RAK811 is EOL and no longer supported.

This example is based on a 2018 version of Keil and does not work on newer Keil versions.

If you like RAKwireless Stamp Modules, consider to switch to our latest RAK3172 stamp module.

RAK811 BreakBoard (For RAK811 TrackerBoard and RAK811 SensorNodeBoard)

chip： RAK811 + GPS + MEMS + charge battery

Support CoIDE/Keil5

Base on semtech LoRaWAN1.0.2

The document please go to : http://www.rakwireless.com/en/download

Software version V1.1.3

Update record:

1. Add the AT command, the command list is shown below;

2. Modify the time of sending data, and modify it to send a packet of data for 60s;

3. Integrate all frequency bands, support band switching, and switch frequency bands by AT command;

   AT command list:
   at+region=EU868/US915/AS923/AU915/IN865/KR920 // Set device region

   at+dev_eui=xxxxxxxxxxxxxxxx // Set device dev_eui
   at+app_eui=xxxxxxxxxxxxxxxx // Set device app_eui
   at+app_key=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx // Set device app_key

   at+dev_addr=xxxxxxxx // Set device dev_addr
   at+nwks_key=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx // Set device nwks_key
   at+apps_key=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx // Set device apps_key

   at+join_mode=otaa/abp // Set the device to join otaa or abp \

   (Note:Please set the region first, then set the join method.)
   After the parameter setting is completed, reset the device enable parameter.