PowerArubaCX

This is a Powershell module for configure an ArubaCX Switch.

With this module (version 0.6.0) you can manage:

Firmware (Get)
Interfaces (Add/Get/Set/Remove LAG, Loopback, Vlans)
LLDP Neighbor (Get)
System (Get/Set)
Users (Get)
Vlans (Add/Get/Set/Remove)
VRF (Add/Get/Set/Remove)
VM (Deploy and Configure ArubaCX OVA (for initial setup))

There is some extra feature

Invoke API using Invoke-ArubaCXRestMethod

Multi Connection

More functionality will be added later.

Tested with ArubaCX 8400 and 832x, 6x00 (using >= 10.06.xx firmware) on Windows/Linux/macOS

Usage

All resource management functions are available with the Powershell verbs GET, ADD, SET, REMOVE.

For example, you can manage Vlans with the following commands:

Get-ArubaCXVlans
Add-ArubaCXVlans
Set-ArubaCXVlans
Remove-ArubaCXVlans

Requirements

Powershell 7 (Core) or 5 (If possible get the latest version)
An ArubaCX Switch (with firmware >= 10.06.xx) and REST API enable

Instructions

Install the module

# Automated installation (Powershell 5 and later):
    Install-Module PowerArubaCX

# Import the module
    Import-Module PowerArubaCX

# Get commands in the module
    Get-Command -Module PowerArubaCX

# Get help
    Get-Help Invoke-ArubaCXRestMethod -Full

Examples

Connecting to the Aruba Switch

The first thing to do is to connect to an ArubaCX Switch with the command Connect-ArubaCX:

# Connect to the Aruba CX Switch
    Connect-ArubaCX 192.0.2.1

#we get a prompt for credential

Vlans Management

You can create a new Vlan Add-ArubaCXVlans, retrieve its information Get-ArubaCXVlans, modify its properties Set-ArubaCXVlans, or delete it Remove-ArubaCXVlans.

# Create a vlan
    Add-ArubaCXVlans -id 85 -Name 'PowerArubaCX'

    [...]
    admin                             : up
    clear_ip_bindings                 :
    description                       :
    [...]
    id                                : 85
    [...]
    name                              : PowerArubaCX
    nd_snoop_config                   : @{enable=False; ra_drop_enable=False}
    nd_snooping_prefix                : {}
    oper_state                        : down
    oper_state_reason                 : no_member_port
    [...]
    type                              : static
    voice                             : False
    vsx_sync                          : {}


# Get information about vlan
    Get-ArubaCXVlans -id 85 -attributes admin, description, id, name, type, voice | Format-Table

    admin description id name         type   voice
    ----- ----------- -- ----         ----   -----
    up                85 PowerArubaCX static False

# Change settings of a vlan (Description and voice)
    Get-ArubaCXVlans -id 85 | Set-ArubaCXVlans -description "Add via PowerArubaCX" -voice

    [...]
    admin                             : up
    clear_ip_bindings                 :
    description                       : Add via PowerArubaCX
    [...]
    id                                : 85
    [...]
    name                              : PowerArubaCX
    nd_snoop_config                   : @{enable=False; ra_drop_enable=False}
    nd_snooping_prefix                : {}
    oper_state                        : down
    oper_state_reason                 : no_member_port
    [...]
    type                              : static
    voice                             : True
    vsx_sync                          : {}


# Remove a vlan
    Get-ArubaCXVlans -name PowerArubaCX | Remove-ArubaCXVlans

For configure a vlan to an interface, need to use Set-ArubaCXInterfaces

Invoke API

for example to get ArubaCX System Configuration

# get Aruba CX System configuration using API
    Invoke-ArubaCXRestMethod -method "get" -uri "system" -selector configuration

