Revert "Pin qiskit==0.32.0 temporarily (dev) (#404)"
#406
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
rmoyard
approved these changes
Dec 10, 2021
josh146
added a commit
that referenced
this pull request
May 10, 2022
* Update `tutorial_noisy_circuits.py` (#312) * Update tutorial_noisy_circuits.py * remove dimensionality of ev * increment cache number * @master for pl (#319) * Update requirements.txt Co-authored-by: antalszava <antalszava@gmail.com> * Update requirements.txt Co-authored-by: antalszava <antalszava@gmail.com> * update requirements * Update requirements.txt (#329) * Add more `plt.show` calls in the l2l demo (#331) * plt.show; last updated * Model name * diff_method=None (#332) * Added a note to Quantum Volume Demo (#335) * Added a note to teach users how to access a list of available IBM Q backends * Having two notes next to eachother looks visually bad so I just merged it with the previous note * Update requirements.txt Co-authored-by: antalszava <antalszava@gmail.com> * Update requirements.txt Co-authored-by: antalszava <antalszava@gmail.com> * Add dev branch * Update demos to make use of the new qml.sample and qml.expval(H) functionality (story #: 8118) (#330) * Updated qsim to use the new qml.sample functionality **needs to be tested ! ** * just removed one commented line * Updated one of the paragraphs to be consistent with the changes * Updated coherent vqls to use the builtin functionality of qml.sample, also tested it locally and it seems to run without errors! * updated qaoa_maxcut to use new qml.sample functionality * updated vqls tutorial to make use of the new functionality of qml.sample * Made some changes to chem reaction tutorial, want to confirm with CI to see if it works properly because I can't run it locally * fixed quick little bug with wires in circuit def * quick change to help debug error in CI * Found the bug with chem_reactions tutorial, hopefully this fixes it * updated falqon tutorial and removed dependance on qml.ExpvalCost, still need to confirm it works with CI * fixed a small bug, wrote Qnode isntead of QNode * Updated falqon to use qml.expval instead of qml.ExpvalCost * updated optimized measurement tutorial to make use of qml.expval, still need to test with CI * debugging measurement optimize tutorial * The bug regarding Qnodes is well known, just made a change the Christina suggested as a temporary fix * Updated molecular geometry optimization tutorial to make use of qml.expval * Updated qaoa tutorial to make use of qml.expval, updated docs in both examples to remove qml.ExpValCost * Updated vqe and vqe qng tutorials to use qml.expval(H) * Updated the vqe soin sectors demo with qml.expval, fixed a typo in overview of vqe tutorial * Updated parallel vqe tutorial to remove dependance on qml.ExpvalCost, was not able to fully test this because I don't have rigitti setup * Updated these tutorials to remove qml.ExpvalCost dependance * Cleaning up some typos and comments * Updated measurement optimization tutorial to make use of qml.Tracker * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: antalszava <antalszava@gmail.com> * Updated tutorials based on pr comments * Fixed bug in the spsa demo * clean up * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * cleaned up docs * Cleaning up documentation * added comment * Update demonstrations/braket-parallel-gradients.py Co-authored-by: antalszava <antalszava@gmail.com> * Clean up - added variable num_wires to mol_geo_opt tutorial - replaced new_graph.nodes with dev.wires to clairfy iteration over wires * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_qaoa_intro.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqe_qng.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Address comments - made circuit a qnode to prevent the need to initialize multiple qnodes one after another Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> * Update tutorial_gbs.py (#351) * pin pyparsing (#358) * Merge `master` into `dev` (#362) * Update pyscf version. (#273) Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> * Update qnode.draw to qml.draw() (#352) * pin pyparsing (#357) * replaced pad --> pad_with in this tutorial as it has now been deprecated (#359) * Add an action for demo output checking (#356) * Update demos to make use of the new qml.sample and qml.expval(H) functionality (story #: 8118) (#330) * Updated qsim to use the new qml.sample functionality **needs to be tested ! ** * just removed one commented line * Updated one of the paragraphs to be consistent with the changes * Updated coherent vqls to use the builtin functionality of qml.sample, also tested it locally and it seems to run without errors! * updated qaoa_maxcut to use new qml.sample functionality * updated vqls tutorial to make use of the new functionality of qml.sample * Made some changes to chem reaction tutorial, want to confirm with CI to see if it works properly because I can't run it locally * fixed quick little bug with wires in circuit def * quick change to help debug error in CI * Found the bug with chem_reactions tutorial, hopefully this fixes it * updated falqon tutorial and removed dependance on qml.ExpvalCost, still need to confirm it works with CI * fixed a small bug, wrote Qnode isntead of QNode * Updated falqon to use qml.expval instead of qml.ExpvalCost * updated optimized measurement tutorial to make use of qml.expval, still need to test with CI * debugging measurement optimize tutorial * The bug regarding Qnodes is well known, just made a change the Christina suggested as a temporary fix * Updated molecular geometry optimization tutorial to make use of qml.expval * Updated qaoa tutorial to make use of qml.expval, updated docs in both examples to remove qml.ExpValCost * Updated vqe and vqe qng tutorials to use qml.expval(H) * Updated the vqe soin sectors demo with qml.expval, fixed a typo in overview of vqe tutorial * Updated parallel vqe tutorial to remove dependance on qml.ExpvalCost, was not able to fully test this because I don't have rigitti setup * Updated these tutorials to remove qml.ExpvalCost dependance * Cleaning up some typos and comments * Updated measurement optimization tutorial to make use of qml.Tracker * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: antalszava <antalszava@gmail.com> * Updated tutorials based on pr comments * Fixed bug in the spsa demo * clean up * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * cleaned up docs * Cleaning up documentation * added comment * Update demonstrations/braket-parallel-gradients.py Co-authored-by: antalszava <antalszava@gmail.com> * Clean up - added variable num_wires to mol_geo_opt tutorial - replaced new_graph.nodes with dev.wires to clairfy iteration over wires * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_qaoa_intro.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqe_qng.