vehicle_command.msg: add PREFLIGHT_CALIBRATION_TEMPERATURE_CALIBRATION

msg/vehicle_command.msg

@@ -49,7 +49,8 @@ uint32 VEHICLE_CMD_DO_MOUNT_CONTROL_QUAT=220		# Mission command to control a cam
 uint32 VEHICLE_CMD_DO_GUIDED_MASTER=221			# set id of master controller |System ID| Component ID| Empty| Empty| Empty| Empty| Empty|
 uint32 VEHICLE_CMD_DO_GUIDED_LIMITS=222			# set limits for external control |timeout - maximum time (in seconds) that external controller will be allowed to control vehicle. 0 means no timeout| absolute altitude min (in meters, AMSL) - if vehicle moves below this alt, the command will be aborted and the mission will continue.  0 means no lower altitude limit| absolute altitude max (in meters)- if vehicle moves above this alt, the command will be aborted and the mission will continue.  0 means no upper altitude limit| horizontal move limit (in meters, AMSL) - if vehicle moves more than this distance from it's location at the moment the command was executed, the command will be aborted and the mission will continue. 0 means no horizontal altitude limit| Empty| Empty| Empty|
 uint32 VEHICLE_CMD_DO_LAST = 240			# NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty|
-uint32 VEHICLE_CMD_PREFLIGHT_CALIBRATION = 241		# Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Empty| Empty|
+uint32 VEHICLE_CMD_PREFLIGHT_CALIBRATION = 241		# Trigger calibration. This command will be only accepted if in pre-flight mode. See mavlink spec MAV_CMD_PREFLIGHT_CALIBRATION
+uint32 PREFLIGHT_CALIBRATION_TEMPERATURE_CALIBRATION = 3		# param value for VEHICLE_CMD_PREFLIGHT_CALIBRATION to start temperature calibration
 uint32 VEHICLE_CMD_PREFLIGHT_SET_SENSOR_OFFSETS = 242	# Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units|
 uint32 VEHICLE_CMD_PREFLIGHT_STORAGE = 245		# Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Reserved| Reserved| Empty| Empty| Empty|
 uint32 VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN = 246	# Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer.| Reserved| Reserved| Empty| Empty| Empty|