v2ray.sh

#!/bin/bash

red='\e[91m'
green='\e[92m'
yellow='\e[93m'
magenta='\e[95m'
cyan='\e[96m'
none='\e[0m'

# Root
[[ $(id -u) != 0 ]] && echo -e " 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}" && exit 1

_version="v1.41"

cmd="apt-get"

sys_bit=$(uname -m)

if [[ $sys_bit == "i386" || $sys_bit == "i686" ]]; then
	v2ray_bit="32"
elif [[ $sys_bit == "x86_64" ]]; then
	v2ray_bit="64"
else
	echo -e " 哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none}" && exit 1
fi

# 笨笨的检测方法
if [[ -f /usr/bin/apt-get ]] || [[ -f /usr/bin/yum && -f /bin/systemctl ]]; then

	if [[ -f /usr/bin/yum ]]; then

		cmd="yum"

	fi
	if [[ -f /bin/systemctl ]]; then
		systemd=true
	fi

else

	echo -e " 哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none}" && exit 1

fi

backup="/etc/v2ray/233blog_v2ray_backup.txt"

if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup ]]; then

	v2ray_transport=$(sed -n '17p' $backup)
	v2ray_port=$(sed -n '19p' $backup)
	v2ray_id=$(sed -n '21p' $backup)
	v2ray_dynamicPort_start=$(sed -n '23p' $backup)
	v2ray_dynamicPort_end=$(sed -n '25p' $backup)
	domain=$(sed -n '27p' $backup)
	caddy_status=$(sed -n '29p' $backup)
	shadowsocks_status=$(sed -n '31p' $backup)
	ssport=$(sed -n '33p' $backup)
	sspass=$(sed -n '35p' $backup)
	ssciphers=$(sed -n '37p' $backup)
	blocked_ad_status=$(sed -n '39p' $backup)

	v2ray_ver=$(/usr/bin/v2ray/v2ray -version | head -n 1 | cut -d " " -f2)

else
	echo -e " 哎呀哎呀…… ${red}出错咯...请重新安装V2Ray${none} ${yellow}~(^_^) ${none}" && exit 1
fi

if [[ $caddy_status == "true" ]]; then
	caddy_installed=true
fi
if [[ $shadowsocks_status == "true" ]]; then
	shadowsocks=true
fi
if [[ $blocked_ad_status == "true" ]]; then
	is_blocked_ad=true
fi
if [[ $v2ray_transport -ge 9 ]]; then
	dynamicPort=true
	port_range="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}"
fi

uuid=$(cat /proc/sys/kernel/random/uuid)
old_id="23332333-2333-2333-2333-233boy233boy"
v2ray_server_config="/etc/v2ray/config.json"
v2ray_client_config="/etc/v2ray/233blog_v2ray_config.json"
v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}')
caddy_pid=$(pgrep "caddy")

if [ $v2ray_pid ]; then
	v2ray_status="$green正在运行$none"
else
	v2ray_status="$red未在运行$none"
fi

transport=(
	TCP
	TCP_HTTP
	WebSocket
	"WebSocket + TLS"
	mKCP
	mKCP_utp
	mKCP_srtp
	mKCP_wechat-video
	TCP_dynamicPort
	TCP_HTTP_dynamicPort
	WebSocket_dynamicPort
	mKCP_dynamicPort
	mKCP_utp_dynamicPort
	mKCP_srtp_dynamicPort
	mKCP_wechat-video_dynamicPort
)

ciphers=(
	aes-128-cfb
	aes-256-cfb
	chacha20
	chacha20-ietf
	aes-128-gcm
	aes-256-gcm
	chacha20-ietf-poly1305
)

get_transport_args() {
	header="none"
	host=""
	case $v2ray_transport in
	1 | 9)
		net="tcp"
		network="tcp"
		obfs="none"
		;;
	2 | 10)
		net="tcp"
		network="tcp"
		header="http"
		host="www.baidu.com"
		obfs="http"
		;;
	3 | 4 | 11)
		net="ws"
		network="ws (WebSocket)"
		obfs="websocket"
		;;
	5 | 12)
		net="kcp"
		network="kcp"
		;;
	6 | 13)
		net="kcp"
		network="kcp"
		header="utp"
		;;
	7 | 14)
		net="kcp"
		network="kcp"
		header="srtp"
		;;
	8 | 15)
		net="kcp"
		network="kcp"
		header="wechat-video"
		;;
	esac
}
create_vmess_URL_config() {

	[[ -z $net ]] && get_transport_args

	if [[ $v2ray_transport == "4" ]]; then
		cat >/etc/v2ray/vmess_qr.json <<-EOF
		{
			"ps": "233blog_v2ray_${domain}",
			"add": "${domain}",
			"port": "443",
			"id": "${v2ray_id}",
			"aid": "233",
			"net": "ws",
			"type": "none",
			"host": "",
			"tls": "tls"
		}
		EOF
	else
		[[ -z $ip ]] && get_ip
		cat >/etc/v2ray/vmess_qr.json <<-EOF
		{
			"ps": "233blog_v2ray_${ip}",
			"add": "${ip}",
			"port": "${v2ray_port}",
			"id": "${v2ray_id}",
			"aid": "233",
			"net": "${net}",
			"type": "${header}",
			"host": "${host}",
			"tls": ""
		}
		EOF
	fi
}
view_v2ray_config_info() {

	get_transport_args

	echo
	echo
	echo "---------- V2Ray 配置信息 -------------"
	if [[ $v2ray_transport == "4" ]]; then
		if [[ ! $caddy_installed ]]; then
			echo
			echo -e " $red警告！$none$yellow请自行配置 TLS...教程: https://233blog.com/post/19/$none"
		fi
		echo
		echo -e "$yellow 地址 (Address) = $cyan${domain}$none"
		echo
		echo -e "$yellow 端口 (Port) = ${cyan}443${none}"
		echo
		echo -e "$yellow 用户ID (User ID / UUID) = $cyan${v2ray_id}$none"
		echo
		echo -e "$yellow 额外ID (Alter Id) = ${cyan}233${none}"
		echo
		echo -e "$yellow 传输协议 (Network) = ${cyan}${network}$none"
		echo
		echo -e "$yellow 伪装类型 (header type) = ${cyan}${header}$none"
		echo
		echo -e "$yellow TLS (Enable TLS) = ${cyan}打开$none"
		echo
		echo -e " 请将 Obfs 设置为 $obfs ...并忽略 传输协议... (如果你使用 Pepi / ShadowRay) "
		echo
		if [[ $is_blocked_ad ]]; then
			echo " 备注: 广告拦截已开启.."
			echo
		fi
	else
		[[ -z $ip ]] && get_ip
		echo
		echo -e "$yellow 地址 (Address) = $cyan${ip}$none"
		echo
		echo -e "$yellow 端口 (Port) = $cyan$v2ray_port$none"
		echo
		echo -e "$yellow 用户ID (User ID / UUID) = $cyan${v2ray_id}$none"
		echo
		echo -e "$yellow 额外ID (Alter Id) = ${cyan}233${none}"
		echo
		echo -e "$yellow 传输协议 (Network) = ${cyan}${network}$none"
		echo
		echo -e "$yellow 伪装类型 (header type) = ${cyan}${header}$none"
		echo
		if [[ $obfs ]]; then
			echo -e " 请将 Obfs 设置为 $obfs ...并忽略 传输协议... (如果你使用 Pepi / ShadowRay) "
			echo
		else
			echo -e " 帅帅的提示...此 V2Ray 配置不支持 Pepi / ShadowRay"
			echo
		fi
		if [[ $v2ray_transport -ge 9 && $is_blocked_ad ]]; then
			echo " 备注: 动态端口已启用...广告拦截已开启..."
			echo
		elif [[ $v2ray_transport -ge 9 ]]; then
			echo " 备注: 动态端口已启用..."
			echo
		elif [[ $is_blocked_ad ]]; then
			echo " 备注: 广告拦截已开启.."
			echo
		fi
	fi
	echo "---------- END -------------"
	echo
	echo "V2Ray 客户端使用教程: https://233blog.com/post/20/"
	echo
}
get_shadowsocks_config() {
	if [[ $shadowsocks ]]; then

		while :; do
			echo
			echo -e "$yellow 1. $none查看 Shadowsocks 配置信息"
			echo
			echo -e "$yellow 2. $none生成二维码链接"
			echo
			read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" _opt
			if [[ -z $_opt ]]; then
				error
			else
				case $_opt in
				1)
					view_shadowsocks_config_info
					break
					;;
				2)
					get_shadowsocks_config_qr_link
					break
					;;
				*)
					error
					;;
				esac
			fi

		done
	else
		shadowsocks_config
	fi
}
view_shadowsocks_config_info() {
	if [[ $shadowsocks ]]; then
		get_ip
		local ss="ss://$(echo -n "${ssciphers}:${sspass}@${ip}:${ssport}" | base64)#233blog_ss_${ip}"
		echo
		echo
		echo "---------- Shadowsocks 配置信息 -------------"
		echo
		echo -e "$yellow 服务器地址 = $cyan${ip}$none"
		echo
		echo -e "$yellow 服务器端口 = $cyan$ssport$none"
		echo
		echo -e "$yellow 密码 = $cyan$sspass$none"
		echo
		echo -e "$yellow 加密协议 = $cyan${ssciphers}$none"
		echo
		echo -e "$yellow SS 链接 = ${cyan}$ss$none"
		echo
		echo -e " 备注:$red Shadowsocks Win 4.0.6 $none客户端可能无法识别该 SS 链接"
		echo
	else
		shadowsocks_config
	fi
}
get_shadowsocks_config_qr_link() {
	if [[ $shadowsocks ]]; then
		echo
		echo -e "$green 正在生成链接.... 稍等片刻即可....$none"
		echo
		get_ip
		local ss="ss://$(echo -n "${ssciphers}:${sspass}@${ip}:${ssport}" | base64)#233blog_ss_${ip}"
		echo "${ss}" >/tmp/233blog_shadowsocks.txt
		cat /tmp/233blog_shadowsocks.txt | qrencode -s 50 -o /tmp/233blog_shadowsocks.png

		local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
		local link=$(curl -s --upload-file /tmp/233blog_shadowsocks.png "https://transfer.sh/${random}_233blog_shadowsocks.png")
		if [[ $link ]]; then
			echo
			echo "---------- Shadowsocks 二维码链接 -------------"
			echo
			echo -e "$yellow 链接 = $cyan$link$none"
			echo
			echo -e " 温馨提示...$red Shadowsocks Win 4.0.6 $none客户端可能无法识别该二维码"
			echo
			echo "备注...链接将在 14 天后失效"
			echo
			echo "提醒...请不要把链接分享出去...除非你有特别的理由...."
			echo
		else
			echo
			echo -e "$red 哎呀呀呀...出错咯...请重试$none"
			echo
		fi
		rm -rf /tmp/233blog_shadowsocks.png
		rm -rf /tmp/233blog_shadowsocks.txt
	else
		shadowsocks_config
	fi

