Update README.md

README.md

@@ -8,37 +8,37 @@ SHT product line.
 ```
 
 ## Repository content
-* embedded-common (submodule repository for common embedded driver stuff)
-* sht-common (SHTxx related)
+* embedded-common (submodule repository for the common embedded driver HAL)
+* sht-common (common files for all SHTxx drivers)
 * sht3x (SHT3x driver related)
-* shtc1 (SHTC1/SHTW1/SHTW2 driver related)
+* shtc1 (SHTC3/SHTC1/SHTW1/SHTW2 driver related)
 
 ## Collecting resources
 ```
 make release
 ```
-This will create a release folder
-with the necessary driver files in it, including a Makefile. That way, you have
-just ONE folder with all the sources ready to build your driver for your
-platform.
+This will create the `release` folder with the necessary driver files in it,
+including a Makefile. That way, you have just ONE folder with all the sources
+ready to build your driver for your platform.
 
 ## Files to adjust (from embedded-common)
 You only need to touch the following files:
 
 * `sensirion_arch_config.h` (architecture specifics, you need to specify
 the integer sizes)
 
-and depending on your i2c implementation one of the following:
+and depending on your i2c implementation either of the following:
 
-* `sensirion_hw_i2c_implementation.c` (functions for hardware i2c
-communication if your platform supports that)
-* `sensirion_sw_i2c_implementation.c` (functions for software i2c
-communication via GPIOs)
+* `embedded-common/hw_i2c/sensirion_hw_i2c_implementation.c`
+  functions for hardware i2c communication if your platform supports that
+* `embedded-common/sw_i2c/sensirion_sw_i2c_implementation.c`
+  functions for software i2c communication via GPIOs
 
 ## Building the driver
 1. Adjust sensirion\_arch\_config.h if you don't have the `<stdint.h>` header
    file available
 2. Implement necessary functions in one of the `*_implementation.c` files
+   described above
 3. make
 
 ---