stable release: v0.1.9
current release: v1.0.0-prealpha
CURRENTLY BREAKING APIs, stick with the stable release
UPDATE: almost finished the brakage, things should be stable enough
RaptorQ is a Forward Error Correction algorithm designed to deliver your data efficiently and without retransmissions for lost packets.
After sending K packets of your data as-is, RaptorQ generates as many repair symbols as you need. Once the receiver has at least K symbols, be it the source symbols, repair symbols or any combination of the two, it can reconstruct the whole input it was meant to receive.
This is called a Fountain code, and RaptorQ is the latest and most efficient code in this category.
libRaptorQ implements RFC6330, which specifies the RaptorQ algorithm.
Since the RFC is really complex, there is also a simpler (and maybe slightly faster)
RAW API that you can use. The RFC API is not recommended due to the RFC complexity.
libRaptorQ is a header-only library written in C++11, and uses eigen to handle matrix
manipulation.
Although header-only, the library can be compiled to create shared and static libraries
with both C and C++98 compatibility.
Currently it's only been tested under Linux, but should work well under *BSD and MacOSX, too.
Unfortunately Windows is not supported. support for is broken, so you can not compile it with Visual Studio 2015.
- RFC6330 API (complex, not recommended)
- RAW API (simpler, recommended)
- multi language:
- header only C++11
- compiled, C
- compiled, C++98
- cached precomputations (configurable)
- shared precomputations between processes
See the CONTRIBUTING file.
Although things seems to work, no stable release has been released yet.
This means you can only check this out with git.
to check out the repository:
$ git clone https://github.com/LucaFulchir/libRaptorQ.git
you can also get it from our main server:
$ git clone https://www.fenrirproject.org/Luker/libRaptorQ.git
Once you have cloned it, it's always a good thing to check the repository gpg signatures, so you can import my key with:
2016 key:
$ gpg --keyserver pgp.mit.edu --recv-key F61F6137
2015 key:
$ gpg --keyserver pgp.mit.edu --recv-key D42DDF0A
please check the full fingerprint, it should be like this:
$ gpg2 --fingerprint F61F6137
pub rsa2048/F61F6137 2016-01-11 [expires: 2017-01-25]
Key fingerprint = 95EB 6FA4 03D7 29A7 13C2 FC9F F85A DA1C F61F 6137
uid [ultimate] Luca Fulchir (2016 key) <luker@fenrirproject.org>
full 2015 fingerprint:
Key fingerprint = AB35 E45F 5CA5 E35B 8B55 818F 0157 D133 D42D DF0ANow you have the source, and the key, it's enough to check the signature of the last commit:
$ git log -n 1 --show-signature
The important part is that you get something like this:
gpg: Signature made Mon 11 Jan 2016 14:19:21 CET using RSA key ID F61F6137
gpg: Good signature from "Luca Fulchir (2016 key) <luker@fenrirproject.org>"
[unknown]
gpg: WARNING: This key is not certified with a trusted signature!
gpg: There is no indication that the signature belongs to the owner.
Primary key fingerprint: 95EB 6FA4 03D7 29A7 13C2 FC9F F85A DA1C F61F 6137
Author: Luca Fulchir <luker@fenrirproject.org>And as long as you got the right key, and you find the "gpg: Goog signature", you can be sure you have the right code.
TDB: The repository is using the maintainer private key for now, it will start using a dedicated key in the (near) future.
libRaptorQ depends from Eigen3 and LZ4
In case your system does not have Eigen3, Eigenv3.2.8 is included
in the source files, so you do not need it.
LZ4 is included as a git submodule, so if you do not have it, run:
git submodule init
git submodule update
To get the library, which will be statically linked and NOT INSTALLED
on your system.
The build system uses CMake. So enter the source directory and we'll create a directory and build everything there:
$ mkdir build
$ cd build
$ cmake -DCMAKE_BUILD_TYPE=Release ../
$ make -j 4Optional targets are available:
$ make tests examples docs
where:
- tests: benchmarks, rfc tests.
- examples: C/C++ examples
- docs: LATEX documentation.
or simply:
$ make -j 4 everything
finally, install everything
$ make install
libRaptorQ uses deterministic (reproducible) builds, so if you compile it twice, or on two different computers (but with the same compiler), the hash of the resulting libraries will be the same.
There are combinations of compiler and LTO/Profiling that break deterministic builds, so check the cmake warnings.
You can customize the CMake build with the following variables:
PROFILING ON/OFF: Default:ON. Activate or deactivate profiling.
Profiling compiles everything, then runs a test to see
which code paths are more used. Then it recompiles everything
but optimizing for for those code paths.
Only for gcc/clang.
LTO ON/OFF: Default:ON. Activate or deactivate Link time Optimization
Makes the library smaller and better optimized.
Only for gcc/clang.
CLANG_STDLIB ON/OFF: Default:OFF. use clang's libc++
Note: only clang can use its standard library
USE_LZ4 ON/OFF: use the lz4 compression for caching precomputations.
Default: ON
CLI ON/OFF Build Command Line Interface tools.
CMAKE_C_COMPILER gcc, clang...
CMAKE_CXX_COMPILER choose between g++ or clang++.
RQ_LINKER gold/ld/bsd Choose your linker. Default:autodetect.
CMAKE_BUILD_TYPE Debug,MinSizeRel,Release,RelWithDebInfo
CMAKE_INSTALL_PREFIX Default: /usr/local
For the C++11, header-only version, you can include:
- "RaptorQ/RaptorQ_v1_hdr.hpp"
- "RaptorQ/RFC6330_v1_hdr.hpp"
For the linked, C+98/C++11 API:
- "RaptorQ/RaptorQ_v1.hpp"
- "RaptorQ/RFC6330_v1.hpp"
For the linked, C API:
- "RaptorQ/RaptorQ.h"
- "RaptorQ/RFC6330.h"
The C++ api is completely in sync between the linked and header-only version, so you can switch between the two just by changing the included header file.
You can compile a PDF of the documentation by doing:
$ make docs
Or you can simply visit the wiki for the full up-to-date documentation.