    aaa                                : @{fail_through=False; login_lockout_time=300; radius_auth=pap; radius_retries=1;
                                        radius_timeout=5; ssh_passkeyauthentication_enable=True;
                                        ssh_publickeyauthentication_enable=True; tacacs_auth=pap; tacacs_timeout=5}
    all_user_copp_policies             : {}
    arp_config                         : @{gc_threshold=131072; timeout=30}
    bfd_detect_multiplier              : 5
    bfd_echo_disable                   : False
    bfd_enable                         : False
    bfd_min_echo_rx_interval           : 500
    bfd_min_rx_interval                : 3000
    bfd_min_tx_interval                : 3000
    checkpoint_post_config             : @{disable=False; timeout=300}
    dhcp_config                        :
    dlog_destination                   :
    dns_servers                        : {}
    ecmp_config                        :
    hostname                           : PowerArubaCX-SW1
    hpe_rda_enable                     : False
    icmp_redirect_disable              : False
    icmp_unreachable_disable           : False
    icmp_unreachable_ratelimit         : 1000

[...]
# get only Aruba CX System hostname and dns servers
    Invoke-ArubaCXRestMethod -method "get" -uri "system" -attributes hostname, dns_servers

    dns_servers hostname
    ----------- --------
    {}          PowerArubaCX-SW1

to get API uri, go to ArubaCX Swagger (https://ArubaCX-IP/api/v10.04/)

And choice a service (for example System)

Interface

On ArubaCX, on interface, there is all type of interface physical/system and virtual (LAG, Loopback, Vlans)

You can create a new interface (LAG, Loopback, Vlans) Add-ArubaCXInterfaces, retrieve its information Get-ArubaCXInterfaces, modify its properties Set-ArubaCXInterfaces or delete it Remove-ArubaCXInterfaces. There is also extra cmdlets for Add Add-ArubaCXInterfacesVlansTrunks / Remove Remove-ArubaCXInterfacesVlansTrunks Vlans trunks on interface (physical or LAG) or for Add Add-ArubaCXInterfacesLagInterface or Remove Remove-ArubaCXInterfacesLagInterface member (physical) interface on LAG.

Interface Physical (System)

#Get interface 1/1/1 configuration
    Get-ArubaCXInterfaces 1/1/1 -selector configuration

    aaa_auth_precedence                  :
    aclmac_in_cfg                        :
    aclmac_in_cfg_version                :
    aclmac_out_cfg                       :
    aclmac_out_cfg_version               :
    aclv4_in_cfg                         :
    aclv4_in_cfg_version                 :
    aclv4_out_cfg                        :
    aclv4_out_cfg_version                :
    aclv6_in_cfg                         :
    aclv6_in_cfg_version                 :
    aclv6_out_cfg                        :
    aclv6_out_cfg_version                :
    admin                                : up
    [...]

#Get name, admin state and link state of interface

    Get-ArubaCXInterfaces 1/1/1 -attributes name, admin_state, link_state

    admin_state link_state name
    ----------- ---------- ----
    down        down       1/1/1

#Configure interface 1/1/1 (Description, admin and routing)

    Get-ArubaCXInterfaces 1/1/1 | Set-ArubaCXInterfaces -description "Changed by PowerArubaCX" -admin up -routing:$false

    [...]
    admin                                   : up
    [...]
    description                             : Changed by PowerArubaCX
    [...]
    name                                    : 1/1/1
    [...]
    routing                                 : False
    [...]

#Configure interface 1/1/1 on vlan access 85

    Get-ArubaCXInterfaces -interface 1/1/1 | Set-ArubaCXInterfaces -vlan_mode access -vlan_tag 85

    name                                    : 1/1/1
    [...]
    vlan_mode                               : access
    vlan_tag                                : @{85=/rest/v10.04/system/vlans/85}
    [...]

