Update x230.md

docs/coreboot/x230.md

@@ -243,7 +243,7 @@ read existing BIOS and transfer it to build machine
 
 1) Read upper bios chip (4MB)
    ```
-   pi@raspberrypi:~ $ flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -c "MX25L3205D/MX25L3208D" -r x230-bios-top1.bin
+   pi@raspberrypi:~ $ flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -c "MX25L3206E/MX25L3208E" -r x230-bios-top1.bin
    flashrom p1.0-69-g3f7e341 on Linux 4.14.30-v7+ (armv7l)
    flashrom is free software, get the source code at https://flashrom.org
 
@@ -256,7 +256,7 @@ read existing BIOS and transfer it to build machine
 
 2) Read lower bios chip (8MB)
    ```
-   pi@raspberrypi:~ $ flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -r x230-bios-bottom1.bin
+   pi@raspberrypi:~ $ flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -c "MX25L6406E/MX25L6408E" -r x230-bios-bottom1.bin
    flashrom p1.0-69-g3f7e341 on Linux 4.14.30-v7+ (armv7l)
    flashrom is free software, get the source code at https://flashrom.org
 
@@ -432,7 +432,7 @@ I have moved the coreboot-ROM files to a new directory ~/ROM-ready on the raspbe
 Logon to the pi and flash both chips:
 ```
 # write top chip (4MB)
-pi@raspberrypi:~/ROM-ready $ sudo flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -c "MX25L3205D/MX25L3208D" -w x230-coreboot-4mb.rom 
+pi@raspberrypi:~/ROM-ready $ sudo flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -c "MX25L3206E/MX25L3208E" -w x230-coreboot-4mb.rom 
 flashrom p1.0-69-g3f7e341 on Linux 4.14.30-v7+ (armv7l)
 flashrom is free software, get the source code at https://flashrom.org
 
@@ -443,7 +443,7 @@ Erasing and writing flash chip... Erase/write done.
 Verifying flash... VERIFIED.
 
 # write bottom chip (8MB)
-pi@raspberrypi:~/ROM-ready $ sudo flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -w x230-coreboot-8mb.rom 
+pi@raspberrypi:~/ROM-ready $ sudo flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -c "MX25L6406E/MX25L6408E" -w x230-coreboot-8mb.rom 
 flashrom p1.0-69-g3f7e341 on Linux 4.14.30-v7+ (armv7l)
 flashrom is free software, get the source code at https://flashrom.org
 
@@ -459,77 +459,6 @@ now it is time to cross fingers and try if you was able to flash coreboot.
 Remove the Pomodo-Clip, put your keyboard back, put your battery in and power on.
 In case you run into any problems, you can always reflash your stock rom.
 
-
-
-## From my older notes (FIXME!) 
-(this needs to be rewritten/updated to the above procedure)
-
---- on your raspberry pi ---
-
-0) Put External Flash Clip, female jumper cables and Raspberry pi together
-   (kind of a lego thing)
-
-1) Install Raspberian on Pi using Noobs
-
-2) Update Pi and install additional packages including 'flashrom'
-
-3) take keyboard and palmrest of your "coreboot target laptop" (target) off
-   to access the BIOS Chip(s)
-
-4) Connect the BIOS-Clip to BIOS-chips and read the content from your pi
-   (x230-default-part2-4mb.rom / x230-default-part2-8mb.rom)
-
-5) merge the two files into one 12 MB ROM file
-   (x230-default-12mb.rom)
-
---- on your build laptop ---
-
-6) Copy all three files to your "build laptop" (laptop)
-   Build Laptop must run Linux, this howto assumes you are using Ubuntu 16.04.3 LTS
-   (could also be installed on an USB thumbdrive or external harddrive)
-
-7) Download Coreboot from GIT
-
-7) Install UEFITool on laptop
-
-8) Extract VGA BLOB from the x230-default-12mb.rom file
-   save the file in the coreboot/blobs directory
-   (./coreboot/3rdparty/blobs/mainboard/lenovo/x230/pci8086,0166.rom)
-
-9) Build Coreboot Toolchain
-
-10) Compile ifdtool located in the coreboot/utils directory
-
-11) Extract BLOBS from x230-default-12mb.rom using ifdtool
-    save the files in the coreboot/blobs directory
-    (./coreboot/3rdparty/blobs/mainboard/lenovo/x230/descriptor.bin)
-    (./coreboot/3rdparty/blobs/mainboard/lenovo/x230/me.bin)
-    (./coreboot/3rdparty/blobs/mainboard/lenovo/x230/gbe.bin)
-
-11b) [Optionally] Use ME_Cleaner on me.bin file )
-     (also it seems that ME_Cleaner is included in Coreboot:
-     Coreboot nconfig:
-     Chipset > Add Intel descriptor.bin file > Add Intel ME/TXE firmware
-     --> Strip down the Intel ME/TXE firmware )
-     I've choosen to leave the me.bin as is until everything is working.
-
-12) Configure Coreboot (make nconfig)
-    choose parameters/features and add the 4 binary blobs (step 8 and 11)
-
-13) build coreboot image
-    (./coreboot/build/coreboot.rom)
-
-14) Split coreboot.rom into two separate files to flash them to your 2 chips
-    (x230-coreboot-8mb.rom and x230-coreboot-4mb.rom)
-
-15) copy both files to your Raspberry Pi
-
---- on your Raspberry pi ---
-
-16) flash both files using flashrom again
-
-17) Reboot target laptop
-
-18) should boot up with coreboot.
-
-
+If you have comments or need help, feel free to contact the contributors of this howto:
+- https://github.com/one7two99
+- ...