Decode CTCSS tone not working on md-uv3x0

[Nimayer]

Tested on: Retevis RT3s

The CTCSS tone is set to D or E+D from the macro menu.
When transmitting with a second radio with the corresponding TX CTCSS tone (71.9 in my case) enabled,
no sound is heard on the receiving radio.

[Nimayer]

I have tested the latest master 156f31c on a Radioddity GD-77 and the CTCSS decoding works fine,
So the bug does not show on that radio.

[Tyler-2]

Confirmed bug on TYT MD UV-390 with nightly v0.3.2-82-g2bb05a2f also.

[kmihaylov]

Confirm on my RT3S, the same bild as @Tyler-2 . This file I downloaded today (11. Apr) from https://openrtx.schinken-radio.de/nightly/ and I expected a newer build.

=========

Just flashed with 5ffd6e5 (my Info says now v0.3.2-169)

The radio works in RX mode E+D with the desired tone freq!

========= Edit 2
OK, it seems that sometimes CTCSS D works, sometimes - not. I did a test w/ simplex operation. In repeater mode I see that the TX is CTCSS encoded because I can see the repeater answering.. When I use E+D the RX signal isn't played through the speaker so I guess there's something to be checked.

[silseva]

We'll fix it as soon as possible, thanks for reporting! :)

[silseva]

Finally solved.

[Tyler-2]

Are the TYT MD-UV390 builds not getting updated?

I just tried it on my lunch break with v0.3.2-82-g2bb05a2f freshly downloaded off Phil's nightly page and it seems like it's still not working.... and it turns out that's the same build as my original complaint!

[silseva]

I think is a problem with Phil's nightly builds system, I noticed the same.
We now have our nightly build server too, the firmware images can be found here: https://files.openrtx.org/nightly/.
Alternatively, you can flash the binaries from the latest release (v0.3.4), which can be found on the repository main page.