}

get_shadowsocks_config_qr_ask() {
	echo
	while :; do
		echo -e "是否需要生成$yellow Shadowsocks 配置信息 $none二维码链接 [${magenta}Y/N$none]"
		read -p "$(echo -e "默认 [${magenta}N$none]:")" y_n
		[ -z $y_n ] && y_n="n"
		if [[ $y_n == [Yy] ]]; then
			get_shadowsocks_config_qr_link
			break
		elif [[ $y_n == [Nn] ]]; then
			break
		else
			error
		fi
	done

}
change_shadowsocks_config() {
	if [[ $shadowsocks ]]; then

		while :; do
			echo
			echo -e "$yellow 1. $none修改 Shadowsocks 端口"
			echo
			echo -e "$yellow 2. $none修改 Shadowsocks 密码"
			echo
			echo -e "$yellow 3. $none修改 Shadowsocks 加密协议"
			echo
			echo -e "$yellow 4. $none关闭 Shadowsocks"
			echo
			read -p "$(echo -e "请选择 [${magenta}1-4$none]:")" _opt
			if [[ -z $_opt ]]; then
				error
			else
				case $_opt in
				1)
					change_shadowsocks_port
					break
					;;
				2)
					change_shadowsocks_password
					break
					;;
				3)
					change_shadowsocks_ciphers
					break
					;;
				4)
					disable_shadowsocks
					break
					;;
				*)
					error
					;;
				esac
			fi

		done
	else

		shadowsocks_config
	fi
}
shadowsocks_config() {
	echo
	echo
	echo -e " $red大佬...你没有配置 Shadowsocks $none...不过现在想要配置的话也是可以的 ^_^"
	echo
	echo

	while :; do
		echo -e "是否配置 ${yellow}Shadowsocks${none} [${magenta}Y/N$none]"
		read -p "$(echo -e "(默认 [${magenta}N$none]):") " install_shadowsocks
		[[ -z "$install_shadowsocks" ]] && install_shadowsocks="n"
		if [[ "$install_shadowsocks" == [Yy] ]]; then
			echo
			new_shadowsocks=true
			shadowsocks_port_config
			shadowsocks_password_config
			shadowsocks_ciphers_config
			pause
			config
			clear
			shadowsocks=true
			ssport=$new_ssport
			sspass=$new_sspass
			ssciphers=$new_ssciphers
			view_shadowsocks_config_info
			get_shadowsocks_config_qr_ask
			break
		elif [[ "$install_shadowsocks" == [Nn] ]]; then
			echo
			echo -e " $green已取消配置 Shadowsocks ....$none"
			echo
			break
		else
			error
		fi

	done
}
shadowsocks_port_config() {
	while :; do
		echo -e "请输入 "$yellow"Shadowsocks"$none" 端口 ["$magenta"1-65535"$none"]，不能和 "$yellow"V2ray"$none" 端口相同"
		read -p "$(echo -e "(默认端口: ${magenta}6666$none):") " new_ssport
		[ -z "$new_ssport" ] && new_ssport="6666"
		case $new_ssport in
		$v2ray_port)
			echo
			echo -e " 不能和$cyan V2Ray 端口 $none一毛一样...."
			error
			;;
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | [1-6][0-5][0-5][0-3][0-5])
			if [[ $v2ray_transport == "4" && $new_ssport == "80" ]] || [[ $v2ray_transport == "4" && $new_ssport == "443" ]]; then
				echo
				echo -e "由于你选择了 "$green"WebSocket + TLS"$none" 传输协议."
				echo
				echo -e "所以不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口"
				error
			elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start == $new_ssport || $v2ray_dynamicPort_end == $new_ssport ]]; then
				local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}"
				echo
				echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none"
				error
			elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start -lt $new_ssport && $new_ssport -le $v2ray_dynamicPort_end ]]; then
				local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}"
				echo
				echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none"
				error
			else
				echo
				echo
				echo -e "$yellow Shadowsocks 端口 = $cyan$new_ssport$none"
				echo "----------------------------------------------------------------"
				echo
				break
			fi
			;;
		*)
			error
			;;
		esac

	done

}

shadowsocks_password_config() {

	while :; do
		echo -e "请输入 "$yellow"Shadowsocks"$none" 密码"
		read -p "$(echo -e "(默认密码: ${magenta}233blog.com$none)"): " new_sspass
		[ -z "$new_sspass" ] && new_sspass="233blog.com"
		case $new_sspass in
		*/*)
			echo
			echo -e " 由于这个脚本太辣鸡了..所以密码不能包括 $red/$none 这个符号.... "
			echo
			error
			;;
		*)
			echo
			echo
			echo -e "$yellow Shadowsocks 密码 = $cyan$new_sspass$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		esac

	done

}

shadowsocks_ciphers_config() {

	while :; do
		echo -e "请选择 "$yellow"Shadowsocks"$none" 加密协议 [${magenta}1-7$none]"
		for ((i = 1; i <= ${#ciphers[*]}; i++)); do
			ciphers_show="${ciphers[$i - 1]}"
			echo
			echo -e "$yellow $i. $none${ciphers_show}"
		done
		echo
		read -p "$(echo -e "(默认加密协议: ${magenta}${ciphers[6]}$none)"):" ssciphers_opt
		[ -z "$ssciphers_opt" ] && ssciphers_opt=7
		case $ssciphers_opt in
		[1-7])
			new_ssciphers=${ciphers[$ssciphers_opt - 1]}
			echo
			echo
			echo -e "$yellow Shadowsocks 加密协议 = $cyan${new_ssciphers}$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		*)
			error
			;;
		esac

	done
}

change_shadowsocks_port() {
	echo
	while :; do
		echo -e "请输入 "$yellow"Shadowsocks"$none" 端口 ["$magenta"1-65535"$none"]"
		read -p "$(echo -e "(当前端口: ${magenta}$ssport$none):") " new_ssport
		[ -z "$new_ssport" ] && error && continue
		case $new_ssport in
		$ssport)
			echo
			echo " 跟当前端口一毛一样....修改个鸡鸡哦"
			error
			;;
		$v2ray_port)
			echo
			echo -e " 不能和$cyan V2Ray 端口 $none一毛一样...."
			error
			;;
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | [1-6][0-5][0-5][0-3][0-5])
			if [[ $v2ray_transport == "4" && $new_ssport == "80" ]] || [[ $v2ray_transport == "4" && $new_ssport == "443" ]]; then
				echo
				echo -e "由于你选择了 "$green"WebSocket + TLS"$none" 传输协议."
				echo
				echo -e "所以不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口"
				error
			elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start == $new_ssport || $v2ray_dynamicPort_end == $new_ssport ]]; then
				local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}"
				echo
				echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none"
				error
			elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start -lt $new_ssport && $new_ssport -le $v2ray_dynamicPort_end ]]; then
				local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}"
				echo
				echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none"
				error
			else
				echo
				echo
				echo -e "$yellow Shadowsocks 端口 = $cyan$new_ssport$none"
				echo "----------------------------------------------------------------"
				echo
				pause
				sed -i "33s/$ssport/$new_ssport/" $backup
				del_port $ssport
				open_port $new_ssport
				ssport=$new_ssport
				config
				clear
				view_shadowsocks_config_info
				get_shadowsocks_config_qr_ask
				break
			fi
			;;
		*)
			error
			;;
		esac

	done
}
change_shadowsocks_password() {
	echo
	while :; do
		echo -e "请输入 "$yellow"Shadowsocks"$none" 密码"
		read -p "$(echo -e "(当前密码：${magenta}$sspass$none)"): " new_sspass
		[ -z "$new_sspass" ] && error && continue
		case $new_sspass in
		$sspass)
			echo
			echo " 跟当前密码一毛一样....修改个鸡鸡哦"
			error
			;;
		*/*)
			echo
			echo -e " 由于这个脚本太辣鸡了..所以密码不能包括 $red/$none 这个符号.... "
			echo
			error
			;;
		*)
			echo
			echo
			echo -e "$yellow Shadowsocks 密码 = $cyan$new_sspass$none"
			echo "----------------------------------------------------------------"
			echo
			pause
			sed -i "35s/$sspass/$new_sspass/" $backup
			sspass=$new_sspass
			config
			clear
			view_shadowsocks_config_info
			get_shadowsocks_config_qr_ask
			break
			;;
		esac