#Configure interface 1/1/1 on native-untagged mode with vlan 85 and tagged vlan 44

    Get-ArubaCXInterfaces -interface 1/1/1 | Set-ArubaCXInterfaces -vlan_mode native-untagged -vlan_tag 85 -vlan_trunks 44

    name                                    : 1/1/1
    [...]
    vlan_mode                               : native-untagged
    vlan_tag                                : @{85=/rest/v10.04/system/vlans/85}
    vlan_trunks                             : @{44=/rest/v10.04/system/vlans/44}

#Configure interface 1/1/1 and add vlan 45 to trunks

    Get-ArubaCXInterfaces -interface 1/1/1 | Add-ArubaCXInterfacesVlanTrunks -vlan_trunks 45

    name                                    : 1/1/1
    [...]
    vlan_mode                               : native-untagged
    vlan_tag                                : @{85=/rest/v10.04/system/vlans/85}
    vlan_trunks                             : @{44=/rest/v10.04/system/vlans/44; 45=/rest/v10.04/system/vlans/45}
    [...]

#Configure interface 1/1/1 with a IPv4 address

    Get-ArubaCXInterfaces -interface 1/1/1 | Set-ArubaCXInterfaces -ip4_address 192.0.2.1 -ip4_mask 24

    name                                    : 1/1/1
    [...]
    ip4_address                             : 192.0.2.1/24
    [...]

Interface LAG

#Add LAG 1 with member interface 1/1/1

    Add-ArubaCXInterfaces -lag_id 1 admin up -interfaces 1/1/3 -lacp active

    name                                    : lag1
    [...]
    interfaces                              : @{1/1/3=/rest/v10.09/system/interfaces/1%2F1%2F3}
    [...]
    lacp                                    : active
    [...]

#Configure Access vlan 44 on LAG 1

    Get-ArubaCXInterfaces lag1 | Set-ArubaCXInterfaces -vlan_tag 44 -vlan_mode access

    name                                    : lag1
    [...]
    vlan_mode                               : access
    vlan_tag                                : @{44=/rest/v10.09/system/vlans/44}
    [...]

#Configure Trunk vlan 44,45 on LAG 1

    Get-ArubaCXInterfaces lag1 | Set-ArubaCXInterfaces -vlan_tag 1 -vlan_trunks 44,45 -vlan_mode native-untagged 

    name                                    : lag1
    [...]
    vlan_mode                               : native-untagged
    vlan_tag                                : @{1=/rest/v10.09/system/vlans/1}
    vlan_trunks                             : @{44=/rest/v10.09/system/vlans/44; 45=/rest/v10.09/system/vlans/45}
    [...]

#Add interface 1/1/2 on LAG 1

    Get-ArubaCXInterfaces lag1 | Add-ArubaCXInterfacesLagInterfaces -interfaces 1/1/2

    name                                    : lag1
    [...]
    interfaces                              : @{1/1/2=/rest/v10.09/system/interfaces/1%2F1%2F2; 1/1/3=/rest/v10.09/system/interfaces/1%2F1%2F3}
    [...]
    lacp                                    : active
    [...]

#Remove interface 1/1/3 on LAG 1

    Get-ArubaCXInterfaces lag1 | Remove-ArubaCXInterfacesLagInterfaces -interfaces 1/1/3

    name                                    : lag1
    [...]
    interfaces                              : @{1/1/2=/rest/v10.09/system/interfaces/1%2F1%2F2}
    [...]
    lacp                                    : active
    [...]

#Remove LAG 1

    Get-ArubaCXInterfaces lag1 | Remove-ArubaCXInterfaces

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove interface" on target "lag1".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y

Interface Loopback

#Add interface loopback 1 with a IPv4 Address (you need to add vlan before)

    Add-ArubaCXInterfaces -loopback_id 1 -ip4_address 192.0.2.44 -ip4_mask 24

    name                                    : loopback1
    [...]
    active_ip4_address                      : 192.0.2.44/24
    [...]
    ip4_address                             : 192.0.2.44/24
    [...]

#Change IP Address of interface loopback 1

    Get-ArubaCXInterfaces loopback1 | Set-ArubaCXInterfaces -ip4_address 192.0.2.254 -ip4_mask 24

    name                                    : loopback1
    [...]
    active_ip4_address                      : 192.0.2.254/24
    [...]
    ip4_address                             : 192.0.2.254/24
    [...]

