Treatlife 3-way wall switches

[billy27607]

Treatlife makes 3-way wall switches with a unique characteristic. There is a power sensor that tells you whether the load is on or not. This allows the switch to work with standard dumb 3-way switches on the other end of the traveler.

The module is a tywe3s module. There are a number of posts with flashing instructions. I was not able to use the tuya connect approach, but flashed it using a serial connection. If you have a 3D printer there are jigs for flashing these on Thingiverse.

The code that I am posting works with all of the switch functionality but the "white" light that usually goes opposite of power to the load. My house does not tolerate a bunch of little lights everywhere.

{ "c":{ "l":5, "I":1, "b":[{"g":13,"t":5}] }, "a":[{ "t":1, "s":5, "0":{"m":[[2,4]]}, "1":{"m":[[2,4]]}, "b":[{"g":13}], "g0":[{"g":14,"t":1}], "g1":[{"g":14,"t":0}], "es":[{ "t": 1, "s": 5, "h": 2, "0":{"r":[{"g":12,"v":0}]}, "1":{"r":[{"g":12,"v":1}]} }] }] }