	done

}

change_shadowsocks_ciphers() {
	echo
	while :; do
		echo -e "请选择 "$yellow"Shadowsocks"$none" 加密协议 [${magenta}1-8$none]"
		for ((i = 1; i <= ${#ciphers[*]}; i++)); do
			ciphers_show="${ciphers[$i - 1]}"
			echo
			echo -e "$yellow $i. $none${ciphers_show}"
		done
		echo
		read -p "$(echo -e "(当前加密协议: ${magenta}${ssciphers}$none)"):" ssciphers_opt
		[ -z "$ssciphers_opt" ] && error && continue
		case $ssciphers_opt in
		[1-7])
			new_ssciphers=${ciphers[$ssciphers_opt - 1]}
			if [[ $new_ssciphers == $ssciphers ]]; then
				echo
				echo " 跟当前加密协议一毛一样....修改个鸡鸡哦"
				error && continue
			fi
			echo
			echo
			echo -e "$yellow Shadowsocks 加密协议 = $cyan${new_ssciphers}$none"
			echo "----------------------------------------------------------------"
			echo
			pause
			sed -i "37s/$ssciphers/$new_ssciphers/" $backup
			ssciphers=$new_ssciphers
			config
			clear
			view_shadowsocks_config_info
			get_shadowsocks_config_qr_ask
			break
			;;
		*)
			error
			;;
		esac

	done

}
disable_shadowsocks() {
	echo

	while :; do
		echo -e "是否关闭 ${yellow}Shadowsocks${none} [${magenta}Y/N$none]"
		read -p "$(echo -e "(默认 [${magenta}N$none]):") " y_n
		[[ -z "$y_n" ]] && y_n="n"
		if [[ "$y_n" == [Yy] ]]; then
			echo
			echo
			echo -e "$yellow 关闭 Shadowsocks = $cyan是$none"
			echo "----------------------------------------------------------------"
			echo
			pause
			sed -i "31s/true/false/" $backup
			del_port $ssport
			shadowsocks=''
			config
			# clear
			echo
			echo
			echo
			echo -e "$green Shadowsocks 已关闭...不过你也可以随时重新启用 Shadowsocks ...只要你喜欢$none"
			echo
			break
		elif [[ "$y_n" == [Nn] ]]; then
			echo
			echo -e " $green已取消关闭 Shadowsocks ....$none"
			echo
			break
		else
			error
		fi

	done
}
change_v2ray_config() {
	while :; do
		echo
		echo -e "$yellow 1. $none修改 V2Ray 端口"
		echo
		echo -e "$yellow 2. $none修改 V2Ray 传输协议"
		echo
		echo -e "$yellow 3. $none修改 V2Ray 动态端口(如果可以)"
		echo
		echo -e "$yellow 4. $none修改 用户ID"
		echo
		echo -e "$yellow 5. $none修改 TLS 域名(如果可以)"
		echo
		echo -e "$yellow 6. $none开启 / 关闭 广告拦截"
		echo
		read -p "$(echo -e "请选择 [${magenta}1-6$none]:")" _opt
		if [[ -z $_opt ]]; then
			error
		else
			case $_opt in
			1)
				change_v2ray_port
				break
				;;
			2)
				change_v2ray_transport
				break
				;;
			3)
				change_v2ray_dynamicport
				break
				;;
			4)
				change_v2ray_id
				break
				;;
			5)
				change_domain
				break
				;;
			6)
				blocked_hosts
				break
				;;
			*)
				error
				;;
			esac
		fi
	done
}
change_v2ray_port() {
	if [[ $v2ray_transport == 4 ]]; then
		echo
		echo -e " 由于你目前使用的是$yellow WebSocket + TLS $none传输协议...所以修不修改 V2Ray 端口没有什么不一样的"
		echo
		echo " 如果你想要使用其他端口...可以先修改 V2Ray 的传输协议..之后再修改 V2Ray 端口"
		echo
		change_v2ray_transport_ask
	else
		echo
		while :; do
			echo -e "请输入 "$yellow"V2Ray"$none" 端口 ["$magenta"1-65535"$none"]"
			read -p "$(echo -e "(当前端口: ${magenta}${v2ray_port}$none):")" v2ray_port_opt
			[[ -z $v2ray_port_opt ]] && error && continue
			case $v2ray_port_opt in
			$v2ray_port)
				echo
				echo " 哎呀...跟当前端口一毛一样呀...修改个鸡鸡哦"
				error
				;;
			[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | [1-6][0-5][0-5][0-3][0-5])
				if [[ $shadowsocks ]] && [[ $v2ray_port_opt == $ssport ]]; then
					echo
					echo -e " ...不能跟$cyan Shadowsocks 端口 $none一毛一样..."
					error
				elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start == $v2ray_port_opt || $v2ray_dynamicPort_end == $v2ray_port_opt ]]; then
					local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}"
					echo
					echo -e " 抱歉..此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none"
					error

				elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start -lt $v2ray_port_opt && $v2ray_port_opt -le $v2ray_dynamicPort_end ]]; then
					local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}"
					echo
					echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none"
					error
				else
					echo
					echo
					echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port_opt$none"
					echo "----------------------------------------------------------------"
					echo
					pause
					sed -i "19s/$v2ray_port/$v2ray_port_opt/" $backup
					del_port $v2ray_port
					open_port $v2ray_port_opt
					v2ray_port=$v2ray_port_opt
					config
					clear
					view_v2ray_config_info
					download_v2ray_config_ask
					break
				fi
				;;
			*)
				error
				;;
			esac

		done
	fi

}
download_v2ray_config_ask() {
	echo
	while :; do
		echo -e "是否需要 下载 V2Ray 配置 / 生成配置信息链接 / 生成二维码链接 [${magenta}Y/N$none]"
		read -p "$(echo -e "默认 [${magenta}N$none]:")" y_n
		[ -z $y_n ] && y_n="n"
		if [[ $y_n == [Yy] ]]; then
			download_v2ray_config
			break
		elif [[ $y_n == [Nn] ]]; then
			break
		else
			error
		fi
	done

}
change_v2ray_transport_ask() {
	echo
	while :; do
		echo -e "是否需要修改$yellow V2Ray $none传输协议 [${magenta}Y/N$none]"
		read -p "$(echo -e "默认 [${magenta}N$none]:")" y_n
		[ -z $y_n ] && break
		if [[ $y_n == [Yy] ]]; then
			change_v2ray_transport
			break
		elif [[ $y_n == [Nn] ]]; then
			break
		else
			error
		fi
	done
}
change_v2ray_transport() {
	echo
	while :; do
		echo -e "请选择 "$yellow"V2Ray"$none" 传输协议 [${magenta}1-15$none]"
		echo
		for ((i = 1; i <= ${#transport[*]}; i++)); do
			Stream="${transport[$i - 1]}"
			if [[ "$i" -le 9 ]]; then
				# echo
				echo -e "$yellow  $i. $none${Stream}"
			else
				# echo
				echo -e "$yellow $i. $none${Stream}"
			fi
		done
		echo
		echo "备注1: 含有 [dynamicPort] 的即启用动态端口.."
		echo "备注2: [utp | srtp | wechat-video] 分别为 伪装成 [BT下载 | 视频通话 | 微信视频通话]"
		echo
		read -p "$(echo -e "(当前传输协议: ${magenta}${transport[$v2ray_transport - 1]}$none)"):" v2ray_transport_opt
		if [ -z "$v2ray_transport_opt" ]; then
			error
		else
			case $v2ray_transport_opt in
			$v2ray_transport)
				echo
				echo " 哎呀...跟当前传输协议一毛一样呀...修改个鸡鸡哦"
				error
				;;
			4)
				if [[ $v2ray_port == "80" || $v2ray_port == "443" ]]; then
					echo
					echo -e " 抱歉...如果你想要使用${cyan} WebSocket + TLS $none传输协议.. ${red}V2Ray 端口不能为 80 或者 443 ...$none"
					echo
					echo -e " 当前 V2Ray 端口: ${cyan}$v2ray_port$none"
					error
				elif [[ $shadowsocks ]] && [[ $ssport == "80" || $ssport == "443" ]]; then
					echo
					echo -e " 抱歉...如果你想要使用${cyan} WebSocket + TLS $none传输协议.. ${red}Shadowsocks 端口不能为 80 或者 443 ...$none"
					echo
					echo -e " 当前 Shadowsocks 端口: ${cyan}$ssport$none"
					error
				else
					echo
					echo
					echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport_opt - 1]}$none"
					echo "----------------------------------------------------------------"
					echo
					break
				fi
				;;
			[1-9] | 1[0-5])
				echo
				echo
				echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport_opt - 1]}$none"
				echo "----------------------------------------------------------------"
				echo
				break
				;;
			*)
				error
				;;
			esac
		fi

	done
	pause

	if [[ $v2ray_transport_opt == 4 ]]; then
		ws_config
	elif [[ $v2ray_transport_opt -ge 9 ]]; then
		v2ray_dynamic_port_start
		v2ray_dynamic_port_end
		pause
		if [[ $v2ray_transport == 4 ]]; then
			del_port "80"
			del_port "443"
			if [[ $caddy_installed && $caddy_pid ]]; then
				# systemctl stop caddy
				do_service stop caddy
				if [[ $systemd ]]; then
					systemctl disable caddy >/dev/null 2>&1
				else
					update-rc.d -f caddy remove >/dev/null 2>&1
				fi
			elif [[ $caddy_installed ]]; then
				if [[ $systemd ]]; then
					systemctl disable caddy >/dev/null 2>&1
				else
					update-rc.d -f caddy remove >/dev/null 2>&1
				fi
			fi
		elif [[ $v2ray_transport -ge 9 ]]; then
			del_port "multiport"
		fi
		open_port "multiport"
		sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup
		port_range="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
		config
		clear
		v2ray_transport=$v2ray_transport_opt
		view_v2ray_config_info
		download_v2ray_config_ask
	else
		sed -i "17s/$v2ray_transport/$v2ray_transport_opt/" $backup
		if [[ $v2ray_transport == 4 ]]; then
			del_port "80"
			del_port "443"
			if [[ $caddy_installed && $caddy_pid ]]; then
				# systemctl stop caddy
				do_service stop caddy
				if [[ $systemd ]]; then
					systemctl disable caddy >/dev/null 2>&1
				else
					update-rc.d -f caddy remove >/dev/null 2>&1
				fi
			elif [[ $caddy_installed ]]; then
				if [[ $systemd ]]; then
					systemctl disable caddy >/dev/null 2>&1
				else
					update-rc.d -f caddy remove >/dev/null 2>&1
				fi
			fi
		elif [[ $v2ray_transport -ge 9 ]]; then
			del_port "multiport"
		fi
		config
		clear
		v2ray_transport=$v2ray_transport_opt
		view_v2ray_config_info
		download_v2ray_config_ask
	fi

