Using Raspberry PI with SaraKIT, AS5048A Encoder with Brushless Motor Controllers (BLDC)
This demo shows how to use one of the encoders (e.g. AS5048A, AS5600) with SaraKIT and Raspberry PI CM4 to control another gimbal in a synchronous manner. By turning the gimbal in which the encoder is, I rotate the second gimbal in the same way. Of course, you can use the AS5048A decoder itself by connecting it via PWM to one of the two connectors on the SaraKIT board.
git clone https://github.com/SaraEye/SaraKIT-AS5048A-AS5600-encoder-Raspberry-Pi EncoderDemo
cd EncoderDemo
make
./gimbals
Attention, BLDC motors get very hot, do not leave them running at too high power - there is a risk of burns and fire!
This is exactly that part of the movie: YouTube Link
A Guide to Using BLDC Motors (Gimbals) with SaraKIT: A Comparison of Stepper Motors, Servos, and BLDC Motors
YouTube Video about SaraKIT and BLDC driver
Example of use, demonstration of the speed and power of BLDC motors
Website: https://SaraAI.com
Project Page: https://SaraKIT.SaraAI.com