Fix display string length for M117 / Status messages

Constants.h

@@ -0,0 +1,137 @@
+/*
+    This file is part of the Repetier-Firmware for RF devices from Conrad Electronic SE.
+
+    Repetier-Firmware is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    Repetier-Firmware is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with Repetier-Firmware.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#ifndef CONSTANTS_H
+#define CONSTANTS_H
+
+
+#define REPETIER_VERSION                    "RF.01.37i3.Mod"
+#define UI_PRINTER_COMPANY                  "Conrad SE"
+#define UI_VERSION_STRING                   "V " REPETIER_VERSION
+
+
+// ##########################################################################################
+// ##    basic definitions
+// ##########################################################################################
+
+#define DEVICE_TYPE_RF1000                  13
+#define DEVICE_TYPE_RF2000                  14
+
+#define OPERATING_MODE_PRINT                1   // the firmware works in mode "print"
+#define OPERATING_MODE_MILL                 2   // the firmware works in mode "mill"
+
+#define HOTEND_TYPE_1                       1   // hotend V1 + messing ring
+#define HOTEND_TYPE_V1                      2   // hotend V1
+#define HOTEND_TYPE_V2_SINGLE               3   // hotend V2 for single extruder
+#define HOTEND_TYPE_V2_DUAL                 4   // hotend V2 for dual extruder
+
+#define MILLER_TYPE_ONE_TRACK               1   // one track in x- and y-direction
+#define MILLER_TYPE_TWO_TRACKS              2   // two tracks in x- and y-direction
+
+#define ENDSTOP_TYPE_SINGLE                 1   // there is only one endstop attached (either the min- or the max-endstop)
+#define ENDSTOP_TYPE_CIRCUIT                2   // the min- and max-endstops are attached in a single circuit
+
+#define ENDSTOP_NOT_HIT                     0
+#define ENDSTOP_IS_HIT                      1
+#define ENDSTOP_WAS_HIT                     2
+
+#define X_AXIS                              0
+#define Y_AXIS                              1
+#define Z_AXIS                              2
+#define E_AXIS                              3
+#define VIRTUAL_AXIS                        4
+
+#define HOME_ORDER_XYZ                      1
+#define HOME_ORDER_XZY                      2
+#define HOME_ORDER_YXZ                      3
+#define HOME_ORDER_YZX                      4
+#define HOME_ORDER_ZXY                      5
+#define HOME_ORDER_ZYX                      6
+
+#define MENU_MODE_SD_MOUNTED                1
+#define MENU_MODE_SD_PRINTING               2
+#define MENU_MODE_SD_PAUSED                 4
+#define MENU_MODE_FAN_RUNNING               8
+#define MENU_MODE_PRINTING                  16
+#define MENU_MODE_PRINTER                   32  // we have to show the printer menu
+#define MENU_MODE_MILLER                    64  // we have to show the miller menu
+
+#define IGNORE_COORDINATE                   99999
+
+#define TASK_NO_TASK                        0
+#define TASK_ENABLE_Z_COMPENSATION          1
+#define TASK_DISABLE_Z_COMPENSATION         2
+#define TASK_PAUSE_PRINT                    4
+#define TASK_PAUSE_PRINT_AND_MOVE           5
+#define TASK_MOVE_FROM_BUTTON               10
+
+#define PAUSE_STATUS_NONE                   0   // we are not paused at the moment
+#define PAUSE_STATUS_WAIT_FOR_QUEUE_MOVE    1   // we are waiting until the last queue move is finished
+#define PAUSE_STATUS_PREPARE_PAUSE_1        2   // we are going to pause the print (= moving to the pause position)
+#define PAUSE_STATUS_PREPARE_PAUSE_2        3   // we are going to pause the print (= moving to the pause position)
+#define PAUSE_STATUS_PREPARE_PAUSE_3        4   // we are going to pause the print (= moving to the pause position)
+#define PAUSE_STATUS_PAUSED                 5   // we have paused the print (= pause position reached)
+#define PAUSE_STATUS_PREPARE_CONTINUE_1     6   // we are going to continue the print (= moving to the continue position)
+#define PAUSE_STATUS_PREPARE_CONTINUE_2     7   // we are going to continue the print (= moving to the continue position)
+
+#define PAUSE_MODE_NONE                     0   // we are not paused at the moment
+#define PAUSE_MODE_PAUSED                   1   // stopp at the last printing position
+#define PAUSE_MODE_PAUSED_AND_MOVED         2   // move away from the last printing position
+
+#define RGB_MODE_OFF                        0
+#define RGB_MODE_WHITE                      1
+#define RGB_MODE_AUTOMATIC                  2
+#define RGB_MODE_MANUAL                     3
+
+#define RGB_STATUS_NOT_AUTOMATIC            0
+#define RGB_STATUS_AUTOMATIC                1
+#define RGB_STATUS_PRINTING                 11
+#define RGB_STATUS_HEATING                  12
+#define RGB_STATUS_COOLING                  13
+#define RGB_STATUS_IDLE                     14
+#define RGB_STATUS_COLOR_CHANGE             15
+
+#define MOVE_MODE_SINGLE_STEPS              1
+#define MOVE_MODE_SINGLE_MOVE               2
+#define MOVE_MODE_1_MM                      3
+#define MOVE_MODE_10_MM                     4
+#define MOVE_MODE_50_MM                     5
+
+#define HEAT_BED_SCAN_MODE_PLA              1
+#define HEAT_BED_SCAN_MODE_ABS              2
+
+#define Z_VALUE_MODE_Z_MIN                  1   // show the z-distance to z-min (print)
+#define Z_VALUE_MODE_Z_ORIGIN               1   // show the z-distance to the z-origin (mill)
+#define Z_VALUE_MODE_SURFACE                2   // show the z-distance to the surface of the heat bed (print) or work part (mill)
+
+#define STOP_BECAUSE_OF_Z_MIN               1
+#define STOP_BECAUSE_OF_Z_BLOCK             2
+
+
+// ##########################################################################################
+// ##    data types
+// ##########################################################################################
+
+#define uint                                uint16_t
+#define uint8                               uint8_t
+#define int8                                int8_t
+#define uint32                              uint32_t
+#define int32                               int32_t
+
+
+#endif // CONSTANTS_H