}

ws_config() {
	while :; do
		echo
		echo
		echo
		echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！"
		read -p "(例如：233blog.com): " new_domain
		[ -z "$new_domain" ] && error && continue
		echo
		echo
		echo -e "$yellow 你的域名 = $cyan$new_domain$none"
		echo "----------------------------------------------------------------"
		break
	done
	get_ip
	echo
	echo
	echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
	echo
	echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
	echo
	echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
	echo "----------------------------------------------------------------"
	echo

	while :; do

		read -p "$(echo -e "(是否已经正确解析: [${magenta}Y$none]):") " record
		if [[ -z "$record" ]]; then
			error
		else
			if [[ "$record" == [Yy] ]]; then
				echo
				echo
				echo -e "$yellow 域名解析 = ${cyan}已解析$none"
				echo "----------------------------------------------------------------"
				echo
				break
			else
				error
			fi
		fi

	done

	if [[ $caddy_installed ]]; then
		pause
		domain_check
		sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup
		if [[ $v2ray_transport -ge 9 ]]; then
			del_port "multiport"
		fi
		domain=$new_domain
		open_port "80"
		open_port "443"
		if [[ $systemd ]]; then
			systemctl enable caddy >/dev/null 2>&1
		else
			update-rc.d -f caddy defaults >/dev/null 2>&1
		fi
		caddy_config
		config
		v2ray_transport=$v2ray_transport_opt
		clear
		view_v2ray_config_info
		download_v2ray_config_ask
	else
		echo -e "

		安装 Caddy 来实现 自动配置 TLS
		
		如果你已经安装 Nginx 或 Caddy

		$yellow并且..自己能搞定配置 TLS$none

		那么就不需要 打开自动配置 TLS
		"
		echo "----------------------------------------------------------------"
		echo

		while :; do

			read -p "$(echo -e "(是否自动配置 TLS: [${magenta}Y/N$none]):") " auto_install_caddy
			if [[ -z "$auto_install_caddy" ]]; then
				error
			else
				if [[ "$auto_install_caddy" == [Yy] ]]; then
					echo
					echo
					echo -e "$yellow 自动配置 TLS = $cyan打开$none"
					echo "----------------------------------------------------------------"
					echo
					pause
					domain_check
					sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/; 29s/false/true/" $backup
					if [[ $v2ray_transport -ge 9 ]]; then
						del_port "multiport"
					fi
					domain=$new_domain
					install_caddy
					open_port "80"
					open_port "443"
					caddy_config
					config
					v2ray_transport=$v2ray_transport_opt
					caddy_installed=true
					clear
					view_v2ray_config_info
					download_v2ray_config_ask
					break
				elif [[ "$auto_install_caddy" == [Nn] ]]; then
					echo
					echo
					echo -e "$yellow 自动配置 TLS = $cyan关闭$none"
					echo "----------------------------------------------------------------"
					echo
					pause
					domain_check
					sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup
					if [[ $v2ray_transport -ge 9 ]]; then
						del_port "multiport"
					fi
					domain=$new_domain
					open_port "80"
					open_port "443"
					config
					v2ray_transport=$v2ray_transport_opt
					clear
					view_v2ray_config_info
					download_v2ray_config_ask
					break
				else
					error
				fi
			fi

		done
	fi

}
install_caddy() {
	local caddy_tmp="/tmp/install_caddy/"
	local caddy_tmp_file="/tmp/install_caddy/caddy.tar.gz"
	if [[ $sys_bit == "i386" || $sys_bit == "i686" ]]; then
		local caddy_download_link="https://caddyserver.com/download/linux/386"
	elif [[ $sys_bit == "x86_64" ]]; then
		local caddy_download_link="https://caddyserver.com/download/linux/amd64"
	else
		echo -e "$red 自动安装 Caddy 失败！不支持你的系统。$none" && exit 1
	fi

	mkdir -p $caddy_tmp

	if ! wget --no-check-certificate -O "$caddy_tmp_file" $caddy_download_link; then
		echo -e "$red 下载 Caddy 失败！$none" && exit 1
	fi

	tar zxf $caddy_tmp_file -C $caddy_tmp
	cp -f ${caddy_tmp}caddy /usr/local/bin/

	if [[ ! -f /usr/local/bin/caddy ]]; then
		echo -e "$red 安装 Caddy 出错！" && exit 1
	fi

	if [[ $systemd ]]; then
		cp -f ${caddy_tmp}init/linux-systemd/caddy.service /lib/systemd/system/
		sed -i "s/www-data/root/g" /lib/systemd/system/caddy.service
		systemctl enable caddy
	else
		cp -f ${caddy_tmp}init/linux-sysvinit/caddy /etc/init.d/caddy
		sed -i "s/www-data/root/g" /etc/init.d/caddy
		chmod +x /etc/init.d/caddy
		update-rc.d -f caddy defaults
	fi

	mkdir -p /etc/ssl/caddy
	mkdir -p /etc/caddy/
	rm -rf $caddy_tmp

}
caddy_config() {
	local email=$(shuf -i1-10000000000 -n1)
	cat >/etc/caddy/Caddyfile <<-EOF
$domain {
    tls ${email}@gmail.com
	proxy / 127.0.0.1:${v2ray_port} {
		websocket
	}
}
		EOF
	# systemctl restart caddy
	do_service restart caddy
}
v2ray_dynamic_port_start() {
	echo
	echo
	while :; do
		echo -e "请输入 "$yellow"V2Ray 动态端口开始 "$none"范围 ["$magenta"1-65535"$none"]"
		read -p "$(echo -e "(默认开始端口: ${magenta}10000$none):")" v2ray_dynamic_port_start_input
		[ -z $v2ray_dynamic_port_start_input ] && v2ray_dynamic_port_start_input=10000
		case $v2ray_dynamic_port_start_input in
		$v2ray_port)
			echo
			echo " 不能和 V2Ray 端口一毛一样...."
			error
			;;
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | [1-6][0-5][0-5][0-3][0-5])
			if [[ $shadowsocks ]] && [[ $v2ray_dynamic_port_start_input == $ssport ]]; then
				echo
				echo " 不能和 Shadowsocks 端口一毛一样...."
				error
			else
				echo
				echo
				echo -e "$yellow V2Ray 动态端口开始 = $cyan$v2ray_dynamic_port_start_input$none"
				echo "----------------------------------------------------------------"
				echo
				break
			fi

			;;
		*)
			error
			;;
		esac

	done

	if [[ $v2ray_dynamic_port_start_input -lt $v2ray_port ]]; then
		lt_v2ray_port=true
	fi
	if [[ $shadowsocks ]] && [[ $v2ray_dynamic_port_start_input -lt $ssport ]]; then
		lt_ssport=true
	fi

}

v2ray_dynamic_port_end() {
	echo
	while :; do
		echo -e "请输入 "$yellow"V2Ray 动态端口结束 "$none"范围 ["$magenta"1-65535"$none"]"
		read -p "$(echo -e "(默认结束端口: ${magenta}20000$none):")" v2ray_dynamic_port_end_input
		[ -z $v2ray_dynamic_port_end_input ] && v2ray_dynamic_port_end_input=20000
		case $v2ray_dynamic_port_end_input in
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | [1-6][0-5][0-5][0-3][0-5])

			if [[ $v2ray_dynamic_port_end_input -le $v2ray_dynamic_port_start_input ]]; then
				echo
				echo " 不能小于或等于 V2Ray 动态端口开始范围"
				error
			elif [ $lt_v2ray_port ] && [[ ${v2ray_dynamic_port_end_input} -ge $v2ray_port ]]; then
				echo
				echo " V2Ray 动态端口结束范围 不能包括 V2Ray 端口..."
				echo
				echo -e " 当前 V2Ray 端口: ${cyan}$v2ray_port$none"
				error
			elif [ $lt_ssport ] && [[ ${v2ray_dynamic_port_end_input} -ge $ssport ]]; then
				echo
				echo " V2Ray 动态端口结束范围 不能包括 Shadowsocks 端口..."
				echo
				echo -e " 当前 Shadowsocks 端口: ${cyan}$ssport$none"
				error
			else
				echo
				echo
				echo -e "$yellow V2Ray 动态端口结束 = $cyan$v2ray_dynamic_port_end_input$none"
				echo "----------------------------------------------------------------"
				echo
				break
			fi
			;;
		*)
			error
			;;
		esac

	done

}
change_v2ray_dynamicport() {
	if [[ $v2ray_transport -ge 9 ]]; then
		change_v2ray_dynamic_port_start
		change_v2ray_dynamic_port_end
		pause
		del_port "multiport"
		open_port "multiport"
		sed -i "23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup
		port_range="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
		config
		# clear
		echo
		echo -e "$green 动态端口修改成功啦...你不需要修改 V2Ray 客户端配置...保持原有的配置即可..."
		echo
	else
		echo
		echo -e "$red ...当前传输协议木有启用动态端口...$none"
		echo
		while :; do
			echo -e "是否需要修改传输协议 [${magenta}Y/N$none]"
			read -p "$(echo -e "默认 [${magenta}N$none]:")" y_n
			if [[ -z $y_n ]]; then
				echo
				echo -e "$green 已取消修改传输协议...$none"
				echo
				break
			else
				if [[ $y_n == [Yy] ]]; then
					change_v2ray_transport
					break
				elif [[ $y_n == [Nn] ]]; then
					echo
					echo -e "$green 已取消修改传输协议...$none"
					echo
					break
				else
					error
				fi
			fi
		done

