Dupplicating an item in cura, for each layers, the first infill is slower than the others #4
Comments
A possible fix for the issue I have open "Dupplicating an item in cura, for each layers, the first infill is slower than the others" : RomRider#4
|
The extract of the gcode with the fix proposition. Seems to be good. I have not tried to print using the gcode generated using FastGyroidInfill.py with the fix yet. 22848-G0 X133.38 Y93.288 26686-G0 F9000 X132.461 Y13.199 26740-G1 X132.468 Y13.1 E3488.20652 30574-G0 F9000 X136.759 Y13.242 30628-G1 X136.729 Y13.147 E3579.83273 30721-G0 F9000 X167.108 Y113.835 31089-G1 X167.562 Y115.264 E3587.80627 31104-G0 X165.923 Y135.267 31185-G0 F9000 X167.353 Y134.817 31556-G1 X167.7 Y136.277 E3595.71863 31571-G0 X169.05 Y155.533 31656-G0 F9000 X167.565 Y155.874 32024-G1 X168.265 Y157.239 E3603.67248 32048-G0 X169.801 Y110.548 32135-G0 X166.364 Y92.941 32521-G0 X133.38 Y93.291 |
Hi,
First, thank you for your work !
I'm encountering an issue.
In cura, I have inserted a stl and I have duplicated it. I inserted another stl and I multiplied it by 3.
When printing, I have noticed that the first infill was slower than the others
In the generated gcode I have seen that for each layer, the first _USE_INFILL_SQV is followed by _USE_NORMAL_SQV 2 lines lower.
Bellow an extract of the gcode file for the Layer 4 (can be read like that LineNumberInTheGCodeFile TheLineContent)
22849-G0 X133.38 Y93.288
22850-G0 X111.797 Y13.815
22851-;TIME_ELAPSED:1491.242617
22852:;LAYER:4
22853-;TYPE:FILL
22854:_USE_INFILL_SQV
22855:;MESH:Spool_holder_body.stl
22856:_USE_NORMAL_SQV
22857-G1 F1500 E3396.51827
22858-G1 F10800 X111.879 Y13.755 E3396.52165
22859-G1 X112.28 Y13.569 E3396.53635
26741-G1 X132.468 Y13.1 E3488.21096
26742-G0 F9000 X132.437 Y13.5
26743-G1 F1500 E3481.71096
26744:;MESH:Spool_holder_body.stl(1)
26745-G0 F9000 X133.38 Y15.08
26746-G0 X136.12 Y15.08
26747-G0 X136.26 Y15.08
26748-;TYPE:FILL
26749:_USE_INFILL_SQV
26750-G1 F1500 E3488.21096
26751-G1 F10800 X136.34 Y15.016 E3488.21437
26752-G1 X136.741 Y14.5 E3488.23611
30575-G0 F9000 X136.759 Y13.242
30576-G0 X136.603 Y12.762
30577-;TYPE:WALL-OUTER
30578:_USE_NORMAL_SQV
30579-G1 F4500 X137.002 Y12.7 E3547.86313
30580-G1 X156.998 Y12.7 E3548.5282
30581-G1 X157.399 Y12.763 E3548.5417
30629-G1 X136.729 Y13.147 E3579.83717
30630-G0 F9000 X136.851 Y13.534
30631-G1 F1500 E3573.33717
30632:;MESH:6004_Spool_holder_bearing_center_rod.stl(3)
30633-G0 F9000 X157.88 Y113.638
30634-G0 X159.165 Y113.638
30635-G0 X164.337 Y113.606
30636-G0 X165.236 Y114.566
30637-G0 X168.16 Y113.638
30638-;TYPE:FILL
30639:_USE_INFILL_SQV
30640-G1 F1500 E3579.83717
30641-G1 F10800 X168.019 Y113.819 E3579.8448
