Cannot find endpoint map to instance for Command Class... while accessing Qubino ZMNHTDx device #1036

sbouchex · 2016-11-09T20:34:45Z

I'm using the a Qubino ZMNHTDx device and from the OpenZWave Control Panel log, I see a log of:

2016-11-09 15:31:36.288 Error, Node003, Cannot find endpoint map to instance for Command Class COMMAND_CLASS_METER endpoint 1
2016-11-09 15:31:37.305 Detail, Node003, Received: 0x01, 0x18, 0x00, 0x04, 0x00, 0x03, 0x12, 0x60, 0x0d, 0x01, 0x01, 0x32, 0x02, 0x41, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xca
2016-11-09 15:31:37.305 Detail,

I'm not able to receive METER notification or send switch command.

Fishwaldo · 2016-12-19T07:33:44Z

Need the full log file please (after removing zwcfg_.xml or ozwcache_.xml) and restarting

fbernard001 · 2017-05-05T12:20:11Z

Hello,
i have the same issue, how can i help in the resolution of this issue, how should i process to give you the requested logs ?

Netbulae · 2017-05-11T23:59:06Z

Try disabling the endpoint mapping in ZMNHTDx.xml




fbernard001 · 2017-05-12T10:02:24Z

Hello,
do i need to exclude and include again the device ? because tried just by changing the file and reboot system but nothing has changed

nechry · 2017-05-12T11:12:38Z

Yes you must exclude and include again to got changes. But I'm mostly sure this eill not fix your issues...

Netbulae · 2017-05-12T11:41:26Z

We've got the meter working with this config:

Netbulae@229175c

Don't know if this is required but we followed the following steps to update the config:

Update the xml
stop the service
remove the "zwcfg_*.xml" file
Start service again and exclude -> include

…4 to 6, assume new device as 4 to 6 Close issue #1036 Replace pull request #1219

nechry · 2017-05-12T12:26:35Z

please get latest version
stop the service
remove the "zwcfg_*.xml" file
and tell me if everything is fine

fbernard001 · 2017-05-12T13:47:57Z

Thanks all for your help,
ill try this when back home, one question: Removing this file will not make all my devices disappear ? because i have about 50 zwave devices and don't want to have to include them all again :)

nechry · 2017-05-12T14:08:03Z

in this case you can only exclude and include again.

nechry · 2017-05-18T07:18:27Z

shall I close this issue?

fbernard001 · 2017-05-18T08:06:17Z

Please not for now because the device is plugged between main power switch and the rest of my house and i need to find a suitable moment to shutdown everything and remove the device from the zwzve network. I have tried with everything online but can’t remove it ! Cordialement / Kind regards, Franck De : Jean-François Auger [mailto:notifications@github.com] Envoyé : jeudi 18 mai 2017 09:19 À : OpenZWave/open-zwave Cc : fbernard001; Comment Objet : Re: [OpenZWave/open-zwave] Cannot find endpoint map to instance for Command Class... while accessing Qubino ZMNHTDx device (#1036) shall I close this issue? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#1036 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AbH7eKS5ZKDs5I-LLd51kqXttHPe4Reoks5r6_DGgaJpZM4Kt9Tb> . <https://github.com/notifications/beacon/AbH7eC2xz9QHozJ6mJSGH1N-VylZjo3aks5r6_DGgaJpZM4Kt9Tb.gif> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Garanti sans virus. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com

nechry · 2017-05-18T08:11:00Z

Ok now rush, it's for my case following

Netbulae · 2017-05-18T08:32:56Z

Now we removed the endpoint mapping, but maybe we need to fix the association. I haven't figured out how to implement the tip below though. Can I do this in the xml itself?

https://www.domoticz.com/forum/viewtopic.php?t=11951#

Re: ZMNHBDx - meters and power don't match switches
Postby juankar » Monday 15 August 2016 1:03

The refresh solution works, but I think association is better
For my Qubino I have group 1 to node 1 (life line), don't change this... and the others groups are associated to node 1.1 (like an isntance of controler, node 1).
This works for me and I don't need any refresh in config file.

nechry · 2017-12-26T16:42:34Z

ping

Fishwaldo · 2018-10-26T09:46:39Z

Closing due to lack of feedback

Andor · 2020-07-30T20:18:31Z

Hello!
Very similar issue with the latest version of Home Assistant (0.113.2).
It founds only sensor.qubino_goap_zmnhxdx_3_phase_smart_meter_energy entity and I see errors like this when I press "refresh node":