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Address comments - made circuit a qnode to prevent the need to initialize multiple qnodes one after another Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> * sources + yml * add diff job * on push * branch name * unzip with path * updates * tutorials from master and dev too * path to script * Update diffs found * add toc and references * Update diffs found * comments * mv to .github/workflows dedicated folder * diffs document updates * revert changes to tutorial_vqe_qng.py * Update .github/workflows/html_parser.py Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * suggestions * no sys * Move demo_diff.md so that workflows access is not required * change trigger and branch Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: QML demo checker Bot <> Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update templates access and remove template decorator (#360) * Update pyscf version. (#273) Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> * Update qnode.draw to qml.draw() (#352) * pin pyparsing (#357) * replaced pad --> pad_with in this tutorial as it has now been deprecated (#359) * Update templates. Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * Remove use of the init module everywhere (#361) * Update pyscf version. (#273) Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> * Update qnode.draw to qml.draw() (#352) * pin pyparsing (#357) * replaced pad --> pad_with in this tutorial as it has now been deprecated (#359) * Add an action for demo output checking (#356) * Update demos to make use of the new qml.sample and qml.expval(H) functionality (story #: 8118) (#330) * Updated qsim to use the new qml.sample functionality **needs to be tested ! ** * just removed one commented line * Updated one of the paragraphs to be consistent with the changes * Updated coherent vqls to use the builtin functionality of qml.sample, also tested it locally and it seems to run without errors! * updated qaoa_maxcut to use new qml.sample functionality * updated vqls tutorial to make use of the new functionality of qml.sample * Made some changes to chem reaction tutorial, want to confirm with CI to see if it works properly because I can't run it locally * fixed quick little bug with wires in circuit def * quick change to help debug error in CI * Found the bug with chem_reactions tutorial, hopefully this fixes it * updated falqon tutorial and removed dependance on qml.ExpvalCost, still need to confirm it works with CI * fixed a small bug, wrote Qnode isntead of QNode * Updated falqon to use qml.expval instead of qml.ExpvalCost * updated optimized measurement tutorial to make use of qml.expval, still need to test with CI * debugging measurement optimize tutorial * The bug regarding Qnodes is well known, just made a change the Christina suggested as a temporary fix * Updated molecular geometry optimization tutorial to make use of qml.expval * Updated qaoa tutorial to make use of qml.expval, updated docs in both examples to remove qml.ExpValCost * Updated vqe and vqe qng tutorials to use qml.expval(H) * Updated the vqe soin sectors demo with qml.expval, fixed a typo in overview of vqe tutorial * Updated parallel vqe tutorial to remove dependance on qml.ExpvalCost, was not able to fully test this because I don't have rigitti setup * Updated these tutorials to remove qml.ExpvalCost dependance * Cleaning up some typos and comments * Updated measurement optimization tutorial to make use of qml.Tracker * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: antalszava <antalszava@gmail.com> * Updated tutorials based on pr comments * Fixed bug in the spsa demo * clean up * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * cleaned up docs * Cleaning up documentation * added comment * Update demonstrations/braket-parallel-gradients.py Co-authored-by: antalszava <antalszava@gmail.com> * Clean up - added variable num_wires to mol_geo_opt tutorial - replaced new_graph.nodes with dev.wires to clairfy iteration over wires * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_qaoa_intro.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqe_qng.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Address comments - made circuit a qnode to prevent the need to initialize multiple qnodes one after another Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> * sources + yml * add diff job * on push * branch name * unzip with path * updates * tutorials from master and dev too * path to script * Update diffs found * add toc and references * Update diffs found * comments * mv to .github/workflows dedicated folder * diffs document updates * revert changes to tutorial_vqe_qng.py * Update .github/workflows/html_parser.py Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * suggestions * no sys * Move demo_diff.md so that workflows access is not required * change trigger and branch Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: QML demo checker Bot <> * remove init module everywhere * minor improvement * add 2pi scaling * Update demonstrations/spsa.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_doubly_stochastic.py Co-authored-by: antalszava <antalszava@gmail.com> * add low and high; scale argument * add low and high; scale argument * use pad_with Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * Requires grad updates (#364) * chemical * tutorial_mol_geo_opt * tutorial_vqe_spin_sectors * vqe; remove - option due to redundancy warning * rotoselect * natural grad demo * qgrnn * local cost func demo, requires_grad=True * format * gaussian transformation * qaoa intro * adaptive * variational classifier * Update demonstrations/tutorial_local_cost_functions.py Co-authored-by: Christina Lee <christina@xanadu.ai> * update with assignment * suggestion + requires_grad specify * qonn.py Co-authored-by: Christina Lee <christina@xanadu.ai> * requires_grad=True (#366) * use approx='block-diag' instead of diag_approx=False (#365) Co-authored-by: Josh Izaac <josh146@gmail.com> * increase the number of epochs (#368) * last bit of requires_grad=True changes (#370) Co-authored-by: Christina Lee <christina@xanadu.ai> * Prepare `dev` to be merged into `master` (#373) * Update pyscf version. (#273) Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> * Update qnode.draw to qml.draw() (#352) * pin pyparsing (#357) * replaced pad --> pad_with in this tutorial as it has now been deprecated (#359) * Add an action for demo output checking (#356) * Update demos to make use of the new qml.sample and qml.expval(H) functionality (story #: 8118) (#330) * Updated qsim to use the new qml.sample functionality **needs to be tested ! ** * just removed one commented line * Updated one of the paragraphs to be consistent with the changes * Updated coherent vqls to use the builtin functionality of qml.sample, also tested it locally and it seems to run without errors! * updated qaoa_maxcut to use new qml.sample functionality * updated vqls tutorial to make use of the new functionality of