	fi
}
change_v2ray_dynamic_port_start() {
	echo
	echo
	while :; do
		echo -e "请输入 "$yellow"V2Ray 动态端口开始 "$none"范围 ["$magenta"1-65535"$none"]"
		read -p "$(echo -e "(当前动态开始端口: ${magenta}$v2ray_dynamicPort_start$none):")" v2ray_dynamic_port_start_input
		[ -z $v2ray_dynamic_port_start_input ] && error && continue
		case $v2ray_dynamic_port_start_input in
		$v2ray_port)
			echo
			echo " 不能和 V2Ray 端口一毛一样...."
			error
			;;
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | [1-6][0-5][0-5][0-3][0-5])
			if [[ $shadowsocks ]] && [[ $v2ray_dynamic_port_start_input == $ssport ]]; then
				echo
				echo " 不能和 Shadowsocks 端口一毛一样...."
				error
			else
				echo
				echo
				echo -e "$yellow V2Ray 动态端口开始 = $cyan$v2ray_dynamic_port_start_input$none"
				echo "----------------------------------------------------------------"
				echo
				break
			fi

			;;
		*)
			error
			;;
		esac

	done

	if [[ $v2ray_dynamic_port_start_input -lt $v2ray_port ]]; then
		lt_v2ray_port=true
	fi
	if [[ $shadowsocks ]] && [[ $v2ray_dynamic_port_start_input -lt $ssport ]]; then
		lt_ssport=true
	fi

}

change_v2ray_dynamic_port_end() {
	echo
	while :; do
		echo -e "请输入 "$yellow"V2Ray 动态端口结束 "$none"范围 ["$magenta"1-65535"$none"]"
		read -p "$(echo -e "(当前动态结束端口: ${magenta}$v2ray_dynamicPort_end$none):")" v2ray_dynamic_port_end_input
		[ -z $v2ray_dynamic_port_end_input ] && error && continue
		case $v2ray_dynamic_port_end_input in
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | [1-6][0-5][0-5][0-3][0-5])

			if [[ $v2ray_dynamic_port_end_input -le $v2ray_dynamic_port_start_input ]]; then
				echo
				echo " 不能小于或等于 V2Ray 动态端口开始范围"
				error
			elif [ $lt_v2ray_port ] && [[ ${v2ray_dynamic_port_end_input} -ge $v2ray_port ]]; then
				echo
				echo " V2Ray 动态端口结束范围 不能包括 V2Ray 端口..."
				echo
				echo -e " 当前 V2Ray 端口: ${cyan}$v2ray_port$none"
				error
			elif [ $lt_ssport ] && [[ ${v2ray_dynamic_port_end_input} -ge $ssport ]]; then
				echo
				echo " V2Ray 动态端口结束范围 不能包括 Shadowsocks 端口..."
				echo
				echo -e " 当前 Shadowsocks 端口: ${cyan}$ssport$none"
				error
			else
				echo
				echo
				echo -e "$yellow V2Ray 动态端口结束 = $cyan$v2ray_dynamic_port_end_input$none"
				echo "----------------------------------------------------------------"
				echo
				break
			fi
			;;
		*)
			error
			;;
		esac

	done

}
change_v2ray_id() {
	echo
	while :; do
		echo -e "是否确定要修改用户ID [${magenta}Y/N$none]"
		read -p "$(echo -e "默认 [${magenta}N$none]:")" y_n
		if [[ -z $y_n ]]; then
			echo
			echo -e "$green 已取消修改用户ID...$none"
			echo
			break
		else
			if [[ $y_n == [Yy] ]]; then
				echo
				echo
				echo -e "$yellow 修改用户ID = $cyan确定$none"
				echo "----------------------------------------------------------------"
				echo
				pause
				sed -i "21s/$v2ray_id/$uuid/;" $backup
				v2ray_id=$uuid
				config
				clear
				view_v2ray_config_info
				download_v2ray_config_ask
				break
			elif [[ $y_n == [Nn] ]]; then
				echo
				echo -e "$green 已取消修改用户ID...$none"
				echo
				break
			else
				error
			fi
		fi
	done
}
change_domain() {
	if [[ $v2ray_transport == 4 && $caddy_installed ]]; then
		while :; do
			echo
			echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！"
			read -p "(当前域名：$domain): " new_domain
			[ -z "$new_domain" ] && error && continue
			if [[ $new_domain == $domain ]]; then
				echo
				echo -e " 跟当前域名一毛一样啊...修改个鸡鸡哦"
				echo
				error && continue
			fi
			echo
			echo
			echo -e "$yellow 你的域名 = $cyan$new_domain$none"
			echo "----------------------------------------------------------------"
			break
		done
		get_ip
		echo
		echo
		echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
		echo
		echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
		echo
		echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
		echo "----------------------------------------------------------------"
		echo

		while :; do

			read -p "$(echo -e "(是否已经正确解析: [${magenta}Y$none]):") " record
			if [[ -z "$record" ]]; then
				error
			else
				if [[ "$record" == [Yy] ]]; then
					echo
					echo
					echo -e "$yellow 域名解析 = ${cyan}已解析$none"
					echo "----------------------------------------------------------------"
					echo
					pause
					domain_check
					sed -i "27s/$domain/$new_domain/" $backup
					domain=$new_domain
					caddy_config
					config
					clear
					view_v2ray_config_info
					download_v2ray_config_ask
					break
				else
					error
				fi
			fi

		done
	else
		echo
		echo -e "$red 抱歉...不支持修改...$none"
		echo
		echo -e " 备注..修改 TLS 域名仅支持传输协议为 ${yellow}WebSocket + TLS$none 并且$yellow 自动配置 TLS = 打开$none"
		echo
		echo -e " 当前传输协议为: ${cyan}${transport[$v2ray_transport - 1]}${none}"
		echo
		if [[ $caddy_installed ]]; then
			echo -e " 自动配置 TLS = ${cyan}打开$none"
		else
			echo -e " 自动配置 TLS = $red关闭$none"
		fi
		echo
	fi
}
domain_check() {
	test_domain=$(dig $new_domain +short)
	if [[ $test_domain != $ip ]]; then
		echo
		echo -e "$red 检测域名解析错误....$none"
		echo
		echo -e " 你的域名: $yellow$new_domain$none 未解析到: $cyan$ip$none"
		echo
		echo "备注...如果你的域名是使用 Cloudflare 解析的话..在 Status 那里点一下那图标..让它变灰"
		echo
		exit 1
	fi
}
blocked_hosts() {
	if [[ $is_blocked_ad ]]; then
		local _info="$green已开启$none"
	else
		local _info="$red已关闭$none"
	fi
	_opt=''
	while :; do
		echo
		echo -e "$yellow 1. $none开启 广告拦截"
		echo
		echo -e "$yellow 2. $none关闭 广告拦截"
		echo
		echo "备注: 广告拦截是基于 域名 拦截的..所以也许会造成浏览网页的时候出现部分元素留白..或者其他问题"
		echo
		echo "反馈问题或请求拦截更多域名: https://github.com/233boy/v2ray/issues"
		echo
		echo -e "当前广告拦截状态: $_info"
		echo
		read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" _opt
		if [[ -z $_opt ]]; then
			error
		else
			case $_opt in
			1)
				if [[ $is_blocked_ad ]]; then
					echo
					echo -e " 大胸弟...难不成你没有看到 (当前广告拦截状态: $_info) 这个帅帅的提示么.....还开启个鸡鸡哦"
					echo
				else
					echo
					echo
					echo -e "$yellow 广告拦截 = $cyan开启$none"
					echo "----------------------------------------------------------------"
					echo
					pause
					sed -i "39s/false/true/" $backup
					is_blocked_ad=true
					config
					echo
					echo
					echo -e "$green 广告拦截已开启...如果出现异常..那就关闭它咯$none"
					echo
				fi
				break
				;;
			2)
				if [[ $is_blocked_ad ]]; then
					echo
					echo
					echo -e "$yellow 广告拦截 = $cyan关闭$none"
					echo "----------------------------------------------------------------"
					echo
					pause
					sed -i "39s/true/false/" $backup
					is_blocked_ad=''
					config
					echo
					echo
					echo -e "$red 广告拦截已关闭...不过你也可以随时重新开启 ...只要你喜欢$none"
					echo
				else
					echo
					echo -e " 大胸弟...难不成你没有看到 (当前广告拦截状态: $_info) 这个帅帅的提示么.....还关闭个鸡鸡哦"
					echo
				fi
				break
				;;
			*)
				error
				;;
			esac
		fi
	done

}
v2ray_service() {
	while :; do
		echo
		echo -e "$yellow 1. $none启动 V2Ray"
		echo
		echo -e "$yellow 2. $none停止 V2Ray"
		echo
		echo -e "$yellow 3. $none重启 V2Ray"
		echo
		echo -e "$yellow 4. $none查看访问日志"
		echo
		echo -e "$yellow 5. $none查看错误日志"
		echo
		read -p "$(echo -e "请选择 [${magenta}1-5$none]:")" _opt
		if [[ -z $_opt ]]; then
			error
		else
			case $_opt in
			1)
				start_v2ray
				break
				;;
			2)
				stop_v2ray
				break
				;;
			3)
				restart_v2ray
				break
				;;
			4)
				view_v2ray_log
				break
				;;
			5)
				view_v2ray_error_log
				break
				;;
			*)
				error
				;;
			esac
		fi
	done
}
start_v2ray() {
	if [[ $v2ray_pid ]]; then
		echo
		echo -e "${green} V2Ray 正在运行...无需再启动$none"
		echo
	else

