SPECTRA V.1 #2
dhanushscience
announced in
Announcements
Replies: 0 comments
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
SPECTRA V.1
This is the first release of the SPECTRA project by SPARK TECH INDUSTRIES. It includes code for two boards, designed by SPARK TECH INDUSTRIES:
Board 1: The Board 1 program starts a countdown from 99 seconds on a seven-segment display using the "SevSeg.h" library. Once the countdown is over, the digital pin 13 is made high for 3 seconds for heating of nickel-chromium wire.
Board 2: The Board 2 program uses multiple libraries including "SD.h", "HX711_ADC.h", "SPI.h", and "Wire.h". The SD card CS pin is connected to Arduino D10 pin, and for HX711, DOUT is connected to D5, and SCK pin is connected to D6. The program has a baud rate of 9600, and the calibration value should be written in the "calibrationValue" section as mentioned in the program. The program starts up the load cell and starts to read the load cell value in grams. Finally, it writes the data to the SD card while simultaneously
reading the data
The code for the project is available in the main branch of the repository, and is licensed under the MIT license. However, please note that the code is not completely refined, so there may be some errors. If you encounter any issues, please report them on the issues page of this repository.
To download the code, simply clone the repository or download the zip file. If you have any questions or feedback, feel free to reach out to us at thesparktech.xyz@gmail.com.
Thank you for your interest in the SPECTRA project!
This discussion was created from the release SPECTRA V.1.
Beta Was this translation helpful? Give feedback.
All reactions