qml.sample * Made some changes to chem reaction tutorial, want to confirm with CI to see if it works properly because I can't run it locally * fixed quick little bug with wires in circuit def * quick change to help debug error in CI * Found the bug with chem_reactions tutorial, hopefully this fixes it * updated falqon tutorial and removed dependance on qml.ExpvalCost, still need to confirm it works with CI * fixed a small bug, wrote Qnode isntead of QNode * Updated falqon to use qml.expval instead of qml.ExpvalCost * updated optimized measurement tutorial to make use of qml.expval, still need to test with CI * debugging measurement optimize tutorial * The bug regarding Qnodes is well known, just made a change the Christina suggested as a temporary fix * Updated molecular geometry optimization tutorial to make use of qml.expval * Updated qaoa tutorial to make use of qml.expval, updated docs in both examples to remove qml.ExpValCost * Updated vqe and vqe qng tutorials to use qml.expval(H) * Updated the vqe soin sectors demo with qml.expval, fixed a typo in overview of vqe tutorial * Updated parallel vqe tutorial to remove dependance on qml.ExpvalCost, was not able to fully test this because I don't have rigitti setup * Updated these tutorials to remove qml.ExpvalCost dependance * Cleaning up some typos and comments * Updated measurement optimization tutorial to make use of qml.Tracker * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: antalszava <antalszava@gmail.com> * Updated tutorials based on pr comments * Fixed bug in the spsa demo * clean up * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * cleaned up docs * Cleaning up documentation * added comment * Update demonstrations/braket-parallel-gradients.py Co-authored-by: antalszava <antalszava@gmail.com> * Clean up - added variable num_wires to mol_geo_opt tutorial - replaced new_graph.nodes with dev.wires to clairfy iteration over wires * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_qaoa_intro.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqe_qng.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Address comments - made circuit a qnode to prevent the need to initialize multiple qnodes one after another Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> * sources + yml * add diff job * on push * branch name * unzip with path * updates * tutorials from master and dev too * path to script * Update diffs found * add toc and references * Update diffs found * comments * mv to .github/workflows dedicated folder * diffs document updates * revert changes to tutorial_vqe_qng.py * Update .github/workflows/html_parser.py Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * suggestions * no sys * Move demo_diff.md so that workflows access is not required * change trigger and branch Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: QML demo checker Bot <> * Update header.html * Update xanadu.css_t * Update demo checker path (#363) * remove unnecessary steps (display files); update the path where the markdown file is being stored * temporarily add workflow execution when pushing to branch * Update to a non-protected branch * comment * torch and tensorflow requirement bumps * get numpy required by TF 2.6 * remove push trigger * keras 2.6 (#369) * Added tkt tutorial (#371) * Added tkt tutorial * Updated tkt tutorial * Changed tutorial_tkt and built locally * Apply suggestions from code review * Delete junit.xml Co-authored-by: Catalina Albornoz <catalina@xanadu.ai> Co-authored-by: Nathan Killoran <co9olguy@users.noreply.github.com> * Updating demos to be consistent with the new breaking changes. (#367) * Updating demos to be consistent with the new breaking changes. - Updated link in pytorch noise - Removed .template when calling templates - Need to update IBMQ decice * more fixed then before but still getting some weird seg-faults * updated the use of tape.execute --> qml.execute * Qubit Unitary got a decomposition, had to stop expanding the quantum tape at the operator to match the ascii art display Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_multiclass_classification.py Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: CatalinaAlbornoz <albornoz.catalina@hotmail.com> Co-authored-by: Catalina Albornoz <catalina@xanadu.ai> Co-authored-by: Nathan Killoran <co9olguy@users.noreply.github.com> * update requirements * Increase cache (`dev`) (#385) * JAX new version changes required * Revert "JAX new version changes required" This reverts commit 7b514ac. * no jit (temp) * get the norm check updated branch * dummy change to run the demo * increase the cache number * get v0.19.1-rc0 branch * Update demonstrations/tutorial_general_parshift.py * increase the cache and continue pulling PennyLane master * Stop importing QNode from beta folder in mitigation demo (#392) * Update the backprop demo to work with the latest PL master (#391) * Fix jax demo to work with the latest version of PennyLane (#393) * Fixes the JAX demo * fix * `dev` branch fixes (#396) * fix tutorial_classical_shadows.py * pin to latest lightning * get cmake * update * change order of installs * pip install cmake * gcc8 image * newer circleci image * spectrum -> qnode_spectrum (#397) * add introduction and imports * add first code examples * add overlap and cqe code example * use plt.show for the general parameter shift demo (#400) * Fix demo diffs with PennyLane release v0.20.0 (#402) * Fix metrix_tensor warning about approximation * set the expansion strategy for the metrology demo * Add max_diff to quantum analytic descent Co-authored-by: antalszava <antalszava@gmail.com> * use draw_mpl method and set device expansion (#398) * use draw_mpl * qonn uses draw transform rather than method * Update demonstrations/qonn.py Co-authored-by: antalszava <antalszava@gmail.com> * plt.show * Add `expansion_strategy="device"` ... to printed circuits with templates. * Update demonstrations/tutorial_local_cost_functions.py * Update demonstrations/tutorial_local_cost_functions.py * Update demonstrations/tutorial_local_cost_functions.py * print after plt.show Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: dime10 <dime10@users.noreply.github.com> * Pin qiskit==0.32.0 temporarily (`dev`) (#404) * pin Qiskit and dummy modify the demos where the change should occur * change the order of statements to trigger the docs build * Revert "Pin qiskit==0.32.0 temporarily (`dev`) (#404)" (#406) This reverts commit cabe82a. * qhack * update SF dependency * fix * fix * fix * fix * Make demos using Forest non-automatically run (#408) * rename demos that would use Forest such that they are not automatically run; remove the Forest dep * no quilc or qvm run * Add outputs with images to ensemble multi qpu demo * vqe parallel outputs * more width * path and width fix * last updated; correct png * image * Update requirements.txt * Update requirements * add ploting code * correct spelling and typos * add full optimization