		# systemctl start v2ray
		service v2ray start >/dev/null 2>&1
		local is_v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}')
		if [[ $is_v2ray_pid ]]; then
			echo
			echo -e "${green} V2Ray 已启动$none"
			echo
		else
			echo
			echo -e "${red} V2Ray 启动失败！$none"
			echo
		fi

	fi
}
stop_v2ray() {
	if [[ $v2ray_pid ]]; then
		# systemctl stop v2ray
		service v2ray stop >/dev/null 2>&1
		echo
		echo -e "${green} V2Ray 已停止$none"
		echo
	else
		echo
		echo -e "${red} V2Ray 没有在运行$none"
		echo
	fi
}
restart_v2ray() {
	# systemctl restart v2ray
	service v2ray restart >/dev/null 2>&1
	local is_v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}')
	if [[ $is_v2ray_pid ]]; then
		echo
		echo -e "${green} V2Ray 重启完成 $none"
		echo
	else
		echo
		echo -e "${red} V2Ray 重启失败！$none"
		echo
	fi
}
view_v2ray_log() {
	echo
	echo -e "$green 按 Ctrl + C 即可退出...$none"
	echo
	tail -f /var/log/v2ray/access.log
}
view_v2ray_error_log() {
	echo
	echo -e "$green 按 Ctrl + C 即可退出...$none"
	echo
	tail -f /var/log/v2ray/error.log
}
download_v2ray_config() {
	while :; do
		echo
		echo -e "$yellow 1. $none直接下载 V2Ray 客户端配置文件(仅支持 Xshell)"
		echo
		echo -e "$yellow 2. $none生成 V2Ray 客户端配置文件下载链接"
		echo
		echo -e "$yellow 3. $none生成 V2Ray 配置信息链接"
		echo
		echo -e "$yellow 4. $none生成 V2Ray 配置二维码链接"
		echo
		read -p "$(echo -e "请选择 [${magenta}1-4$none]:")" other_opt
		if [[ -z $other_opt ]]; then
			error
		else
			case $other_opt in
			1)
				get_v2ray_config
				break
				;;
			2)
				get_v2ray_config_link
				break
				;;
			3)
				get_v2ray_config_info_link
				break
				;;
			4)
				get_v2ray_config_qr_link
				break
				;;
			*)
				error
				;;
			esac
		fi
	done
}
get_v2ray_config() {
	echo
	echo " 如果你当前使用的 SSH 客户端不是 Xshell 的话...下载 V2Ray 客户端配置文件将会出现卡死情况"
	echo
	while :; do
		read -p "$(echo -e "不要BB...哥就是在使用 Xshell [${magenta}Y$none]:")" is_xshell
		if [[ -z $is_xshell ]]; then
			error
		else
			if [[ $is_xshell == [yY] ]]; then
				echo
				echo "开始下载....请选择 V2Ray 客户端配置文件保存位置"
				echo
				sz /etc/v2ray/233blog_v2ray.zip
				echo
				echo
				echo -e "$green 下载完成咯...$none"
				echo
				echo -e "$yellow 解压密码 = ${cyan}233blog.com$none"
				echo
				echo -e "$yellow SOCKS 监听端口 = ${cyan}2333${none}"
				echo
				echo -e "${yellow} HTTP 监听端口 = ${cyan}6666$none"
				echo
				echo "V2Ray 客户端使用教程: https://233blog.com/post/20/"
				echo
				break
			else
				error
			fi
		fi
	done
}
get_v2ray_config_link() {
	echo
	echo -e "$green 正在生成链接.... 稍等片刻即可....$none"
	echo
	local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
	local link=$(curl -s --upload-file /etc/v2ray/233blog_v2ray.zip "https://transfer.sh/${random}_233blog_v2ray.zip")
	if [[ $link ]]; then
		echo
		echo "---------- V2Ray 客户端配置文件链接 -------------"
		echo
		echo -e "$yellow 链接 = $cyan$link$none"
		echo
		echo -e "$yellow 解压密码 = ${cyan}233blog.com$none"
		echo
		echo -e "$yellow SOCKS 监听端口 = ${cyan}2333${none}"
		echo
		echo -e "${yellow} HTTP 监听端口 = ${cyan}6666$none"
		echo
		echo " V2Ray 客户端使用教程: https://233blog.com/post/20/"
		echo
		echo "备注...链接将在 14 天后失效"
		echo
		echo "提醒...请不要把链接分享出去...除非你有特别的理由...."
		echo
	else
		echo
		echo -e "$red 哎呀呀呀...出错咯...请重试$none"
		echo
	fi
}
create_v2ray_config_text() {

	get_transport_args

	echo
	echo
	echo "---------- V2Ray 配置信息 -------------"
	if [[ $v2ray_transport == "4" ]]; then
		if [[ ! $caddy_installed ]]; then
			echo
			echo " 警告！请自行配置 TLS...教程: https://233blog.com/post/19/"
		fi
		echo
		echo "地址 (Address) = ${domain}"
		echo
		echo "端口 (Port) = 443"
		echo
		echo "用户ID (User ID / UUID) = ${v2ray_id}"
		echo
		echo "额外ID (Alter Id) = 233"
		echo
		echo "传输协议 (Network) = ${network}"
		echo
		echo "伪装类型 (header type) = ${header}"
		echo
		echo "TLS (Enable TLS) = 打开"
		echo
		echo -e " 请将 Obfs 设置为 $obfs ...并忽略 传输协议... (如果你使用 Pepi / ShadowRay) "
		echo
		if [[ $is_blocked_ad ]]; then
			echo " 备注: 广告拦截已开启.."
			echo
		fi
	else
		[[ -z $ip ]] && get_ip
		echo
		echo "地址 (Address) = ${ip}"
		echo
		echo "端口 (Port) = $v2ray_port"
		echo
		echo "用户ID (User ID / UUID) = ${v2ray_id}"
		echo
		echo "额外ID (Alter Id) = 233"
		echo
		echo "传输协议 (Network) = ${network}"
		echo
		echo "伪装类型 (header type) = ${header}"
		echo
		if [[ $obfs ]]; then
			echo -e "请将 Obfs 设置为 $obfs ...并忽略 传输协议... (如果你使用 Pepi / ShadowRay) "
			echo
		else
			echo -e "帅帅的提示...此 V2Ray 配置不支持 Pepi / ShadowRay"
			echo
		fi
		if [[ $v2ray_transport -ge 9 && $is_blocked_ad ]]; then
			echo "备注: 动态端口已启用...广告拦截已开启..."
			echo
		elif [[ $v2ray_transport -ge 9 ]]; then
			echo "备注: 动态端口已启用..."
			echo
		elif [[ $is_blocked_ad ]]; then
			echo "备注: 广告拦截已开启.."
			echo
		fi
	fi
	echo "---------- END -------------"
	echo
	echo "V2Ray 客户端使用教程: https://233blog.com/post/20/"
	echo
}
get_v2ray_config_info_link() {
	echo
	echo -e "$green 正在生成链接.... 稍等片刻即可....$none"
	echo
	create_v2ray_config_text >/tmp/233blog_v2ray.txt
	local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
	local link=$(curl -s --upload-file /tmp/233blog_v2ray.txt "https://transfer.sh/${random}_233blog_v2ray.txt")
	if [[ $link ]]; then
		echo
		echo "---------- V2Ray 配置信息链接-------------"
		echo
		echo -e "$yellow 链接 = $cyan$link$none"
		echo
		echo -e " V2Ray 客户端使用教程: https://233blog.com/post/20/"
		echo
		echo "备注...链接将在 14 天后失效..."
		echo
		echo "提醒...请不要把链接分享出去...除非你有特别的理由...."
		echo
	else
		echo
		echo -e "$red 哎呀呀呀...出错咯...请重试$none"
		echo
	fi
	rm -rf /tmp/233blog_v2ray.txt
}
get_v2ray_config_qr_link() {

