A 3D printed, low profile plateless case for the PRKL30 keyboard
This won't work with wireless versions as you need to cut off the part of the pcb with the battery connections to fit in the case.
- 14x m2x4mm screws
- 7x m2x8mm round threaded standoffs
- 4x 8mm rubber bumpons (optional). (Pictures show an older revision with foam feet)
- Drill with 2mm bit to drill through sacrificial layers on mounting holes.
- You need to cut off the part of the pcb that sticks out with "SW2" printed next to it, it's only needed for wireless builds. I've put a picture of the part in the images folder:
/_Images/pcb.png
- The mounting holes are "closed" to print without supports, you'll need to drill through the sacrificial layers from the top with a 2mm bit.
- You'll need to print the split files with "Split-L/R" suffix if your printer bed is smaller than about 250x250mm.
- Designers of PRKL30 Keyboard for making the project and keeping it open source.
- FMKC Community for being awesome.
- Erkhal for making the model this case is based on.
Licenced under The TAPR Open Hardware License