2020-07-30 23:08:49.027 Detail, Node002,   Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x02, 0x02, 0x98, 0x40, 0xb5, 0x00, 0x9c
2020-07-30 23:08:49.027 Info, Node002, Received SecurityCmd_NonceGet from node 2
2020-07-30 23:08:49.027 Info, NONCES: 0x17, 0x67, 0x14, 0x5a, 0x31, 0xbf, 0x21, 0xee
2020-07-30 23:08:49.027 Info, NONCES: 0x07, 0x73, 0xd4, 0x7d, 0x1e, 0x7a, 0x4d, 0x85
2020-07-30 23:08:49.027 Info, NONCES: 0x2a, 0xc1, 0x33, 0x32, 0xd3, 0xbf, 0x53, 0x95
2020-07-30 23:08:49.028 Info, NONCES: 0x24, 0x4e, 0x4f, 0x6a, 0x84, 0x7b, 0x70, 0xb0
2020-07-30 23:08:49.028 Info, NONCES: 0xfd, 0xf7, 0xd7, 0x37, 0x89, 0xd4, 0x55, 0xab
2020-07-30 23:08:49.028 Info, NONCES: 0x93, 0x82, 0x06, 0xc1, 0x84, 0xca, 0x2d, 0xf5
2020-07-30 23:08:49.028 Info, NONCES: 0xd9, 0xe7, 0x08, 0x68, 0x9a, 0xc5, 0x04, 0x16
2020-07-30 23:08:49.028 Info, NONCES: 0xd4, 0x24, 0x47, 0x4c, 0x66, 0x6f, 0x25, 0x9b
2020-07-30 23:08:49.028 Info, Node002, Sending (Send) message (Callback ID=0x01, Expected Reply=0x00) - Nonce_Report - 0x01, 0x11, 0x00, 0x13, 0x02, 0x0a, 0x98, 0x80, 0x93, 0x82, 0x06, 0xc1, 0x84, 0xca, 0x2d, 0xf5, 0x05, 0x01, 0xa9:
2020-07-30 23:08:49.035 Detail,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2020-07-30 23:08:49.035 Detail,   ZW_SEND_DATA delivered to Z-Wave stack
2020-07-30 23:08:49.055 Detail,   Received: 0x01, 0x18, 0x00, 0x13, 0x01, 0x00, 0x00, 0x02, 0x00, 0xb3, 0x7f, 0x7f, 0x7f, 0x7f, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x45
2020-07-30 23:08:49.055 Detail,   ZW_SEND_DATA Request with callback ID 0x01 received (expected 0x01)
2020-07-30 23:08:49.268 Detail, Node002,   Received: 0x01, 0x2a, 0x00, 0x04, 0x00, 0x02, 0x22, 0x98, 0x81, 0x00, 0x82, 0x0f, 0xe0, 0x51, 0x87, 0x8c, 0x00, 0x05, 0x6d, 0xf7, 0x52, 0xa3, 0x80, 0x3a, 0x55, 0x99, 0xb4, 0xc8, 0x56, 0x0f, 0x89, 0xd1, 0x93, 0xc5, 0xee, 0x83, 0xa7, 0x10, 0x1e, 0xe3, 0x0a, 0xb5, 0x00, 0x74
2020-07-30 23:08:49.269 Info, Raw: 0x98, 0x81, 0x00, 0x82, 0x0f, 0xe0, 0x51, 0x87, 0x8c, 0x00, 0x05, 0x6d, 0xf7, 0x52, 0xa3, 0x80, 0x3a, 0x55, 0x99, 0xb4, 0xc8, 0x56, 0x0f, 0x89, 0xd1, 0x93, 0xc5, 0xee, 0x83, 0xa7, 0x10, 0x1e, 0xe3, 0x0a, 0xb5
2020-07-30 23:08:49.269 Detail, Node002, Decrypted Packet: 0x00, 0x60, 0x0d, 0x01, 0x01, 0x32, 0x02, 0x21, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
2020-07-30 23:08:49.269 Detail,
2020-07-30 23:08:49.269 Error, Node002, Cannot find endpoint map to instance for Command Class COMMAND_CLASS_METER endpoint 1
2020-07-30 23:08:49.831 Detail, Node002,   Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x02, 0x02, 0x98, 0x40, 0xb5, 0x00, 0x9c
2020-07-30 23:08:49.831 Info, Node002, Received SecurityCmd_NonceGet from node 2
2020-07-30 23:08:49.832 Info, NONCES: 0x17, 0x67, 0x14, 0x5a, 0x31, 0xbf, 0x21, 0xee
2020-07-30 23:08:49.832 Info, NONCES: 0x07, 0x73, 0xd4, 0x7d, 0x1e, 0x7a, 0x4d, 0x85
2020-07-30 23:08:49.832 Info, NONCES: 0x2a, 0xc1, 0x33, 0x32, 0xd3, 0xbf, 0x53, 0x95
2020-07-30 23:08:49.832 Info, NONCES: 0x24, 0x4e, 0x4f, 0x6a, 0x84, 0x7b, 0x70, 0xb0
2020-07-30 23:08:49.832 Info, NONCES: 0xfd, 0xf7, 0xd7, 0x37, 0x89, 0xd4, 0x55, 0xab
2020-07-30 23:08:49.832 Info, NONCES: 0x93, 0x82, 0x06, 0xc1, 0x84, 0xca, 0x2d, 0xf5
2020-07-30 23:08:49.832 Info, NONCES: 0xe6, 0x34, 0xf2, 0x65, 0x73, 0x19, 0xd1, 0xc4
2020-07-30 23:08:49.832 Info, NONCES: 0xd4, 0x24, 0x47, 0x4c, 0x66, 0x6f, 0x25, 0x9b
2020-07-30 23:08:49.832 Info, Node002, Sending (Send) message (Callback ID=0x01, Expected Reply=0x00) - Nonce_Report - 0x01, 0x11, 0x00, 0x13, 0x02, 0x0a, 0x98, 0x80, 0xe6, 0x34, 0xf2, 0x65, 0x73, 0x19, 0xd1, 0xc4, 0x05, 0x01, 0xd3:
2020-07-30 23:08:49.840 Detail,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2020-07-30 23:08:49.840 Detail,   ZW_SEND_DATA delivered to Z-Wave stack
2020-07-30 23:08:49.860 Detail,   Received: 0x01, 0x18, 0x00, 0x13, 0x01, 0x00, 0x00, 0x02, 0x00, 0xb5, 0x7f, 0x7f, 0x7f, 0x7f, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x43
2020-07-30 23:08:49.860 Detail,   ZW_SEND_DATA Request with callback ID 0x01 received (expected 0x01)
2020-07-30 23:08:49.888 Detail, Node002,   Received: 0x01, 0x2a, 0x00, 0x04, 0x00, 0x02, 0x22, 0x98, 0x81, 0x6b, 0xe2, 0x93, 0x63, 0x5d, 0x1e, 0x35, 0x12, 0x63, 0x06, 0xaa, 0xeb, 0xec, 0xb7, 0x3d, 0xa2, 0x3d, 0xe6, 0x29, 0x2f, 0xc3, 0x7e, 0xc8, 0xe6, 0x6b, 0x9a, 0xac, 0x1b, 0xf9, 0x24, 0x1e, 0x17, 0xb5, 0x00, 0x7c
2020-07-30 23:08:49.888 Info, Raw: 0x98, 0x81, 0x6b, 0xe2, 0x93, 0x63, 0x5d, 0x1e, 0x35, 0x12, 0x63, 0x06, 0xaa, 0xeb, 0xec, 0xb7, 0x3d, 0xa2, 0x3d, 0xe6, 0x29, 0x2f, 0xc3, 0x7e, 0xc8, 0xe6, 0x6b, 0x9a, 0xac, 0x1b, 0xf9, 0x24, 0x1e, 0x17, 0xb5
2020-07-30 23:08:49.888 Detail, Node002, Decrypted Packet: 0x00, 0x60, 0x0d, 0x02, 0x01, 0x32, 0x02, 0x21, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
2020-07-30 23:08:49.888 Detail,
2020-07-30 23:08:49.888 Error, Node002, Cannot find endpoint map to instance for Command Class COMMAND_CLASS_METER endpoint 2

