imxrt: flexio move registers to hardware header

arch/arm/src/imxrt/hardware/imxrt_flexio.h

@@ -39,7 +39,7 @@
 #define IMXRT_FLEXIO_SHIFTSTAT_OFFSET     0x0010 /* Shifter Status Register, offset: 0x10 */
 #define IMXRT_FLEXIO_SHIFTERR_OFFSET      0x0014 /* Shifter Error Register, offset: 0x14 */
 #define IMXRT_FLEXIO_TIMSTAT_OFFSET       0x0018 /* Timer Status Register, offset: 0x18 */
-#define IMXRT_FLEXIO_SHIFTSIEN_OFFSET     0x0020 /* Shift Enable, offset: 0x20 */ 
+#define IMXRT_FLEXIO_SHIFTSIEN_OFFSET     0x0020 /* Shift Enable, offset: 0x20 */
 #define IMXRT_FLEXIO_SHIFTEIEN_OFFSET     0x0024 /* Shifter Error Interrupt Enable, offset: 0x24 */
 #define IMXRT_FLEXIO_TIMIEN_OFFSET        0x0028 /* Timer Interrupt Enable Register, offset: 0x28 */
 #define IMXRT_FLEXIO_SHIFTSDEN_OFFSET     0x0030 /* Shifter Status DMA Enable, offset: 0x30 */
@@ -740,4 +740,205 @@
 
 #define FLEXIO_SHIFTBUFNIS_COUNT                 (8u)
 
+
+/* Calculate FlexIO timer trigger. */
+
+#define FLEXIO_TIMER_TRIGGER_SEL_PININPUT(x)   ((uint32_t)(x) << 1u)
+#define FLEXIO_TIMER_TRIGGER_SEL_SHIFTnSTAT(x) (((uint32_t)(x) << 2u) | 0x1u)
+#define FLEXIO_TIMER_TRIGGER_SEL_TIMn(x)       (((uint32_t)(x) << 2u) | 0x3u)
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/* Define time of timer trigger polarity. */
+
+enum flexio_timer_trigger_polarity_e
+{
+  FLEXIO_TIMER_TRIGGER_POLARITY_ACTIVE_HIGH = 0x0u, /* Active high. */
+  FLEXIO_TIMER_TRIGGER_POLARITY_ACTIVE_LOW  = 0x1u, /* Active low. */
+};
+
+/* Define type of timer trigger source. */
+
+enum flexio_timer_trigger_source_e
+{
+  FLEXIO_TIMER_TRIGGER_SOURCE_EXTERNAL = 0x0u, /* External trigger selected. */
+  FLEXIO_TIMER_TRIGGER_SOURCE_INTERNAL = 0x1u, /* Internal trigger selected. */
+};
+
+/* Define type of timer/shifter pin configuration. */
+
+enum flexio_pin_config_e
+{
+  FLEXIO_PIN_CONFIG_OUTPUT_DISABLED           = 0x0u, /* Pin output disabled. */
+  FLEXIO_PIN_CONFIG_OPEN_DRAIN_OR_BIDIRECTION = 0x1u, /* Pin open drain or bidirectional output enable. */
+  FLEXIO_PIN_CONFIG_BIDIRECTION_OUTPUT_DATA   = 0x2u, /* Pin bidirectional output data. */
+  FLEXIO_PIN_CONFIG_OUTPUT                    = 0x3u, /* Pin output. */
+};
+
+/* Definition of pin polarity. */
+
+enum flexio_pin_polarity_e
+{
+  FLEXIO_PIN_ACTIVE_HIGH = 0x0u, /* Active high. */
+  FLEXIO_PIN_ACTIVE_LOW  = 0x1u, /* Active low. */
+};
+
+/* Define type of timer work mode. */
+
+enum flexio_timer_mode_e
+{
+  FLEXIO_TIMER_MODE_DISABLED            = 0x0u, /* Timer Disabled. */
+  FLEXIO_TIMER_MODE_DUAL8_BIT_BAUD_BIT  = 0x1u, /* Dual 8-bit counters baud/bit mode. */
+  FLEXIO_TIMER_MODE_DUAL8_BIT_PWM       = 0x2u, /* Dual 8-bit counters PWM mode. */
