The “NuISPTool APP” (Nuvoton In-System Programming tool APP) allows the embedded Flash memory to be reprogrammed under software control through the firmware using on-chip connectivity interface, such as UART and USB, without removing any microcontroller from the system. For NuMicro®
Family microcontroller (MCU) products, the on-chip Flash memory is partitioned into three blocks: APROM, Data Flash and LDROM. The APROM saves the user application program developed for a specific application; the Data Flash provides storage for nonvolatile application data; and the LDROM saves the ISP code for MCU to update its APROM/Data Flash/CONFIG.
User can update the MCU’s APROM, Data Flash, and User Configuration bits with Nuvoton standard ISP code programmed in LDROM easily by using the ISP function.
Download NuISPTool-Android
- Make sure the USB cable has USB OTG
- If you want to ues SPI/I2C/CAN/RS485 Interface in NuISPTool,need to use Nu-link2-pro
-
If you want to use Bluetooth Low Energy(BLE) function in NuISPTool.
- Need to use BLE transport module and connect on target board.
- Make sure the module’s UUID be as the same as follow.
- BLE service UUID 0xabf0
- BLE Characteristic UUID 0xABF1 (write)
- BLE Characteristic UUID 0xABF2 (notify)
-
If you want to use WiFi Interface in NuISPTool.
- Need to use Wifi transport module and connect UART on target board.
- Make sure the module’s TCP Server IP be as the same as follow.
- TCP://192.168.4.1:520
- Agree USB permission
- Click the
FIND DEVICE
link and find NuMaker - Click
OPEN
to enter NuISPTool home page
- Click
config bit
to enter settings - Modify the setting
- Execute and burn into the device
- Click
file icon
, and select the bin file you want to burn in. - Select the action and start buring