flechaig · 2021-02-04T18:06:13Z

I solved the issue by refreshing the node.

Fishwaldo added the PendingFeedback label Dec 19, 2016

nechry added a commit that referenced this issue May 12, 2017

Add Qubino ZMNHTDx Smart meter Z-Wave+ config for version 1 to 3 and …

0cf4b75

…4 to 6, assume new device as 4 to 6 Close issue #1036 Replace pull request #1219

nechry added the ConfigUpdate label May 12, 2017

nechry self-assigned this May 12, 2017

Fishwaldo closed this as completed Oct 26, 2018

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Cannot find endpoint map to instance for Command Class... while accessing Qubino ZMNHTDx device #1036

Cannot find endpoint map to instance for Command Class... while accessing Qubino ZMNHTDx device #1036

sbouchex commented Nov 9, 2016

Fishwaldo commented Dec 19, 2016

fbernard001 commented May 5, 2017

Netbulae commented May 11, 2017

fbernard001 commented May 12, 2017 •

edited

Loading

nechry commented May 12, 2017

Netbulae commented May 12, 2017

nechry commented May 12, 2017

fbernard001 commented May 12, 2017

nechry commented May 12, 2017

nechry commented May 18, 2017

fbernard001 commented May 18, 2017 via email

nechry commented May 18, 2017

Netbulae commented May 18, 2017

nechry commented Dec 26, 2017

Fishwaldo commented Oct 26, 2018

Andor commented Jul 30, 2020

flechaig commented Feb 4, 2021

Cannot find endpoint map to instance for Command Class... while accessing Qubino ZMNHTDx device #1036

Cannot find endpoint map to instance for Command Class... while accessing Qubino ZMNHTDx device #1036

Comments

sbouchex commented Nov 9, 2016

Fishwaldo commented Dec 19, 2016

fbernard001 commented May 5, 2017

Netbulae commented May 11, 2017

fbernard001 commented May 12, 2017 • edited Loading

nechry commented May 12, 2017

Netbulae commented May 12, 2017

nechry commented May 12, 2017

fbernard001 commented May 12, 2017

nechry commented May 12, 2017

nechry commented May 18, 2017

fbernard001 commented May 18, 2017 via email

nechry commented May 18, 2017

Netbulae commented May 18, 2017

nechry commented Dec 26, 2017

Fishwaldo commented Oct 26, 2018

Andor commented Jul 30, 2020

flechaig commented Feb 4, 2021

fbernard001 commented May 12, 2017 •

edited

Loading