
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
I forked your OpenDingux/linux repo and rebased these commits on your jz-5.1-retromini branch. Please consider this branch the most up-to-date location for now:
https://github.com/senquack/linux-1/commits/for-upstream-hugetlb-sq
I revised things a bit since we last spoke.. now huge pages are disallowed not only for EVA,XPA addressing, but also when proprietary Alchemy/Netlogic CPU extended addressing is in use.
I've left it up to you to decide to modify your arch/mips/config/ defconfig(s) to contain one or both of these options:
CONFIG_HUGETLBFS=y
CONFIG_TRANSPARENT_HUGEPAGE=y
I am working on libhugetlbfs right now, not sure how soon I'll be done though :(