+  FLEXIO_TIMER_MODE_SINGLE16_BIT        = 0x3u, /* Single 16-bit counter mode. */
+};
+
+/* Define type of timer initial output or timer reset condition. */
+
+enum flexio_timer_output_e
+{
+  FLEXIO_TIMER_OUTPUT_ONE_NOT_AFFECTED_BY_RESET   = 0x0u, /* Logic one when enabled and is not affected by timer reset. */
+  FLEXIO_TIMER_OUTPUT_ZERO_NOT_AFFECTED_BY_RESET  = 0x1u, /* Logic zero when enabled and is not affected by timer reset. */
+  FLEXIO_TIMER_OUTPUT_ONE_AFFECTED_BY_RESET       = 0x2u, /* Logic one when enabled and on timer reset. */
+  FLEXIO_TIMER_OUTPUT_ZERO_AFFECTED_BY_RESET      = 0x3u, /* Logic zero when enabled and on timer reset. */
+};
+
+/* Define type of timer decrement. */
+
+enum flexio_timer_decrement_source_e
+{
+  FLEXIO_TIMER_DEC_SRC_ON_FLEX_IO_CLOCK_SHIFT_TIMER_OUTPUT = 0x0u, /* Decrement counter on FlexIO clock, Shift clock equals Timer output. */
+  FLEXIO_TIMER_DEC_SRC_ON_TRIGGER_INPUT_SHIFT_TIMER_OUTPUT,        /* Decrement counter on Trigger input (both edges), shift clock equals Timer output. */
+  FLEXIO_TIMER_DEC_SRC_ON_PIN_INPUT_SHIFT_PIN_INPUT,               /* Decrement counter on Pin input (both edges), Shift clock equals Pin input. */
+  FLEXIO_TIMER_DEC_SRC_ON_TRIGGER_INPUT_SHIFT_TRIGGER_INPUT        /* Decrement counter on Trigger input (both edges), Shift clock equals Trigger input. */
+};
+
+/* Define type of timer reset condition. */
+
+enum flexio_timer_reset_condition_e
+{
+  FLEXIO_TIMER_RESET_NEVER                                  = 0x0u, /* Timer never reset. */
+  FLEXIO_TIMER_RESET_ON_TIMER_PIN_EQUAL_TO_TIMER_OUTPUT     = 0x2u, /* Timer reset on Timer Pin equal to Timer Output. */
+  FLEXIO_TIMER_RESET_ON_TIMER_TRIGGER_EQUAL_TO_TIMER_OUTPUT = 0x3u, /* Timer reset on Timer Trigger equal to Timer Output. */
+  FLEXIO_TIMER_RESET_ON_TIMER_PIN_RISING_EDGE               = 0x4u, /* Timer reset on Timer Pin rising edge. */
+  FLEXIO_TIMER_RESET_ON_TIMER_TRIGGER_RISING_EDGE           = 0x6u, /* Timer reset on Trigger rising edge. */
+  FLEXIO_TIMER_RESET_ON_TIMER_TRIGGER_BOTH_EDGE             = 0x7u, /* Timer reset on Trigger rising or falling edge. */
+};
+
+/* Define type of timer disable condition. */
+
+enum flexio_timer_disable_condition_e
+{
+  FLEXIO_TIMER_DISABLE_NEVER                          = 0x0u, /* Timer never disabled. */
+  FLEXIO_TIMER_DISABLE_ON_PRE_TIMER_DISABLE           = 0x1u, /* Timer disabled on Timer N-1 disable. */
+  FLEXIO_TIMER_DISABLE_ON_TIMER_COMPARE               = 0x2u, /* Timer disabled on Timer compare. */
+  FLEXIO_TIMER_DISABLE_ON_TIMER_COMPARE_TRIGGER_LOW   = 0x3u, /* Timer disabled on Timer compare and Trigger Low. */
