S0-counter is a microcontroller project to analyze S0 impulses that modern power, water and gas meters can output. It supports multiple channels, and saves its state in non-volatile FRAM, which makes it persistent across power cycles.
After the signal has been analyzed a parsable string is being output, which can then be used by other projects, e.g. volkszaehler, in order to get nice looking graphs and long-term statistics.
This project is still under development and should be considered non-stable.
These are some of the highlights, which make this project unique:
-
Multiple channels: Up to 48 channels are supported, making this the most extensive S0 signal analyzer available.
-
Configuration: Each channel has its own configuration. While the defaults should be sane enough in most cases, signal timings and initial values can be (re)set at any point in time rather easily by means of a documented UART protocol.
-
Open Source: Both software and hardware are freely available and Open Source making it easy and possible to change the project.
You can find the schematics in its own repository. The project is based upon the AVR family of microcontrollers. Currently the prototype is being developed for the ATmega328p, but it will be replaced by a bigger brother later on.
In order to build the source code, a current toolchain for Atmel AVR microcontrollers is needed. The code itself is tested and developed with the latest version of avr-gcc, avr-binutils and avr-libc in mind. Other toolchains or older versions might work just fine, but are not fully tested.
The source code itself is documented heavily using Doxygen. An appropriate
Doxyfile is provided along with the sources and can be found within the doc/
directory. It can be used to generate a HTML and PDF reference. Use make's
doc target in order to generate the docs from the sources.
There are various options, which influence the building process and hence the
resulting binary. Various options and debugging aids can be enabled in this
way. The options can be found within src/config.h, along with comments about
their actual meaning and possible values.
There is a Makefile provided with the project. The source code can be simply
build by invoking make with the default target.
The program target of the Makefile can be used to flash the resulting binary
to the microcontroller using avrdude.
Make also sure to set the fuse values correctly, i.e.:
- lfuse:
0xE2 - hfuse:
0xD9 - efuse:
0xFF
The source code is maintained using git. The project along with its repos lives over at github.com. Contributions of any kind are highly welcome, preferably as pull requests. If you are new to git and are not yet familiar with the process, refer to this for a detailed description.
In case you are looking for something to work on, you probably want to take a
look at the TODO file within the projects root directory or the
issue tracker of this project.
PayPal:
Bitcoin: 14kgbYKvtjdH2sNA5iq7jjTmZFNFeWxydo
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.