RaspberryPi Surveillance using v4l2rtspserver with resin.io

Getting started

• Sign up on resin.io.
• Create an application.
• Set the following variables in Device Configuration section of the created application:
  • RESIN_HOST_CONFIG_gpu_mem=128
  • RESIN_HOST_CONFIG_start_x=1
• Provision a device which has a camera module attached to the CSI port.
• Clone this repository to a local workspace.
• Add the resin git remote.
• git push resin master.

Configuration

The source code comes with sensible default values for most of the variables but they can be customised using Environment Variables per application or per device:

• CAMERA_ROTATE : angle to rotate the camera
• RTSP_PORT : server port
• FRAMERATE : capture framerate
• V4L2_W : capture width
• V4L2_H : capture height

Testing

You can test using a client like vlc. For example run vlc -> Media -> Open Network Stream and play rtsp://192.168.1.100:8555/unicast.

License

Apache 2.0, see LICENSE.