+  FLEXIO_TIMER_DISABLE_ON_PIN_BOTH_EDGE               = 0x4u, /* Timer disabled on Pin rising or falling edge. */
+  FLEXIO_TIMER_DISABLE_ON_PIN_BOTH_EDGE_TRIGGER_HIGH  = 0x5u, /* Timer disabled on Pin rising or falling edge provided Trigger is high. */
+  FLEXIO_TIMER_DISABLE_ON_TRIGGER_FALLING_EDGE        = 0x6u, /* Timer disabled on Trigger falling edge. */
+};
+
+/* Define type of timer enable condition. */
+
+enum flexio_timer_enable_condition_e
+{
+  FLEXIO_TIMER_ENABLED_ALWAYS                         = 0x0u, /* Timer always enabled. */
+  FLEXIO_TIMER_ENABLE_ON_PREV_TIMER_ENABLE            = 0x1u, /* Timer enabled on Timer N-1 enable. */
+  FLEXIO_TIMER_ENABLE_ON_TRIGGER_HIGH                 = 0x2u, /* Timer enabled on Trigger high. */
+  FLEXIO_TIMER_ENABLE_ON_TRIGGER_HIGH_PIN_HIGH        = 0x3u, /* Timer enabled on Trigger high and Pin high. */
+  FLEXIO_TIMER_ENABLE_ON_PIN_RISING_EDGE              = 0x4u, /* Timer enabled on Pin rising edge. */
+  FLEXIO_TIMER_ENABLE_ON_PIN_RISING_EDGE_TRIGGER_HIGH = 0x5u, /* Timer enabled on Pin rising edge and Trigger high. */
+  FLEXIO_TIMER_ENABLE_ON_TRIGGER_RISING_EDGE          = 0x6u, /* Timer enabled on Trigger rising edge. */
+  FLEXIO_TIMER_ENABLE_ON_TRIGGER_BOTH_EDGE            = 0x7u, /* Timer enabled on Trigger rising or falling edge. */
+};
+
+/* Define type of timer stop bit generate condition. */
+
+enum flexio_timer_stop_bit_condition_e
+{
+  FLEXIO_TIMER_STOP_BIT_DISABLED                        = 0x0u, /* Stop bit disabled. */
+  FLEXIO_TIMER_STOP_BIT_ENABLE_ON_TIMER_COMPARE         = 0x1u, /* Stop bit is enabled on timer compare. */
+  FLEXIO_TIMER_STOP_BIT_ENABLE_ON_TIMER_DISABLE         = 0x2u, /* Stop bit is enabled on timer disable. */
+  FLEXIO_TIMER_STOP_BIT_ENABLE_ON_TIMER_COMPARE_DISABLE = 0x3u, /* Stop bit is enabled on timer compare and timer disable. */
+};
+
+/* Define type of timer start bit generate condition. */
+
+enum flexio_timer_start_bit_condition_e
+{
+  FLEXIO_TIMER_START_BIT_DISABLED = 0x0u, /* Start bit disabled. */
+  FLEXIO_TIMER_START_BIT_ENABLED  = 0x1u, /* Start bit enabled. */
+};
+
+/* FlexIO as PWM channel output state */
+
+enum flexio_timer_output_state_e
+{
+  FLEXIO_PWM_LOW = 0u, /* The output state of PWM channel is low */
+  FLEXIO_PWM_HIGH,     /* The output state of PWM channel is high */
+};
+
+/* Define type of timer polarity for shifter control. */
+
+enum flexio_shifter_timer_polarity_e
+{
+  FLEXIO_SHIFTER_TIMER_POLARITY_ON_POSITIVE = 0x0u, /* Shift on positive edge of shift clock. */
+  FLEXIO_SHIFTER_TIMER_POLARITY_ON_NEGATIVE = 0x1u, /* Shift on negative edge of shift clock. */
+};
+
+/* Define type of shifter working mode. */
+
+enum flexio_shifter_mode_e
