NuLinkFW revision history:
Nu-Link2-Me adds new USB PID to support for ISP-I2C. Be sure to install USB driver in the final step of the tool installation.
If you upgrade Nu-Link2 firmware from old version to later than v3.09.7380r.
- Be sure to install USB driver in the final step of the tool installation.
- If you are using Nu-Link2-Pro bridge function, see how to configure new defined BRIDGE_MODE on https://github.com/OpenNuvoton/Nuvoton_Tools
- If you are using Nu-Link2-Pro bridge, there is new USB PIDs for each bridge mode. please update your "NuMicro_ISP_Programming_Tool" later than v4.08 and "USB to Serial Port tool" later than v1.02.
USB to Serial Port Tool: https://www.nuvoton.com/tool-and-software/software-tool/general/nutool/
NuMicro_ISP_Programming_Tool: https://www.nuvoton.com/tool-and-software/software-tool/programmer-tool/
Or just patch new USB PID to your source code to recognize new defines https://github.com/OpenNuvoton/ISPTool/commit/b1d1894d31721d86a56b0c0927da71ebffc117e0
https://github.com/OpenNuvoton/NuTool-USB-to-Serial-Port/commit/9b2404b25f55e533dfb8b30377843b25f0da5a0b