Plus3_V4.2.13

If you are encoutering some issue after this update, try to do a factory reset first

UPDATE

1. SOC Update: WiFi settings will be preserved after updates.
2. Material Handling: Changing 'Unload' button to 'Replace' button.

   The old 'Unload' button, which involved direct retraction of the filament, is replaced by a new 'Replace' function. This improved method requires removing the bowden tube, cutting the filament, and then extruding it forward. After these steps, you should reattach the bowden tube and load the new filament.

   Please note that direct retraction is still possible by heating and clicking the upward arrow button. However, be aware of the increased risk of clogging when using this method.

3. Heating Limit: Maximum chamber heating restricted to 65 degrees Celsius.
4. Factory Reset: Also clears web-based print records and accumulated time.
5. SSH Login: Added login info.
6. The Set z-offset button in the calibration page will not longer based on last z-offset value, it will start from 0.

• SOC_Version:V4.2.13
• Matching UI version：V4.2.13
• Please download PLUS_ V4.2.13.rar.It's packaged version

NOTE：
Updating from a higher version to a lower version can cause various problems, please do not update from a higher version to a lower version

Plus3_V4.2.12

UPDATE

FUNCTIONALITY UPDATE

1. Enhanced Filament Loading/Unloading During Printing: Modified the logic for filament loading and unloading. For unloading, a prompt to cut the filament is displayed.
2. Modified Filament Loading Sizes: Options for filament loading sizes are now 20mm, 50mm, and 100mm.
3. Deletion of Previous Print Cache Files Upon Update: The update will now automatically delete previously stored print cache files.
4. Updated Default Save Parameters: By default, the filament runout detection will be enabled after the update.
5. Preservation of Original Offset Values: The compensation values in the klipper_config/configuration will be retained post-update.
6. Removal of Last Travel Distance in Leveling Record: The leveling process now starts from zero travel distance.

UI UPDATE

1. UI Changes for Filament Runout Detection: Modified the interface icons corresponding to the enable/disable state during printing.
2. Memory Full Pop-Up Notification: Added a notification for when the memory is full.
3. Addition of an 'Updating' Interface: Introduced an interface screen that displays during updates.

BUG FIX

1. Fixed Leveling Completion Screen Freeze: Removed the conditional check after pressing the button, allowing for an unconditional transition to the next screen.

• SOC_Version:V4.2.12
• Matching UI version：V4.2.12
• Please download PLUS_ V4.2.12.rar.It's packaged version

Please contact our customer support if UI update fail (Persistent white screen).

NOTE：
Updating from a higher version to a lower version can cause various problems, please do not update from a higher version to a lower version

Plus3_V4.2.10

UPDATE

1.Optimized the logic of material breakage detection
2.Optimized page jump logic after resonance
3.Added the function of exporting logs
4.Revise and reset the factory settings function
5.Adjusted the rising distance during boot up guidance

• SOC_Version:V4.2.10
• Matching UI version：V4.2.10
• Please download MAX_ V4.2.10.rar.It's packaged version

NOTE：
Updating from a higher version to a lower version can cause various problems, please do not update from a higher version to a lower version

Plus3_V4.2.8

UPDATE

1.Added factory reset
2.Selecting a file for printing through a network page can now display a preview image on the screen normally

• SOC_Version:V4.2.8
• Matching UI version：V4.2.8
• Please download MAX_ V4.2.8.zip.It's packaged version

Plus3_V4.2.5

UPDATE

1.Fixed an abnormal prompt bug that triggered material return detection during material return
2.Add a screen rest function. If the machine is not operated on a non printing interface, it will enter a screen stop state after 5 minutes.
3.Add a separate Z offset value function button.You can adjust the Z offset value before printing
4.Optimize the file printing logic, now printing files through USB will cache them to disk space on the machine.
5.Optimize the leveling logic, now the z-offset value will be saved instead of reset

• SOC_Version:V4.2.5
• Matching UI version：V4.2.5
• Please download SMART_ V4.2.5.zip.It's packaged version

Plus3_V4.2.3

UPDATE

1. Optimization of WiFi refresh lag problem
2. The material prompt interface now has the option of 'no longer prompt'

• SOC_Version:V4.2.3
• Matching UI version：V4.2.3
• Please download SMART_ V4.2.3.zip.It's packaged version

Plus3_V4.2.2

Plus3
SOC_Version:V4.2.2
Matching UI version：V4.2.2
Please download PLUS_ V4.2.2.zip.It's packaged version

Plus3_V4.2.0

Plus3
SOC_Version:V4.2.0
Matching UI version：V4.2.0
Please download PLUS_ V4.2.0.rar.It's packaged version