30642-G1 X167.618 Y114.267 E3579.8648
30722-G0 F9000 X167.108 Y113.835
30723-G0 X166.963 Y113.357
30724-;TYPE:WALL-OUTER
30725:_USE_NORMAL_SQV
30726-G1 F4500 X167.456 Y113.217 E3580.80788
30727-G1 X167.973 Y113.101 E3580.8255
30728-G1 X168.494 Y113.014 E3580.84307
31089-G1 X167.562 Y115.263 E3587.81074
31090-G0 F9000 X167.444 Y114.881
31091-G1 F1500 E3581.31074
31092:;MESH:6004_Spool_holder_bearing_center_rod.stl(2)
31093-G0 F9000 X164.943 Y116.639
31094-G0 X163.894 Y117.697
31095-G0 X163.068 Y118.938
31104-G0 X165.929 Y135.265
31105-G0 X165.244 Y135.801
31106-;TYPE:FILL
31107:_USE_INFILL_SQV
31108-G1 F1500 E3587.81074
31109-G1 F10800 X165.613 Y136.275 E3587.83072
31110-G1 X166.014 Y136.723 E3587.85071
31185-G0 F9000 X167.353 Y134.817
31186-G0 X167.227 Y134.333
31187-;TYPE:WALL-OUTER
31188:_USE_NORMAL_SQV
31189-G1 F4500 X167.749 Y134.2 E3588.72099
31190-G1 X168.268 Y134.101 E3588.73856
31191-G1 X168.798 Y134.029 E3588.75635
31556-G1 X167.7 Y136.277 E3595.72302
31557-G0 F9000 X167.588 Y135.894
31558-G1 F1500 E3589.22302
31559:;MESH:6004_Spool_holder_bearing_center_rod.stl
31560-G0 F9000 X165.06 Y137.609
31561-G0 X163.993 Y138.65
31562-G0 X163.148 Y139.877
31571-G0 X169.05 Y155.533
31572-G0 X168.779 Y155.706
31573-;TYPE:FILL
31574:_USE_INFILL_SQV
31575-G1 F1500 E3595.72302
31576-G1 F10800 X168.42 Y156.168 E3595.74248
31577-G1 X168.019 Y156.489 E3595.75956
31656-G0 F9000 X167.565 Y155.874
31657-G0 X167.44 Y155.377
31658-;TYPE:WALL-OUTER
31659:_USE_NORMAL_SQV
31660-G1 F4500 X167.957 Y155.261 E3596.67458
31661-G1 X168.478 Y155.174 E3596.69215
31662-G1 X169.005 Y155.116 E3596.70978
32024-G1 X168.265 Y157.239 E3603.67687
32025-G0 F9000 X168.185 Y156.848
32026-G1 F1500 E3597.17687
32027:;MESH:6004_Spool_holder_bearing_center_rod.stl(1)
32028-G0 F9000 X169.05 Y155.533
32029-G0 X168.961 Y154.252
32030-G0 X165.899 Y153.267
32048-G0 X169.801 Y110.548
32049-G0 X169.143 Y110.381
32050-;TYPE:FILL
32051:_USE_INFILL_SQV
32052-G1 F1500 E3603.67687
32053-G1 F10800 X169.222 Y110.292 E3603.68083
32054-G1 X169.623 Y109.995 E3603.69743
32135-G0 X166.364 Y92.941
32136-G0 X166.184 Y92.475
32137-;TYPE:WALL-OUTER
32138:_USE_NORMAL_SQV
32139-G1 F4500 X166.694 Y92.284 E3604.47483
32140-G1 X167.191 Y92.13 E3604.49214
32141-G1 X167.713 Y91.997 E3604.51005
32521-G0 X133.38 Y93.291
32522-G0 X111.803 Y13.78
32523-;TIME_ELAPSED:1595.761266
32524:;LAYER:5
32525-;TYPE:FILL
32526:_USE_INFILL_SQV
32527:;MESH:Spool_holder_body.stl
32528:_USE_NORMAL_SQV
32529-G1 F1500 E3611.47661
32530-G1 F10800 X111.879 Y13.737 E3611.47952
32531-G1 X112.28 Y13.611 E3611.4935
AV_6004_Spool_holder_bearing_center_rod.gcode.zip
The text was updated successfully, but these errors were encountered: