This frame mounts the screen upside down to allow the brightness adjustment knob to be accessed.
You will need to rotate the display and touchscreen in your Raspberry Pi config.
Use either one of the following frames:
45 Degree Mount by CannedBass
30 Degree Mount by sttts
You will need the following hardware:
- 4x M3 x 5 x 4mm Heatset Inserts (As used in a Voron)
- 4x M3 x 8mm (Frame to Mount)
- 4x M2.5 x 8mm (Frame to Display)
Print with standard Voron settings if using ABS.
This display frame/cover is a derivative of the cover designed originally by sttts.