+{
+  FLEXIO_SHIFTER_DISABLED               = 0x0u, /* Shifter is disabled. */
+  FLEXIO_SHIFTER_MODE_RECEIVE           = 0x1u, /* Receive mode. */
+  FLEXIO_SHIFTER_MODE_TRANSMIT          = 0x2u, /* Transmit mode. */
+  FLEXIO_SHIFTER_MODE_MATCH_STORE       = 0x4u, /* Match store mode. */
+  FLEXIO_SHIFTER_MODE_MATCH_CONTINUOUS  = 0x5u, /* Match continuous mode. */
+  FLEXIO_SHIFTER_MODE_STATE             = 0x6u, /* SHIFTBUF contents are used for storing programmable state attributes. */
+  FLEXIO_SHIFTER_MODE_LOGIC = 0x7u,             /* SHIFTBUF contents are used for implementing programmable logic look up table. */
+};
+
+/* Define type of shifter input source. */
+
+enum flexio_shifter_input_source_e
+{
+  FLEXIO_SHIFTER_INPUT_FROM_PIN                 = 0x0u, /* Shifter input from pin. */
+  FLEXIO_SHIFTER_INPUT_FROM_NEXT_SHIFTER_OUTPUT = 0x1u, /* Shifter input from Shifter N+1. */
+};
+
+/* Define of STOP bit configuration. */
+
+enum flexio_shifter_stop_bit_e
+{
+  FLEXIO_SHIFTER_STOP_BIT_DISABLE = 0x0u, /* Disable shifter stop bit. */
+  FLEXIO_SHIFTER_STOP_BIT_LOW     = 0x2u, /* Set shifter stop bit to logic low level. */
+  FLEXIO_SHIFTER_STOP_BIT_HIGH    = 0x3u, /* Set shifter stop bit to logic high level. */
+};
+
+/* Define type of START bit configuration. */
+
+enum flexio_shifter_start_bit_e
+{
+  FLEXIO_SHIFTER_START_BIT_DISABLED_LOAD_DATA_ON_ENABLE = 0x0u, /* Disable shifter start bit, transmitter loads data on enable. */
+  FLEXIO_SHIFTER_START_BIT_DISABLED_LOAD_DATA_ON_SHIFT  = 0x1u, /* Disable shifter start bit, transmitter loads data on first shift. */
+  FLEXIO_SHIFTER_START_BIT_LOW                          = 0x2u, /* Set shifter start bit to logic low level. */
+  FLEXIO_SHIFTER_START_BIT_HIGH                         = 0x3u, /* Set shifter start bit to logic high level. */
+};
+
+/* Define FlexIO shifter buffer type */
+
+enum flexio_shifter_buffer_type_e
+{
+  FLEXIO_SHIFTER_BUFFER                     = 0x0u, /* Shifter Buffer N Register. */
+  FLEXIO_SHIFTER_BUFFER_BIT_SWAPPED         = 0x1u, /* Shifter Buffer N Bit Byte Swapped Register. */
+  FLEXIO_SHIFTER_BUFFER_BYTE_SWAPPED        = 0x2u, /* Shifter Buffer N Byte Swapped Register. */
+  FLEXIO_SHIFTER_BUFFER_BIT_BYTE_SWAPPED    = 0x3u, /* Shifter Buffer N Bit Swapped Register. */
+  FLEXIO_SHIFTER_BUFFER_NIBBLE_BYTE_SWAPPED = 0x4u, /* Shifter Buffer N Nibble Byte Swapped Register. */
+  FLEXIO_SHIFTER_BUFFER_HALF_WORD_SWAPPED   = 0x5u, /* Shifter Buffer N Half Word Swapped Register. */
+  FLEXIO_SHIFTER_BUFFER_NIBBLE_SWAPPED      = 0x6u, /* Shifter Buffer N Nibble Swapped Register. */
+};
+
 #endif /* __ARCH_ARM_SRC_IMXRT_HARDWARE_IMXRT_FLEXIO_H */