Client stuff format and typos

source/main/OwlHClient.rst

@@ -25,7 +25,7 @@ configuration is in the same folder as well as logs will be store in this folder
 configuration file conf.json looks like this: 
 
 ::
-    
+
     {
         "collectorIP":"10.13.1.13",
         "collectorPort":"50010",
@@ -40,19 +40,13 @@ configuration file conf.json looks like this:
 
 Be sure to update the parameters properly. 
 
-Collector IP - is you OwlH Node or OwlH Master IP that is running the STAP socket-to-network service
-Collector Port - is the port on OwlH StAP service side 
-
-Cert - is deployed and build with the sh script when installing client. feel free to change as needed. 
-
-BPF - Please, take care here. as you are forwarding traffic from a host to a different one, you can create a loop or kill your network if forwarding is not right filtered. minimum filtering must include STAP service ports like in the picture
-
-Include Interfaces - This parameter allows you to define which interfaces client must listen to. current configuration will manage enX (en0, en1, en2 etc) as well as ethX (eth0, eth1, eth2 etc). A log file for each interface will be created. 
-
-Exclude Interfaces - lets suppose you don't want to listen to en1 as per our previous sample, then you can include here en1 as an interface to exclude. 
-
-Include Nets - You will also able to filter what interfaces to listen by identifying with ip and network has the interface defined. 0.0.0.0/0 means that any ip is allowed. 
-
-Exclude IPs - again you can stop collecting from interfaces that will include the excluded ip. 
 
-Wait Time - Time between checks in minutes. if you do a configuration change, Client will restart as needed with the new configuration. If client went down or connection is lost because OwlH Stap service is done for a while, Client will try to reconnect each 'wait time'
+* **Collector IP** - is you OwlH Node or OwlH Master IP that is running the STAP socket-to-network service
+* **Collector Port** - is the port on OwlH StAP service side 
+* **Cert** - is deployed and build with the sh script when installing client. feel free to change as needed. 
+* **BPF** - Please, take care here. as you are forwarding traffic from a host to a different one, you can create a loop or kill your network if forwarding is not right filtered. minimum filtering must include STAP service ports like in the picture
+* **Include Interfaces** - This parameter allows you to define which interfaces client must listen to. current configuration will manage enX (en0, en1, en2 etc) as well as ethX (eth0, eth1, eth2 etc). A log file for each interface will be created. 
+* **Exclude Interfaces** - lets suppose you don't want to listen to en1 as per our previous sample, then you can include here en1 as an interface to exclude. 
+* **Include Nets** - You will also able to filter what interfaces to listen by identifying with ip and network has the interface defined. 0.0.0.0/0 means that any ip is allowed. 
+* **Exclude IPs** - again you can stop collecting from interfaces that will include the excluded ip. 
+* **Wait Time** - Time between checks in minutes. if you do a configuration change, Client will restart as needed with the new configuration. If client went down or connection is lost because OwlH Stap service is done for a while, Client will try to reconnect each 'wait time'