	create_vmess_URL_config

	if [[ $obfs ]]; then
		if [[ $v2ray_transport == 4 ]]; then
			ip_or_domain=$domain
		else
			ip_or_domain=$ip
		fi
		local shadowray_qr="vmess://$(echo -n "aes-128-cfb:${v2ray_id}@${ip_or_domain}:${v2ray_port}" | base64)?remarks=233blog_v2ray_${ip_or_domain}&obfs=${obfs}"
		echo "${shadowray_qr}" >/etc/v2ray/shadowray_qr.txt
		sed -i 'N;s/\n//' /etc/v2ray/shadowray_qr.txt
	fi
	echo
	echo -e "$green 正在生成链接.... 稍等片刻即可....$none"
	echo
	case $v2ray_transport in
	[1-4] | 9 | 10 | 11)
		local ios_qr=true
		local random3=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
		cat /etc/v2ray/shadowray_qr.txt | qrencode -s 50 -o /tmp/233blog_shadowray_qr.png
		local link3=$(curl -s --upload-file /tmp/233blog_shadowray_qr.png "https://transfer.sh/${random3}_233blog_v2ray.png")
		;;
	esac
	local vmess="vmess://$(cat /etc/v2ray/vmess_qr.json | base64)"
	echo $vmess >/etc/v2ray/vmess.txt
	cat /etc/v2ray/vmess.txt | qrencode -s 50 -o /tmp/233blog_v2ray.png
	local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
	local link=$(curl -s --upload-file /tmp/233blog_v2ray.png "https://transfer.sh/${random}_233blog_v2ray.png")
	if [[ $link ]]; then
		echo
		echo "---------- V2Ray 二维码链接 -------------"
		echo
		echo -e "$yellow 适用于 V2RayNG / Kitsunebi = $cyan$link$none"
		echo
		if [[ $ios_qr && $link3 ]]; then
			echo -e "$yellow 适用于 Pepi / ShadowRay = $cyan${link3}$none"
			echo
			echo " 请在 Pepi / ShadowRay 配置界面将 Alter Id 设置为 233 (如果你使用 Pepi / ShadowRay)"
			if [[ $v2ray_transport == 4 ]]; then
				echo
				echo " 请在 Pepi / ShadowRay 配置界面打开 TLS (Enable TLS) (如果你使用 Pepi / ShadowRay)"
			fi
		elif [[ $ios_qr ]]; then
			echo -e "$red 生成适用于 Pepi / ShadowRay 的二维码链接 出错.... $none 请尝试使用${cyan} v2ray qr ${none}重新生成"
		else
			echo -e "$red 帅帅的提示...此 V2Ray 配置不支持 Pepi / ShadowRay...$none"
		fi
		echo
		echo " V2Ray 客户端使用教程: https://233blog.com/post/20/"
		echo
		echo "备注...链接将在 14 天后失效"
		echo
		echo "提醒...请不要把链接分享出去...除非你有特别的理由...."
		echo
	else
		echo
		echo -e "$red 哎呀呀呀...出错咯...$none"
		echo
		echo -e "请尝试使用${cyan} v2ray qr ${none}重新生成"
		echo
	fi
	rm -rf /tmp/233blog_v2ray.png
	rm -rf /etc/v2ray/vmess_qr.json
	rm -rf /etc/v2ray/vmess.txt
	if [[ $ios_qr ]]; then
		rm -rf /tmp/233blog_shadowray_qr.png
		rm -rf /etc/v2ray/shadowray_qr.txt
	fi
}
get_v2ray_vmess_URL_link() {
	create_vmess_URL_config
	local vmess="vmess://$(cat /etc/v2ray/vmess_qr.json | base64)"
	echo
	echo "---------- V2Ray vmess URL / 仅适合部分客户端 -------------"
	echo
	echo $vmess
	echo
	rm -rf /etc/v2ray/vmess_qr.json	
}
other() {
	while :; do
		echo
		echo -e "$yellow 1. $none安装 BBR"
		echo
		echo -e "$yellow 2. $none安装 LotServer(锐速)"
		echo
		echo -e "$yellow 3. $none卸载 LotServer(锐速)"
		echo
		read -p "$(echo -e "请选择 [${magenta}1-3$none]:")" _opt
		if [[ -z $_opt ]]; then
			error
		else
			case $_opt in
			1)
				install_bbr
				break
				;;
			2)
				install_lotserver
				break
				;;
			3)
				uninstall_lotserver
				break
				;;
			*)
				error
				;;
			esac
		fi
	done
}
install_bbr() {
	local test1=$(sed -n '/net.ipv4.tcp_congestion_control/p' /etc/sysctl.conf)
	local test2=$(sed -n '/net.core.default_qdisc/p' /etc/sysctl.conf)
	if [[ $(uname -r | cut -b 1) -eq 4 ]]; then
		case $(uname -r | cut -b 3-4) in
		9. | [1-9][0-9])
			if [[ $test1 == "net.ipv4.tcp_congestion_control = bbr" && $test2 == "net.core.default_qdisc = fq" ]]; then
				local is_bbr=true
			else
				local try_enable_bbr=true
			fi
			;;
		esac
	fi
	if [[ $is_bbr ]]; then
		echo
		echo -e "$green BBR 已经启用啦...无需再安装$none"
		echo
	elif [[ $try_enable_bbr ]]; then
		sed -i '/net.ipv4.tcp_congestion_control/d' /etc/sysctl.conf
		sed -i '/net.core.default_qdisc/d' /etc/sysctl.conf
		echo "net.ipv4.tcp_congestion_control = bbr" >>/etc/sysctl.conf
		echo "net.core.default_qdisc = fq" >>/etc/sysctl.conf
		sysctl -p >/dev/null 2>&1
		echo
		echo -e "$green ..由于你的小鸡鸡的内核支持开启 BBR ...已经为你启用 BBR 优化....$none"
		echo
	else
		# https://teddysun.com/489.html
		bash <(curl -s -L https://github.com/teddysun/across/raw/master/bbr.sh)
	fi
}
install_lotserver() {
	# https://moeclub.org/2017/03/08/14/
	wget --no-check-certificate -qO /tmp/appex.sh "https://raw.githubusercontent.com/0oVicero0/serverSpeeder_Install/master/appex.sh"
	bash /tmp/appex.sh 'install'
	rm -rf /tmp/appex.sh
}
uninstall_lotserver() {
	# https://moeclub.org/2017/03/08/14/
	wget --no-check-certificate -qO /tmp/appex.sh "https://raw.githubusercontent.com/0oVicero0/serverSpeeder_Install/master/appex.sh"
	bash /tmp/appex.sh 'uninstall'
	rm -rf /tmp/appex.sh
}

open_port() {
	if [[ $1 != "multiport" ]]; then
		# if [[ $cmd == "apt-get" ]]; then
		iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
		iptables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
		ip6tables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
		ip6tables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT

		# iptables-save >/etc/iptables.rules.v4
		# ip6tables-save >/etc/iptables.rules.v6
		# else
		# 	firewall-cmd --permanent --zone=public --add-port=$1/tcp
		# 	firewall-cmd --permanent --zone=public --add-port=$1/udp
		# 	firewall-cmd --reload
		# fi
	else
		# if [[ $cmd == "apt-get" ]]; then
		local multiport="${v2ray_dynamic_port_start_input}:${v2ray_dynamic_port_end_input}"
		iptables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT
		iptables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT
		ip6tables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT
		ip6tables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT

		# iptables-save >/etc/iptables.rules.v4
		# ip6tables-save >/etc/iptables.rules.v6
		# else
		# 	local multi_port="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
		# 	firewall-cmd --permanent --zone=public --add-port=$multi_port/tcp
		# 	firewall-cmd --permanent --zone=public --add-port=$multi_port/udp
		# 	firewall-cmd --reload
		# fi
	fi
	if [[ $cmd == "apt-get" ]]; then
		iptables-save >/etc/iptables.rules.v4
		ip6tables-save >/etc/iptables.rules.v6
	else
		service iptables save
		service ip6tables save
	fi

}
del_port() {
	if [[ $1 != "multiport" ]]; then
		# if [[ $cmd == "apt-get" ]]; then
		iptables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
		iptables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
		ip6tables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
		ip6tables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
		# else
		# 	firewall-cmd --permanent --zone=public --remove-port=$1/tcp
		# 	firewall-cmd --permanent --zone=public --remove-port=$1/udp
		# fi
	else
		# if [[ $cmd == "apt-get" ]]; then
		local ports="${v2ray_dynamicPort_start}:${v2ray_dynamicPort_end}"
		iptables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT
		iptables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT
		ip6tables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT
		ip6tables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT
		# else
		# 	local ports="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}"
		# 	firewall-cmd --permanent --zone=public --remove-port=$ports/tcp
		# 	firewall-cmd --permanent --zone=public --remove-port=$ports/udp
		# fi
	fi
	if [[ $cmd == "apt-get" ]]; then
		iptables-save >/etc/iptables.rules.v4
		ip6tables-save >/etc/iptables.rules.v6
	else
		service iptables save
		service ip6tables save
	fi
}
update() {
	while :; do
		echo
		echo -e "$yellow 1. $none更新 V2Ray 主程序"
		echo
		echo -e "$yellow 2. $none更新 V2Ray 管理脚本"
		echo
		read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" _opt
		if [[ -z $_opt ]]; then
			error
		else
			case $_opt in
			1)
				update_v2ray
				break
				;;
			2)
				update_v2ray.sh
				exit
				break
				;;
			*)
				error
				;;
			esac
		fi
	done
}
update_v2ray() {
	[ -d /tmp/v2ray ] && rm -rf /tmp/v2ray
	mkdir -p /tmp/v2ray

	v2ray_tmp_file="/tmp/v2ray/v2ray.zip"
	v2ray_latest_ver="$(curl -s https://api.github.com/repos/v2ray/v2ray-core/releases/latest | grep 'tag_name' | cut -d\" -f4)"
	if [[ $v2ray_ver != $v2ray_latest_ver ]]; then
		echo
		echo -e " $green 咦...发现新版本耶....正在拼命更新.......$none"
		echo
		v2ray_download_link="https://github.com/v2ray/v2ray-core/releases/download/$v2ray_latest_ver/v2ray-linux-${v2ray_bit}.zip"

		if ! wget --no-check-certificate -O "$v2ray_tmp_file" $v2ray_download_link; then
			echo -e "
			$red 下载 V2Ray 文件失败啦..可能是你的小鸡鸡的网络太辣鸡了...重新尝试更新也许能解决$none
			" && exit 1
		fi

		unzip $v2ray_tmp_file -d "/tmp/v2ray/"
		mkdir -p /usr/bin/v2ray
		cp -f "/tmp/v2ray/v2ray-${v2ray_latest_ver}-linux-${v2ray_bit}/v2ray" "/usr/bin/v2ray/v2ray"
		chmod +x "/usr/bin/v2ray/v2ray"
		cp -f "/tmp/v2ray/v2ray-${v2ray_latest_ver}-linux-${v2ray_bit}/v2ctl" "/usr/bin/v2ray/v2ctl"
		chmod +x "/usr/bin/v2ray/v2ctl"
		# systemctl restart v2ray
		# service v2ray restart >/dev/null 2>&1
		do_service restart v2ray
		echo
		echo -e " $green 更新成功啦...当前 V2Ray 版本: ${cyan}$v2ray_latest_ver$none"
		echo
		rm -rf /tmp/v2ray
	else
		echo
		echo -e " $green 木有发现新版本....$none"
		echo
	fi
}
update_v2ray.sh() {
	local latest_version=$(curl -s -L https://raw.githubusercontent.com/233boy/v2ray/master/v2ray.sh | grep '_version' -m1 | cut -d\" -f2)
	if [[ $latest_version == $_version ]]; then
		echo
		echo -e "$green 木有发现新版本 $none"
		echo
	else
		echo
		echo -e " $green 咦...发现新版本耶....正在拼命更新.......$none"
		echo
		cd /etc/v2ray/233boy/v2ray
		git pull
		cp -f /etc/v2ray/233boy/v2ray/v2ray.sh /usr/local/bin/v2ray
		chmod +x /usr/local/bin/v2ray
		echo
		echo -e "$green 更新成功啦...当前 V2Ray 管理脚本 版本: ${cyan}$latest_version$none"
		echo
	fi

