BOM List? #27
-
|
I have been looking Repository and I cant find the BOM for the chips where can I get this? |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments 4 replies
-
|
PCB design was made in KiCad and you can export BOM directly from project files. For convenience I've added interactive BOM to the repository. It's available here: https://github.com/Polprzewodnikowy/SummerCart64/tree/main/hw/pcb (it's the |
Beta Was this translation helpful? Give feedback.
-
|
I made a Mouser BOM (Europe/Germany): https://docs.google.com/spreadsheets/d/1_DJ6nkfRS_0Ek4hWqmCfaDy2YjqefE8Kuxw5ttvrsLA/edit?usp=sharing |
Beta Was this translation helpful? Give feedback.
-
|
Are the ferrite beads correct in that BOM? In the Interactive BOM I think it says 470Ohm |
Beta Was this translation helpful? Give feedback.
-
|
No, ferrite beads are correct. That's why they are also named L1 and L2 and not R1 and R2 |
Beta Was this translation helpful? Give feedback.
-
|
Ferrite beads should be 470 Ohm at 100 MHz. Your BOM has 47 Ohm value instead. |
Beta Was this translation helpful? Give feedback.
-
|
Ups thanks for your hint. I changed them to "Ferritperlen 470ohms 1A 150mOhms 0603 Ferrite Chip". |
Beta Was this translation helpful? Give feedback.
PCB design was made in KiCad and you can export BOM directly from project files. For convenience I've added interactive BOM to the repository. It's available here: https://github.com/Polprzewodnikowy/SummerCart64/tree/main/hw/pcb (it's the
sc64v2_bom.htmlfile)Due to different requirements per PCB manufacturer you need to export gerber files from the project yourself. Please note that required PCB thickness for this project is 1.2 mm and ENIG plating is highly recommended.