#Set VRF Blue on interface loopback 1(need to create vrf before)

    Get-ArubaCXInterfaces loopback1 | Set-ArubaCXInterfaces -vrf blue

    name                                    : loopback1
    [...]
    vrf                                     : @{blue=/rest/v10.09/system/vrfs/blue}
    [...]

#Remove interface loopback 1

    Get-ArubaCXInterfaces loopback1 | Remove-ArubaCXInterfaces

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove interface" on target "loopback1".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y

Interface Vlans

#Add interface vlan 44 with a IPv4 Address (you need to add vlan before)

    Add-ArubaCXInterfaces -vlan_id 44 -ip4_address 192.0.2.44 -ip4_mask 24

    name                                    : vlan44
    [...]
    active_ip4_address                      : 192.0.2.44/24
    [...]
    ip4_address                             : 192.0.2.44/24
    [...]

#Change IP Address of interface vlan 44

    Get-ArubaCXInterfaces vlan44 | Set-ArubaCXInterfaces -ip4_address 192.0.2.254 -ip4_mask 24

    name                                    : vlan44
    [...]
    active_ip4_address                      : 192.0.2.254/24
    [...]
    ip4_address                             : 192.0.2.254/24
    [...]

#Set VRF Blue on interface vlan 44 (need to create vrf before)

    Get-ArubaCXInterfaces vlan44 | Set-ArubaCXInterfaces -vrf blue

    name                                    : vlan44
    [...]
    vrf                                     : @{blue=/rest/v10.09/system/vrfs/blue}
    [...]

#Remove interface vlan 44

    Get-ArubaCXInterfaces vlan44 | Remove-ArubaCXInterfaces

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove interface" on target "vlan44".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y

LLDP Neighbor

#Get LLDP Neighbor of All Ports

    Get-ArubaCXLLDPNeighbor

    %2F1%2F8                                                                                                                1%2F1%2F9
    ---------                                                                                                                ---------
    @{08:00:09:0d:2d:06,1/1/9=/rest/v10.09/system/interfaces/1%2F1%2F8/lldp_neighbors/08%3A00%3A09%3A0d%3A2d%3A06,1%2F1%2F9} @{08:00:09:0d:2d:06,1/1/8=/rest/v10.09/system/interfaces/1%2F1%2F9/lldp_neighbors/08%3A00%3A09%3…

#Get LLDP Neighbor of port 1/1/8 with depth 2

    Get-ArubaCXLLDPNeighbor 1/1/8 -depth 2

    08:00:09:0d:2d:06,1/1/9
    -----------------------
    @{chassis_id=08:00:09:0d:2d:06; dcbx_cee_status=; mac_addr=08:00:09:0d:2d:06; med_network_policy=; neighbor_info=; neighbor_info_organizational=; port_id=1/1/9}

#To Get all info, you can use

    (Get-ArubaCXLLDPNeighbor 1/1/8 -depth 2).'08:00:09:0d:2d:06,1/1/9'

    chassis_id                   : 08:00:09:0d:2d:06
    dcbx_cee_status              :
    mac_addr                     : 08:00:09:0d:2d:06
    med_network_policy           :
    neighbor_info                : @{associated_poe_tlv_for_pd=dot3; chassis_capability_available=Bridge, Router; chassis_capability_enabled=Bridge, Router; chassis_description=Aruba ABC123  Virtual.10.09.0002;
                                chassis_id_len=6; chassis_id_subtype=link_local_addr; chassis_index=1; chassis_name=switch; chassis_protocol=LLDP; chassis_refcount=2; chassis_ttl=120; eee_wake_time_fallback=0;
                                eee_wake_time_rx=0; eee_wake_time_rx_echo=0; eee_wake_time_tx=0; eee_wake_time_tx_echo=0; macphy_autoneg_advertised=Other; macphy_autoneg_enabled=0; macphy_autoneg_support=0;
                                macphy_mau_type= ; mgmt_iface_list=33554433; mgmt_iface_oid_list=1.3.6.1.2.1.31.1.1.1.1.33554433; mgmt_ip_list=192.0.2.44; pd_dot3_ext_tlv_advertised=False; pd_dot3_tlv_advertised=False;
                                pd_med_tlv_advertised=False; port_description=1/1/9; port_hidden_in=0; port_hidden_out=0; port_id_len=5; port_id_subtype=if_name;port_lastchange=61ed751e; port_lastupdate=61ed764a;
                                port_mfs=0; port_protocol=LLDP; power_allocated=0; power_allocated_pair_a=0; power_allocated_pair_b=0; power_class=Class0; power_devicetype=PSE; power_enabled=1; power_paircontrol=0;
                                power_pairs=SIGNAL; power_powertype=None; power_priority=Unknown; power_requested=0; power_requested_pair_a=0; power_requested_pair_b=0; power_source=Unknown; power_supported=1;
                                remote_index=2}
    neighbor_info_organizational : @{1=; 2=; 3=}
    port_id                      : 1/1/9