code example * add orbital figure * modify plots * refine text add ref * add description to rts * Update config.yml * Update config.yml * Update config.yml * apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * apply review comments * correct typos * modify introduction * modify introduction * update thumbnail image * update equation * modify introduction * restore config file * add review comments * add review comments * add review comments * modify print option * modify overlap int * apply suggestions from code review Co-authored-by: CatalinaAlbornoz <albornoz.catalina@hotmail.com> * apply review comments * remove blanck line * apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * add review comments * cite whitepaper in intro * Specify `diff_method=None` in `tutorial_jax_transformations.py` (#418) * Re-add diff_method=None to jax transform PR * increase no output timeout time * Python unbeffered * revert 30m * change to using a machine instance * increment the cache * Revert "increment the cache" This reverts commit 74f8a32. * Revert "change to using a machine instance" This reverts commit f22a6d2. * temporarily get release Lightning * no python buffer export * Update requirements.txt * Update requirements.txt * update requirements * pin markupsafe==2.0.1 (#433) * Updated demo to avoid the soon to be deprecated qml.finite_diff func (#431) Co-authored-by: antalszava <antalszava@gmail.com> * Change querying matrices as per the new API (#437) * obtaining matrix * inc cache number * update circuit drawing (#438) * Update tutorial_vqt.py (#440) * Use `cirq_pasqal` (#443) * cirq_pasqal * inc cache num * bump: TF, Keras, NumPy and Mitiq * NumPy * torch no_grad used with plotting * Qiskit Aer NoiseModel will be updating the .from_backend() method to take backend objects directly (#444) * Update quantum volume Demo with instructions to configure IBM Q account (#445) * Qiskit Aer NoiseModel will be updating the .from_backend() method to take backend objects directly * added note about how to setup IBM Q account * fix note display in docs * more formating * fix link * formatting again * Update demonstrations/quantum_volume.py Co-authored-by: David Ittah <dime10@users.noreply.github.com> * Update demonstrations/quantum_volume.py Co-authored-by: David Ittah <dime10@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: antalszava <antalszava@gmail.com> * Update requirements * update SF version * Update (#465) * Update `requirements.txt` (#466) * update requirements.txt * No qchem needed * Update quantum volume demonstration as per drawing updates (#471) * Add the show matrices option * Update demonstrations/quantum_volume.py Co-authored-by: Christina Lee <chrissie.c.l@gmail.com> Co-authored-by: Christina Lee <chrissie.c.l@gmail.com> * Update spsa (#464) * Update * Update demonstrations/spsa.py Co-authored-by: antalszava <antalszava@gmail.com> * Fix QChem related demo errors, get latest Lightning & pin Cirq (#467) * install Lightning in the runner using Test PyPi * try installing PennyLane rc * pin openfermionpyscf and comment * Pull Lightning from Test PyPi * Measurement optimize adjust * cache * h5py version pin * req file * pin Cirq-core and cirq-pasqal * revert method='pyscf' in adaptive demo * Trigger CI * reset cache * no comma needed * change hf to qchem * set requires_grad as false for hamiltonian coeffs (#473) * use molecular_hamiltonian * modify format * Remove QChem in the text (#474) * Update mitiq demo drawing (#476) * draw tape with new pipeline * length * stable -> latest (#477) * Apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * rearrange intro * add more links * Update dependencies in quantum chemistry tutorial (#475) * Apply suggestions from code review Co-authored-by: antalszava <antalszava@gmail.com> * resource class & parallel * no parallel * increment requirements * Apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * correct links * update date and remove commas * modify format * add introduction and imports * add first code examples * add overlap and cqe code example * add ploting code * correct spelling and typos * add full optimization code example * add orbital figure * modify plots * refine text add ref * add description to rts * Update config.yml * Update config.yml * Update config.yml * apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * apply review comments * correct typos * modify introduction * modify introduction * update thumbnail image * update equation * modify introduction * restore config file * add review comments * add review comments * add review comments * modify print option * modify overlap int * apply suggestions from code review Co-authored-by: CatalinaAlbornoz <albornoz.catalina@hotmail.com> * apply review comments * remove blanck line * apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * add review comments * cite whitepaper in intro * change hf to qchem * use molecular_hamiltonian * modify format * Apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * rearrange intro * add more links * Apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * correct links * update date and remove commas * modify format * update requirements * remove extra change in requirements * Create Soran.png * Update date on demonstrations/tutorial_differentiable_HF.py * Update automatic diff link on demonstrations/tutorial_differentiable_HF.py * Update text on demonstrations/tutorial_differentiable_HF.py * Update text on demonstrations/tutorial_differentiable_HF.py * Update text on demonstrations/tutorial_differentiable_HF.py * Add bio to demonstrations/tutorial_differentiable_HF.py * Update demonstrations/tutorial_differentiable_HF.py * Add author name on demonstrations/tutorial_differentiable_HF.py * Update demonstrations/tutorial_differentiable_HF.py * Update bio on demonstrations/tutorial_differentiable_HF.py * Add "About the author" section title to demonstrations/tutorial_differentiable_HF.py Co-authored-by: GitHub Nightly Merge Action <actions@github.com> Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Romain <rmoyard@gmail.com> Co-authored-by: Christina Lee <christina@xanadu.ai> Co-authored-by: CatalinaAlbornoz <albornoz.catalina@hotmail.com> Co-authored-by: Catalina Albornoz <catalina@xanadu.ai> Co-authored-by: Nathan Killoran <co9olguy@users.noreply.github.com> Co-authored-by: Tom Bromley <49409390+trbromley@users.noreply.github.com> Co-authored-by: David Ittah <dime10@users.noreply.github.com> Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> Co-authored-by: Christina Lee <chrissie.c.l@gmail.com>
CatalinaAlbornoz
added a commit
that referenced
this pull request
May 16, 2022
* update requirements * Update requirements.txt (#329) * Add more `plt.show` calls in the l2l demo (#331) * plt.show; last updated * Model name * diff_method=None (#332) * Added a note to Quantum Volume Demo (#335) * Added a note to teach users how to access a list of available IBM Q backends * Having two notes next to eachother looks visually bad so I just merged it with the previous note * Update requirements.txt Co-authored-by: antalszava <antalszava@gmail.com> * Update requirements.txt Co-authored-by: antalszava <antalszava@gmail.com> * Add dev branch * Update demos to make use of the new qml.sample and qml.expval(H) functionality (story #: 8118) (#330) * Updated qsim to use the new qml.sample functionality **needs to be tested ! ** * just removed one commented line * Updated one of the paragraphs to be consistent with the changes * Updated coherent vqls to use the builtin functionality of qml.sample, also tested it locally and it seems to run without errors! * updated qaoa_maxcut to use new qml.sample functionality * updated vqls tutorial to make use of the new functionality of qml.sample * Made some changes to chem reaction tutorial, want to confirm with CI to see if it works properly because I can't run it locally * fixed quick little bug with wires in circuit def * quick change to help debug error in CI * Found the bug with chem_reactions tutorial, hopefully this fixes it * updated falqon tutorial and removed dependance on qml.ExpvalCost, still need to confirm it works with CI * fixed a small bug, wrote Qnode isntead of QNode * Updated falqon to use qml.expval instead of qml.ExpvalCost * updated optimized measurement tutorial to make use of qml.expval, still need to test with CI * debugging measurement optimize tutorial * The bug regarding Qnodes is well known, just made a change the Christina suggested as a temporary fix * Updated molecular geometry optimization tutorial to make use of qml.expval * Updated qaoa tutorial to make use of qml.expval, updated docs in both examples to remove qml.ExpValCost * Updated vqe and vqe qng tutorials to use qml.expval(H) * Updated the vqe soin sectors demo with qml.expval, fixed a typo in overview of vqe tutorial * Updated parallel vqe tutorial to remove dependance on qml.ExpvalCost, was not able to fully test this because I don't have rigitti setup * Updated these tutorials to remove qml.ExpvalCost dependance * Cleaning up some typos and comments * Updated measurement optimization tutorial to make use of qml.Tracker * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: antalszava <antalszava@gmail.com> * Updated tutorials based on pr comments * Fixed bug in the spsa demo * clean up * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * cleaned up docs * Cleaning up documentation * added comment * Update demonstrations/braket-parallel-gradients.py Co-authored-by: antalszava <antalszava@gmail.com> * Clean up - added variable num_wires to mol_geo_opt tutorial - replaced new_graph.nodes with dev.wires to clairfy iteration over wires * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_qaoa_intro.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqe_qng.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Address comments - made circuit a qnode to prevent the need to initialize multiple qnodes one after another Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> * Update tutorial_gbs.py (#351) * pin pyparsing (#358) * Merge `master` into `dev` (#362) * Update pyscf version. (#273) Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> * Update qnode.draw to qml.draw() (#352) * pin pyparsing (#357) * replaced pad --> pad_with in this tutorial as it has now been deprecated (#359) * Add an action for demo output checking (#356) * Update demos to make use of the new qml.sample and qml.expval(H) functionality (story #: 8118) (#330) * Updated qsim to use the new qml.sample functionality **needs to be tested ! ** * just removed one commented line * Updated one of the paragraphs to be consistent with the changes * Updated coherent vqls to use the builtin functionality of qml.sample, also tested it locally and it seems to run without errors! * updated qaoa_maxcut to use new qml.sample functionality * updated vqls tutorial to make use of the new functionality of qml.sample * Made some changes to chem reaction tutorial, want to confirm with CI to see if it works properly because I can't run it locally * fixed quick little bug with wires in circuit def * quick change to help debug error in CI * Found the bug with chem_reactions tutorial, hopefully this fixes it * updated falqon tutorial and removed dependance on qml.ExpvalCost, still need to confirm it works with CI * fixed a small bug, wrote Qnode isntead of QNode * Updated falqon to use qml.expval instead of qml.ExpvalCost * updated optimized measurement tutorial to make use of qml.expval, still need to test with CI * debugging measurement optimize tutorial * The bug regarding Qnodes is well known, just made a change the Christina suggested as a temporary fix * Updated molecular geometry optimization tutorial to make use of qml.expval * Updated qaoa tutorial to make use of qml.expval, updated docs in both examples to remove qml.ExpValCost * Updated vqe and vqe qng tutorials to use qml.expval(H) * Updated the vqe soin sectors demo with qml.expval, fixed a typo in overview of vqe tutorial * Updated parallel vqe tutorial to remove dependance on qml.ExpvalCost, was not able to fully test this because I don't have rigitti setup * Updated these tutorials to remove qml.ExpvalCost dependance * Cleaning up some typos and comments * Updated measurement optimization tutorial to make use of qml.Tracker * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: antalszava <antalszava@gmail.com> * Updated tutorials based on pr comments * Fixed bug in the spsa demo * clean up * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * cleaned up docs * Cleaning up documentation * added comment * Update demonstrations/braket-parallel-gradients.py Co-authored-by: antalszava <antalszava@gmail.com> * Clean up - added variable num_wires to mol_geo_opt tutorial - replaced new_graph.nodes with dev.wires to clairfy iteration over wires * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_qaoa_intro.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqe_qng.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Address comments - made circuit a qnode to prevent the need to initialize multiple qnodes one after another Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> * sources + yml * add diff job * on push * branch name * unzip with path * updates * tutorials from master and dev too * path to script * Update diffs found * add toc and references * Update diffs found * comments * mv to .github/workflows dedicated folder * diffs document updates * revert changes to tutorial_vqe_qng.py * Update .github/workflows/html_parser.py Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * suggestions * no sys * Move demo_diff.md so that workflows access is not required * change trigger and branch Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: QML demo checker Bot <> Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update templates access and remove template decorator (#360) * Update pyscf version. (#273) Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> * Update qnode.draw to qml.draw() (#352) * pin pyparsing (#357) * replaced pad --> pad_with in this tutorial as it has now been deprecated (#359) * Update templates. Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * Remove use of the init module everywhere (#361) * Update pyscf version. (#273) Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> * Update qnode.draw to qml.draw() (#352) * pin pyparsing (#357) * replaced pad --> pad_with in this tutorial as it has now been deprecated (#359) * Add an action for demo output checking (#356) * Update demos to make use of the new qml.sample and qml.expval(H) functionality (story #: 8118) (#330) * Updated qsim to use the new qml.sample functionality **needs to be tested ! ** * just removed one commented line * Updated one of the paragraphs to be consistent with the changes * Updated coherent vqls to use the builtin functionality of qml.sample, also tested it locally and it seems to run without errors! * updated qaoa_maxcut to use new qml.sample functionality * updated vqls tutorial to make use of the new functionality of qml.sample * Made some changes to chem reaction tutorial, want to confirm with CI to see if it works properly because I can't run it locally * fixed quick little bug with wires in circuit def * quick change to help debug error in CI * Found the bug with chem_reactions tutorial, hopefully this fixes it * updated falqon tutorial and removed dependance on qml.ExpvalCost, still need to confirm it works with CI * fixed a small bug, wrote Qnode isntead of QNode * Updated falqon to use qml.expval instead of qml.ExpvalCost * updated optimized measurement tutorial to make use of qml.expval, still need to test with CI * debugging measurement optimize tutorial * The bug regarding Qnodes is well known, just made a change the Christina suggested as a temporary fix * Updated molecular geometry optimization tutorial to make use of qml.expval * Updated qaoa tutorial to make use of qml.expval, updated docs in both examples to remove qml.ExpValCost * Updated vqe and vqe qng tutorials to use qml.expval(H) * Updated the vqe soin sectors demo with qml.expval, fixed a typo in overview of vqe tutorial * Updated parallel vqe tutorial to remove dependance on qml.ExpvalCost, was not able to fully test this because I don't have rigitti setup * Updated these tutorials to remove qml.ExpvalCost dependance * Cleaning up some typos and comments * Updated measurement optimization tutorial to make use of qml.Tracker * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: antalszava <antalszava@gmail.com> * Updated tutorials based on pr comments * Fixed bug in the spsa demo * clean up * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * cleaned up docs * Cleaning up documentation * added comment * Update demonstrations/braket-parallel-gradients.py Co-authored-by: antalszava <antalszava@gmail.com> * Clean up - added variable num_wires to mol_geo_opt tutorial - replaced new_graph.nodes with dev.wires to clairfy iteration over wires * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_qaoa_intro.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqe_qng.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Address comments - made circuit a qnode to prevent the need to initialize multiple qnodes one after another Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> * sources + yml * add diff job * on push * branch name * unzip with path * updates * tutorials from master and dev too * path to script * Update diffs found * add toc and references * Update diffs found * comments * mv to .github/workflows dedicated folder * diffs document updates * revert changes to tutorial_vqe_qng.py * Update .github/workflows/html_parser.py Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * suggestions * no sys * Move demo_diff.md so that workflows access is not required * change trigger and branch Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: QML demo checker Bot <> * remove init module everywhere * minor improvement * add 2pi scaling * Update demonstrations/spsa.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_doubly_stochastic.py Co-authored-by: antalszava <antalszava@gmail.com> * add low and high; scale argument * add low and high; scale argument * use pad_with Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * Requires grad updates (#364) * chemical * tutorial_mol_geo_opt * tutorial_vqe_spin_sectors * vqe; remove - option due to redundancy warning * rotoselect * natural grad demo * qgrnn * local cost func demo, requires_grad=True * format * gaussian transformation * qaoa intro * adaptive * variational classifier * Update demonstrations/tutorial_local_cost_functions.py Co-authored-by: Christina Lee <christina@xanadu.ai> * update with assignment * suggestion + requires_grad specify * qonn.py Co-authored-by: Christina Lee <christina@xanadu.ai> * requires_grad=True (#366) * use approx='block-diag' instead of diag_approx=False (#365) Co-authored-by: Josh Izaac <josh146@gmail.com> * increase the number of epochs (#368) * last bit of requires_grad=True changes (#370) Co-authored-by: Christina Lee <christina@xanadu.ai> * Prepare `dev` to be merged into `master` (#373) * Update pyscf version. (#273) Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> * Update qnode.draw to qml.draw() (#352) * pin pyparsing (#357) * replaced pad --> pad_with in this tutorial as it has now been deprecated (#359) * Add an action for demo output checking (#356) * Update demos to make use of the new qml.sample and qml.expval(H) functionality (story #: 8118) (#330) * Updated qsim to use the new qml.sample functionality **needs to be tested ! ** * just removed one commented line * Updated one of the paragraphs to be consistent with the changes * Updated coherent vqls to use the builtin functionality of qml.sample, also tested it locally and it seems to run without errors! * updated qaoa_maxcut to use new qml.sample functionality * updated vqls tutorial to make use of the new functionality of qml.sample * Made some changes to chem reaction tutorial, want to confirm with CI to see if it works properly because I can't run it locally * fixed quick little bug with wires in circuit def * quick change to help debug error in CI * Found the bug with chem_reactions tutorial, hopefully this fixes it * updated falqon tutorial and removed dependance on qml.ExpvalCost, still need to confirm it works with CI * fixed a small bug, wrote Qnode isntead of QNode * Updated falqon to use qml.expval instead of qml.ExpvalCost * updated optimized measurement tutorial to make use of qml.expval, still need to test with CI * debugging measurement optimize tutorial * The bug regarding Qnodes is well known, just made a change the Christina suggested as a temporary fix * Updated molecular geometry optimization tutorial to make use of qml.expval * Updated qaoa tutorial to make use of qml.expval, updated docs in both examples to remove qml.ExpValCost * Updated vqe and vqe qng tutorials to use qml.expval(H) * Updated the vqe soin sectors demo with qml.expval, fixed a typo in overview of vqe tutorial * Updated parallel vqe tutorial to remove dependance on qml.ExpvalCost, was not able to fully test this because I don't have rigitti setup * Updated these tutorials to remove qml.ExpvalCost dependance * Cleaning up some typos and comments * Updated measurement optimization tutorial to make use of qml.Tracker * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: antalszava <antalszava@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: antalszava <antalszava@gmail.com> * Updated tutorials based on pr comments * Fixed bug in the spsa demo * clean up * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * cleaned up docs * Cleaning up documentation * added comment * Update demonstrations/braket-parallel-gradients.py Co-authored-by: antalszava <antalszava@gmail.com> * Clean up - added variable num_wires to mol_geo_opt tutorial - replaced new_graph.nodes with dev.wires to clairfy iteration over wires * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/qsim_beyond_classical.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_coherent_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_qaoa_intro.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqe_qng.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_vqls.py Co-authored-by: Maria Schuld <mariaschuld@gmail.com> * Update demonstrations/tutorial_mol_geo_opt.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_qaoa_maxcut.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Address comments - made circuit a qnode to prevent the need to initialize multiple qnodes one after another Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> * sources + yml * add diff job * on push * branch name * unzip with path * updates * tutorials from master and dev too * path to script * Update diffs found * add toc and references * Update diffs found * comments * mv to .github/workflows dedicated folder * diffs document updates * revert changes to tutorial_vqe_qng.py * Update .github/workflows/html_parser.py Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> * suggestions * no sys * Move demo_diff.md so that workflows access is not required * change trigger and branch Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: QML demo checker Bot <> * Update header.html * Update xanadu.css_t * Update demo checker path (#363) * remove unnecessary steps (display files); update the path where the markdown file is being stored * temporarily add workflow execution when pushing to branch * Update to a non-protected branch * comment * torch and tensorflow requirement bumps * get numpy required by TF 2.6 * remove push trigger * keras 2.6 (#369) * Added tkt tutorial (#371) * Added tkt tutorial * Updated tkt tutorial * Changed tutorial_tkt and built locally * Apply suggestions from code review * Delete junit.xml Co-authored-by: Catalina Albornoz <catalina@xanadu.ai> Co-authored-by: Nathan Killoran <co9olguy@users.noreply.github.com> * Updating demos to be consistent with the new breaking changes. (#367) * Updating demos to be consistent with the new breaking changes. - Updated link in pytorch noise - Removed .template when calling templates - Need to update IBMQ decice * more fixed then before but still getting some weird seg-faults * updated the use of tape.execute --> qml.execute * Qubit Unitary got a decomposition, had to stop expanding the quantum tape at the operator to match the ascii art display Co-authored-by: Josh Izaac <josh146@gmail.com> * Update demonstrations/tutorial_multiclass_classification.py Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: CatalinaAlbornoz <albornoz.catalina@hotmail.com> Co-authored-by: Catalina Albornoz <catalina@xanadu.ai> Co-authored-by: Nathan Killoran <co9olguy@users.noreply.github.com> * update requirements * Increase cache (`dev`) (#385) * JAX new version changes required * Revert "JAX new version changes required" This reverts commit 7b514ac. * no jit (temp) * get the norm check updated branch * dummy change to run the demo * increase the cache number * get v0.19.1-rc0 branch * Update demonstrations/tutorial_general_parshift.py * increase the cache and continue pulling PennyLane master * Stop importing QNode from beta folder in mitigation demo (#392) * Update the backprop demo to work with the latest PL master (#391) * Fix jax demo to work with the latest version of PennyLane (#393) * Fixes the JAX demo * fix * `dev` branch fixes (#396) * fix tutorial_classical_shadows.py * pin to latest lightning * get cmake * update * change order of installs * pip install cmake * gcc8 image * newer circleci image * spectrum -> qnode_spectrum (#397) * use plt.show for the general parameter shift demo (#400) * Fix demo diffs with PennyLane release v0.20.0 (#402) * Fix metrix_tensor warning about approximation * set the expansion strategy for the metrology demo * Add max_diff to quantum analytic descent Co-authored-by: antalszava <antalszava@gmail.com> * use draw_mpl method and set device expansion (#398) * use draw_mpl * qonn uses draw transform rather than method * Update demonstrations/qonn.py Co-authored-by: antalszava <antalszava@gmail.com> * plt.show * Add `expansion_strategy="device"` ... to printed circuits with templates. * Update demonstrations/tutorial_local_cost_functions.py * Update demonstrations/tutorial_local_cost_functions.py * Update demonstrations/tutorial_local_cost_functions.py * print after plt.show Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: dime10 <dime10@users.noreply.github.com> * Pin qiskit==0.32.0 temporarily (`dev`) (#404) * pin Qiskit and dummy modify the demos where the change should occur * change the order of statements to trigger the docs build * Revert "Pin qiskit==0.32.0 temporarily (`dev`) (#404)" (#406) This reverts commit cabe82a. * qhack * update SF dependency * fix * fix * fix * fix * Make demos using Forest non-automatically run (#408) * rename demos that would use Forest such that they are not automatically run; remove the Forest dep * no quilc or qvm run * Add outputs with images to ensemble multi qpu demo * vqe parallel outputs * more width * path and width fix * last updated; correct png * image * Update requirements.txt * Update requirements * add qubit tapering tutorial * add background theory * update rst tile * correct refs * add optimal sector * modify introduction * modify the unitary operator text * add energy calculations * fix build issues * add ref and correct typo * add HeH cation * add state and HF energy * add vqe simulation * correct line lengths and typos * add section titles * add image * rearrange text and create intro * correct equation * correct math equation * apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * apply review comments * add example to intro * modify tapering process in intro * add imports * remove qubit coupled cluster * apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * explain eigenvalue sector with more details * modify example hamiltonian * correct math typo * add review comments * correct Hamiltonian symbol * fit line length * Specify `diff_method=None` in `tutorial_jax_transformations.py` (#418) * Re-add diff_method=None to jax transform PR * increase no output timeout time * Python unbeffered * revert 30m * change to using a machine instance * increment the cache * Revert "increment the cache" This reverts commit 74f8a32. * Revert "change to using a machine instance" This reverts commit f22a6d2. * temporarily get release Lightning * no python buffer export * Update requirements.txt * Update requirements.txt * update requirements * pin markupsafe==2.0.1 (#433) * Updated demo to avoid the soon to be deprecated qml.finite_diff func (#431) Co-authored-by: antalszava <antalszava@gmail.com> * add review comments * Change querying matrices as per the new API (#437) * obtaining matrix * inc cache number * update circuit drawing (#438) * Update tutorial_vqt.py (#440) * Use `cirq_pasqal` (#443) * cirq_pasqal * inc cache num * bump: TF, Keras, NumPy and Mitiq * NumPy * torch no_grad used with plotting * Qiskit Aer NoiseModel will be updating the .from_backend() method to take backend objects directly (#444) * Update quantum volume Demo with instructions to configure IBM Q account (#445) * Qiskit Aer NoiseModel will be updating the .from_backend() method to take backend objects directly * added note about how to setup IBM Q account * fix note display in docs * more formating * fix link * formatting again * Update demonstrations/quantum_volume.py Co-authored-by: David Ittah <dime10@users.noreply.github.com> * Update demonstrations/quantum_volume.py Co-authored-by: David Ittah <dime10@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: antalszava <antalszava@gmail.com> * Update requirements * update SF version * Update (#465) * Update `requirements.txt` (#466) * update requirements.txt * No qchem needed * Update quantum volume demonstration as per drawing updates (#471) * Add the show matrices option * Update demonstrations/quantum_volume.py Co-authored-by: Christina Lee <chrissie.c.l@gmail.com> Co-authored-by: Christina Lee <chrissie.c.l@gmail.com> * Update spsa (#464) * Update * Update demonstrations/spsa.py Co-authored-by: antalszava <antalszava@gmail.com> * Fix QChem related demo errors, get latest Lightning & pin Cirq (#467) * install Lightning in the runner using Test PyPi * try installing PennyLane rc * pin openfermionpyscf and comment * Pull Lightning from Test PyPi * Measurement optimize adjust * cache * h5py version pin * req file * pin Cirq-core and cirq-pasqal * revert method='pyscf' in adaptive demo * Trigger CI * reset cache * no comma needed * set requires_grad as false for hamiltonian coeffs (#473) * use qchem * add code review comments * Remove QChem in the text (#474) * Update mitiq demo drawing (#476) * draw tape with new pipeline * length * stable -> latest (#477) * update cross ref * Apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * use qml.eigvals * Update dependencies in quantum chemistry tutorial (#475) * add new image * Apply suggestions from code review Co-authored-by: antalszava <antalszava@gmail.com> * resource class & parallel * no parallel * increment requirements * correct qchem crossrefs * update the date * update posted date * correct links * Apply suggestions from code review Co-authored-by: Utkarsh <utkarshazad98@gmail.com> * remove blank lines * modify format * add dots * correct fci energy * correct eigvals * add qubit tapering tutorial * add background theory * update rst tile * correct refs * add optimal sector * modify introduction * modify the unitary operator text * add energy calculations * fix build issues * add ref and correct typo * add HeH cation * add state and HF energy * add vqe simulation * correct line lengths and typos * add section titles * add image * rearrange text and create intro * correct equation * correct math equation * apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * apply review comments * add example to intro * modify tapering process in intro * add imports * remove qubit coupled cluster * apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * explain eigenvalue sector with more details * modify example hamiltonian * correct math typo * add review comments * correct Hamiltonian symbol * fit line length * add review comments * use qchem * add code review comments * update cross ref * Apply suggestions from code review Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> * use qml.eigvals * add new image * correct qchem crossrefs * update the date * update posted date * correct links * Apply suggestions from code review Co-authored-by: Utkarsh <utkarshazad98@gmail.com> * remove blank lines * modify format * add dots * correct fci energy * correct eigvals * update requirements * Update date on demonstrations/tutorial_qubit_tapering.py * Add Diff HF demo as related demo on demonstrations/tutorial_qubit_tapering.py * Correct typo on demonstrations/tutorial_qubit_tapering.py * Add bio to demonstrations/tutorial_qubit_tapering.py * Update "about the author" in demonstrations/tutorial_qubit_tapering.py * Update about the author in demonstrations/tutorial_qubit_tapering.py * Update about the author in demonstrations/tutorial_qubit_tapering.py * Update about the author demonstrations/tutorial_qubit_tapering.py * Update about the author in demonstrations/tutorial_qubit_tapering.py * Link to VQE tutorial on demonstrations/tutorial_qubit_tapering.py Co-authored-by: Josh Izaac <josh146@gmail.com> * Add link to molecular hamiltonian demo on demonstrations/tutorial_qubit_tapering.py * Update author in demonstrations/tutorial_qubit_tapering.py Co-authored-by: GitHub Nightly Merge Action <actions@github.com> Co-authored-by: Josh Izaac <josh146@gmail.com> Co-authored-by: antalszava <antalszava@gmail.com> Co-authored-by: Jay Soni <jbsoni@uwaterloo.ca> Co-authored-by: Maria Schuld <mariaschuld@gmail.com> Co-authored-by: Olivia Di Matteo <2068515+glassnotes@users.noreply.github.com> Co-authored-by: Olivia Di Matteo <dimatteo.olivia@gmail.com> Co-authored-by: Romain <rmoyard@gmail.com> Co-authored-by: Christina Lee <christina@xanadu.ai> Co-authored-by: CatalinaAlbornoz <albornoz.catalina@hotmail.com> Co-authored-by: Catalina Albornoz <catalina@xanadu.ai> Co-authored-by: Nathan Killoran <co9olguy@users.noreply.github.com> Co-authored-by: Tom Bromley <49409390+trbromley@users.noreply.github.com> Co-authored-by: David Ittah <dime10@users.noreply.github.com> Co-authored-by: ixfoduap <40441298+ixfoduap@users.noreply.github.com> Co-authored-by: Christina Lee <chrissie.c.l@gmail.com> Co-authored-by: Utkarsh <utkarshazad98@gmail.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.