Update README.MD

README.MD

@@ -22,8 +22,8 @@ Cloud Connections depending on the device model. We believe these configurations
 - Note: Where we mention S30 in this documentation that also applies to S40, E30 and M30
 - If you are having problems with your S40 - please make sure you have software version 04.25.0070 or greater installed. You also may need to shutdown HA and reboot the thermostats in order to establish a connection.
 - It is recommended to disable automatic software updates on the Thermostat. This will prevent outages if new versions are not compatible with this integration.
-- If you have more than one S30 in your local network, please use a different app_id for each instance (e.g. homeassistant_1, homeassistant_2)
-- If you are running more than 1 Home Assistant communicating to the S30 (for example a test and prod system) - you _MUST_ use a different _app_id_ for each instance - [Detailed Configuration](#Detailed-Configuration-Parameters)
+- If using a local connection and you have more than one S30 in your local network, please use a different app_id for each instance (e.g. homeassistant_1, homeassistant_2). If using a Cloud Connection DO NOT change the default app_id.
+- If you are running more than 1 Home Assistant communicating to cloud or locally - you _MUST_ use a different _app_id_ for each instance - [Detailed Configuration](#Detailed-Configuration-Parameters)
 - **WARNING** If using the Power Inverter or Diagnostic Sensors - S30 stability problems may arise if your system is connected to the Lennox Cloud. Please review [docs/diagnostics.md](./docs/diagnostics.md) before using.
 - Equipment Parameters - documentation is here [docs/parameters.md](./docs/parameters.md)
 - Passwords with special characters are not properly supported by the Lennox Cloud API and may not work. Known special characters that cause issues are & and ^. If your password contains these characters you may need to change it prior to using the integration.