#and for neighbor info

    (Get-ArubaCXLLDPNeighbor 1/1/8 -depth 2).'08:00:09:0d:2d:06,1/1/9'.neighbor_info

    associated_poe_tlv_for_pd    : dot3
    chassis_capability_available : Bridge, Router
    chassis_capability_enabled   : Bridge, Router
    chassis_description          : Aruba ABC123  Virtual.10.09.0002
    chassis_id_len               : 6
    chassis_id_subtype           : link_local_addr
    chassis_index                : 1
    chassis_name                 : switch
    chassis_protocol             : LLDP
    chassis_refcount             : 2
    chassis_ttl                  : 120
    eee_wake_time_fallback       : 0
    eee_wake_time_rx             : 0
    eee_wake_time_rx_echo        : 0
    eee_wake_time_tx             : 0
    eee_wake_time_tx_echo        : 0
    macphy_autoneg_advertised    : Other
    macphy_autoneg_enabled       : 0
    macphy_autoneg_support       : 0
    macphy_mau_type              :
    mgmt_iface_list              : 33554433
    mgmt_iface_oid_list          : 1.3.6.1.2.1.31.1.1.1.1.33554433
    mgmt_ip_list                 : 192.0.2.44
    pd_dot3_ext_tlv_advertised   : False
    pd_dot3_tlv_advertised       : False
    pd_med_tlv_advertised        : False
    port_description             : 1/1/9
    port_hidden_in               : 0
    port_hidden_out              : 0
    port_id_len                  : 5
    port_id_subtype              : if_name
    port_lastchange              : 61ed751e
    port_lastupdate              : 61ed7686
    port_mfs                     : 0
    port_protocol                : LLDP
    power_allocated              : 0
    power_allocated_pair_a       : 0
    power_allocated_pair_b       : 0
    power_class                  : Class0
    power_devicetype             : PSE
    power_enabled                : 1
    power_paircontrol            : 0
    power_pairs                  : SIGNAL
    power_powertype              : None
    power_priority               : Unknown
    power_requested              : 0
    power_requested_pair_a       : 0
    power_requested_pair_b       : 0
    power_source                 : Unknown
    power_supported              : 1
    remote_index                 : 2

Firmware

Tor Get Firmware information on Aruba CX Switch

#Get Firmware info

    Get-ArubaCXFirmware -attribute current_version -Verbose

    current_version   : FL.10.09.0002
    primary_version   : FL.10.09.0002
    secondary_version : FL.10.09.0002
    default_image     : primary
    booted_image      : primary

#Get Firmware Status

    Get-ArubaCXFirmware -status

    date reason status
    ---- ------ ------
    0    none   none

System

for example to get/set ArubaCX System settings

#Get ALL system settings

    Get-ArubaCXSystem

    aaa                                             : @{dot1x_auth_enable=False; dot1x_remote_auth_method=eap-radius; fail_through=False; login_lockout_time=300; 
                                                    mac_auth_address_format=no-delimiter; mac_auth_enable=False; mac_auth_radius_auth_method=chap; 
                                                    portaccess_local_accounting_enable=False; radius_auth=pap; radius_retries=1; radius_timeout=5; 
                                                    radius_tracking_time_interval=300; radius_tracking_user_name=radius-tracking-user; tacacs_auth=pap; 
                                                    tacacs_timeout=5; tacacs_tracking_time_interval=300; tacacs_tracking_user_name=tacacs-tracking-user}
    aaa_accounting_attributes                       : /rest/v10.04/system/aaa_accounting_attributes
    aaa_server_group_prios                          : /rest/v10.04/system/aaa_server_group_prios
    aaa_server_groups                               : /rest/v10.04/system/aaa_server_groups
    acl_object_groups                               : /rest/v10.04/system/acl_object_groups
    acls                                            : /rest/v10.04/system/acls
    admin_password_set                              : True
    [...]

#Get hostname and timezone system settings

    Get-ArubaCXSystem -attribute hostname, timezone

    hostname    timezone
    --------    --------
    switch      UTC

#Set hostname

    Set-ArubaCXSystem -hostname PowerArubaCX-Switch

    [...]
    hostname                                        : PowerArubaCX-Switch
    [...]

#Set timezone

    Set-ArubaCXSystem -timezone Europe/Paris

    [...]
    timezone                                        : Europe/Paris
    [...]

#Set a setting don't have (yet) parameter (usb_disable)

    $system = Get-ArubaCXSystem -selector writable
    $system.usb_disable = $true
    $system | Set-ArubaCXSystem -use_pipeline

    [...]
    usb_disable                                     : True
    [...]

Users

You can get Users (local account) of Aruba CX

#Get ALL local user
    Get-ArubaCXUsers

    admin
    -----
    /rest/v10.09/system/users/admin

#Get info about admin local user

    Get-ArubaCXUsers -user admin

    authorized_keys :
    name            : admin
    origin          : built-in
    password        : AQBapU0TkclkN5abVvBfWakRLdEwQAuF4jP3oqWRlwxj4avqYgAAAFw0UPMjwXH1xvCD00IaJ5YMo+OxvaA853gdPSu4cjkzvYlKIuQvQ52v6YH1wtxbBIU5nht+RMM2thytQZO7PNut4PNFnNwUP22h0Aq16IdEy2Oc2ma0csZ00l+TaGa4o8Ja
    user_group      : @{administrators=/rest/v10.09/system/user_groups/administrators}

VRF

You can create a new VRF Add-ArubaCXVrfs, retrieve its information Get-ArubaCXVrfs, modify its properties Set-ArubaCXVrfs, or delete it Remove-ArubaCXVrfs.

# Create a vrf
    Add-ArubaCXVrfs -name blue

    [...]
    https_server                            :
    [...]
    name                                    : blue
    [...]
    rd                                      :
    [...]
    snmp_enable                             : False
    [...]
    source_interface                        :
    source_ip                               :
    ssh_enable                              :
    [...]

# Get information about a vrf
    Get-ArubaCXvrfs -name blue -attributes name, https_server, rd, ssh_enable, snmp_enable

    https_server :
    name         : blue
    rd           :
    snmp_enable  : False
    ssh_enable   :

# Change settings of a vrf (rd, snmp, ssh, https)
    Get-ArubaCXVrfs blue | Set-ArubaCXVrfs -ssh_enable -https_server -snmp_enable -rd 11:22

    [...]
    https_server                            : @{enable=True}
    [...]
    name                                    : blue
    [...]
    rd                                      : 11:22
    [...]
    snmp_enable                             : True
    [...]
    source_interface                        :
    source_ip                               :
    ssh_enable                              : True
    [...]

# Remove a vrf
    Get-ArubaCXVrfs blue | Remove-ArubaCXVrfs

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove Vrf blue" on target "Vrf".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y

VM

You can use PowerArubaCX for help to deploy Aruba CX OVA on VMware ESXi (With a vCenter) You need to have VMware.PowerCLI and Set-VMKeystrokes from William Lam

You can use the following cmdlet (on this order)

Deploy-ArubaCXVm Deploy CPPM OVA with add hard disk
Set-ArubaCXVMFirstBootPassword Configure first boot (Password...)
Set-ArubaCXVMMgmtOobm Configure OOBM Interface (ip, default-gateway)

MultiConnection

From release 0.4.0, it is possible to connect on same times to multi Aruba CX You need to use -connection parameter to cmdlet

For example to get system of 2 ArubaCX

# Connect to first ArubaCX
    $cx1 = Connect-ArubaCX 192.0.2.1 -SkipCertificateCheck -DefaultConnection:$false

#DefaultConnection set to false is not mandatory but only don't set the connection info on global variable

# Connect to second ArubaCX
    $cx2 = Connect-ArubaCX 192.0.2.2 -SkipCertificateCheck -DefaultConnection:$false

    # Get System hostname and mgmt  interface for first ArubaCX Switch
    Get-ArubaCXSystem -attributes mgmt_intf, hostname -connection $cx1

    hostname             mgmt_intf
    --------             ---------
    PowerArubaCX-Switch1 @{admin_state=up; default_gateway=10.200.11.254; dns_server_1=10.200.11.254; dns_server_2=0.0.0.0; ip=10.200.11.1; mode=static;

# Get Interface for second ArubaCX Switch
    Get-ArubaCXSystem -attributes mgmt_intf, hostname -connection $cx2

    hostname             mgmt_intf
    --------             ---------
    PowerArubaCX-Switch2 @{admin_state=up; default_gateway=10.200.11.254; dns_server_1=10.200.11.254; dns_server_2=0.0.0.0; ip=10.200.11.2; mode=static;

#Each cmdlet can use -connection parameter

Disconnecting

# Disconnect from the Aruba CX Switch
    Disconnect-ArubaCX

List of available command

Add-ArubaCXEvpnVlans
Add-ArubaCXInterfaces
Add-ArubaCXInterfacesLagInterfaces
Add-ArubaCXInterfacesVlanTrunks
Add-ArubaCXVlans
Add-ArubaCXVrfs
Confirm-ArubaCXInterfaces
Confirm-ArubaCXSystem
Confirm-ArubaCXVlans
Confirm-ArubaCXVrfs
Connect-ArubaCX
Deploy-ArubaCXVm
Disconnect-ArubaCX
Get-ArubaCXFirmware
Get-ArubaCXInterfaces
Get-ArubaCXLLDPNeighbor
Get-ArubaCXSystem
Get-ArubaCXUsers
Get-ArubaCXVlans
Get-ArubaCXVrfs
Invoke-ArubaCXRestMethod
Remove-ArubaCXInterfaces
Remove-ArubaCXInterfacesLagInterfaces
Remove-ArubaCXInterfacesVlanTrunks
Remove-ArubaCXVlans
Remove-ArubaCXVrfs
Set-ArubaCXCipherSSL
Set-ArubaCXInterfaces
Set-ArubaCXSystem
Set-ArubaCXuntrustedSSL
Set-ArubaCXVlans
Set-ArubaCXVMFirstBootPassword
Set-ArubaCXVMMgmtOobm
Set-ArubaCXVrfs
Show-ArubaCXException

Name		Name	Last commit message	Last commit date
Latest commit History 431 Commits
.github/workflows		.github/workflows
.vscode		.vscode
Medias		Medias
PowerArubaCX		PowerArubaCX
Tests		Tests
LICENSE		LICENSE
README.md		README.md

License

PowerAruba/PowerArubaCX

Folders and files

Latest commit

History

Repository files navigation

PowerArubaCX

Usage

Requirements

Instructions

Install the module

Examples

Connecting to the Aruba Switch

Vlans Management

Invoke API

Interface

Interface Physical (System)

Interface LAG

Interface Loopback

Interface Vlans

LLDP Neighbor

Firmware

System

Users

VRF

VM

MultiConnection

Disconnecting

List of available command

Author

Special Thanks

License

About

Topics

Resources

License

Stars

Watchers

Forks

Languages