}
uninstall_v2ray() {
	while :; do
		echo
		read -p "$(echo -e "是否卸载 ${yellow}V2Ray$none [${magenta}Y/N$none]:")" uninstall_v2ray_ask
		if [[ -z $uninstall_v2ray_ask ]]; then
			error
		else
			case $uninstall_v2ray_ask in
			Y | y)
				is_uninstall_v2ray=true
				echo
				echo -e "$yellow 卸载 V2Ray = ${cyan}是${none}"
				echo
				break
				;;
			N | n)
				echo
				echo -e "$red 卸载已取消...$none"
				echo
				break
				;;
			*)
				error
				;;
			esac
		fi
	done

	if [[ $caddy_installed ]] && [[ -f /usr/local/bin/caddy && -f /etc/caddy/Caddyfile ]]; then
		while :; do
			echo
			read -p "$(echo -e "是否卸载 ${yellow}Caddy$none [${magenta}Y/N$none]:")" uninstall_caddy_ask
			if [[ -z $uninstall_caddy_ask ]]; then
				error
			else
				case $uninstall_caddy_ask in
				Y | y)
					is_uninstall_caddy=true
					echo
					echo -e "$yellow 卸载 Caddy = ${cyan}是${none}"
					echo
					break
					;;
				N | n)
					echo
					echo -e "$yellow 卸载 Caddy = ${cyan}否${none}"
					echo
					break
					;;
				*)
					error
					;;
				esac
			fi
		done
	fi

	if [[ $is_uninstall_v2ray && $is_uninstall_caddy ]]; then
		pause
		echo

		if [[ $shadowsocks ]]; then
			del_port $ssport
		fi

		if [[ $v2ray_transport == "4" ]]; then
			del_port "80"
			del_port "443"
			del_port $v2ray_port
		elif [[ $v2ray_transport -ge 9 ]]; then
			del_port $v2ray_port
			del_port "multiport"
		else
			del_port $v2ray_port
		fi

		[ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables

		# [ $v2ray_pid ] && systemctl stop v2ray
		[ $v2ray_pid ] && do_service stop v2ray

		rm -rf /usr/bin/v2ray
		rm -rf /usr/local/bin/v2ray
		rm -rf /etc/v2ray
		rm -rf /var/log/v2ray

		# [ $caddy_pid ] && systemctl stop caddy
		[ $caddy_pid ] && do_service stop caddy

		rm -rf /usr/local/bin/caddy
		rm -rf /etc/caddy
		rm -rf /etc/ssl/caddy

		if [[ $systemd ]]; then
			systemctl disable v2ray >/dev/null 2>&1
			rm -rf /lib/systemd/system/v2ray.service
			systemctl disable caddy >/dev/null 2>&1
			rm -rf /lib/systemd/system/caddy.service
		else
			update-rc.d -f caddy remove >/dev/null 2>&1
			update-rc.d -f v2ray remove >/dev/null 2>&1
			rm -rf /etc/init.d/caddy
			rm -rf /etc/init.d/v2ray
		fi
		# clear
		echo
		echo -e "$green V2Ray 卸载完成啦 ....$none"
		echo
		echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我"
		echo
		echo "反馈问题: https://github.com/233boy/v2ray/issus"
		echo

	elif [[ $is_uninstall_v2ray ]]; then
		pause
		echo

		if [[ $shadowsocks ]]; then
			del_port $ssport
		fi

		if [[ $v2ray_transport == "4" ]]; then
			del_port "80"
			del_port "443"
			del_port $v2ray_port
		elif [[ $v2ray_transport -ge 9 ]]; then
			del_port $v2ray_port
			del_port "multiport"
		else
			del_port $v2ray_port
		fi

		[ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables

		# [ $v2ray_pid ] && systemctl stop v2ray
		[ $v2ray_pid ] && do_service stop v2ray

		rm -rf /usr/bin/v2ray
		rm -rf /usr/local/bin/v2ray
		rm -rf /etc/v2ray
		rm -rf /var/log/v2ray
		if [[ $systemd ]]; then
			systemctl disable v2ray >/dev/null 2>&1
			rm -rf /lib/systemd/system/v2ray.service
		else
			update-rc.d -f v2ray remove >/dev/null 2>&1
			rm -rf /etc/init.d/v2ray
		fi
		# clear
		echo
		echo -e "$green V2Ray 卸载完成啦 ....$none"
		echo
		echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我"
		echo
		echo "反馈问题: https://github.com/233boy/v2ray/issus"
		echo
	fi
}
config() {
	if [[ $shadowsocks || $new_shadowsocks ]]; then
		if [[ $v2ray_transport_opt ]]; then
			if [[ $is_blocked_ad ]]; then
				case $v2ray_transport_opt in
				1)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				2)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				3)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				4)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
					;;
				5 | 6 | 7 | 8)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				9)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				10)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				11)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				12 | 13 | 14 | 15)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				esac
			else
				case $v2ray_transport_opt in
				1)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				2)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				3)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				4)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
					;;
				5 | 6 | 7 | 8)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				9)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				10)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				11)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				12 | 13 | 14 | 15)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				esac
			fi
		else
			if [[ $is_blocked_ad ]]; then
				case $v2ray_transport in
				1)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				2)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				3)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				4)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
					;;
				5 | 6 | 7 | 8)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				9)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				10)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				11)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				12 | 13 | 14 | 15)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				esac
			else
				case $v2ray_transport in
				1)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				2)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				3)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				4)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
					;;
				5 | 6 | 7 | 8)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				9)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				10)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				11)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				12 | 13 | 14 | 15)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				esac
			fi
		fi

	else
		if [[ $v2ray_transport_opt ]]; then
			if [[ $is_blocked_ad ]]; then
				case $v2ray_transport_opt in
				1)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				2)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				3)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				4)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
					;;
				5 | 6 | 7 | 8)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				9)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/sblocked_hosts/erver/tcp_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				10)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				11)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				12 | 13 | 14 | 15)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				esac
			else
				case $v2ray_transport_opt in
				1)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				2)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				3)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				4)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
					;;
				5 | 6 | 7 | 8)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				9)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				10)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				11)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				12 | 13 | 14 | 15)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				esac
			fi
		else
			if [[ $is_blocked_ad ]]; then
				case $v2ray_transport in
				1)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				2)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				3)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				4)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
					;;
				5 | 6 | 7 | 8)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				9)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/sblocked_hosts/erver/tcp_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				10)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				11)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				12 | 13 | 14 | 15)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				esac
			else
				case $v2ray_transport in
				1)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				2)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				3)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				4)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
					;;
				5 | 6 | 7 | 8)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				9)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
					;;
				10)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
					;;
				11)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
					;;
				12 | 13 | 14 | 15)
					v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_dynamic.json"
					v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
					;;
				esac
			fi
		fi

	fi

	cp -f $v2ray_server_config_file $v2ray_server_config
	cp -f $v2ray_client_config_file $v2ray_client_config

	if [[ $new_shadowsocks ]]; then
		case $v2ray_transport in
		1)
			sed -i "28s/$ssport/$new_ssport/; 30s/$ssciphers/$new_ssciphers/; 31s/$sspass/$new_sspass/" $v2ray_server_config
			;;
		2)
			sed -i "50s/$ssport/$new_ssport/; 52s/$ssciphers/$new_ssciphers/; 53s/$sspass/$new_sspass/" $v2ray_server_config
			;;
		3 | 4)
			sed -i "31s/$ssport/$new_ssport/; 33s/$ssciphers/$new_ssciphers/; 34s/$sspass/$new_sspass/" $v2ray_server_config
			;;
		5 | 6 | 7 | 8)
			sed -i "43s/$ssport/$new_ssport/; 45s/$ssciphers/$new_ssciphers/; 46s/$sspass/$new_sspass/" $v2ray_server_config
			;;
		9)
			sed -i "31s/$ssport/$new_ssport/; 33s/$ssciphers/$new_ssciphers/; 34s/$sspass/$new_sspass/; 42s/10000-20000/$port_range/" $v2ray_server_config
			;;
		10)
			sed -i "67s/$ssport/$new_ssport/; 69s/$ssciphers/$new_ssciphers/; 70s/$sspass/$new_sspass/; 78s/10000-20000/$port_range/" $v2ray_server_config
			;;
		*)
			sed -i "34s/$ssport/$new_ssport/; 36s/$ssciphers/$new_ssciphers/; 37s/$sspass/$new_sspass/; 45s/10000-20000/$port_range/" $v2ray_server_config
			;;
		esac

		case $v2ray_transport in
		6)
			sed -i "31s/none/utp/" $v2ray_server_config
			sed -i "44s/none/utp/" $v2ray_client_config
			;;
		7)
			sed -i "31s/none/srtp/" $v2ray_server_config
			sed -i "44s/none/srtp/" $v2ray_client_config
			;;
		8)
			sed -i "31s/none/wechat-video/" $v2ray_server_config
			sed -i "44s/none/wechat-video/" $v2ray_client_config
			;;
		13)
			sed -i "74s/none/utp/" $v2ray_server_config
			sed -i "44s/none/utp/" $v2ray_client_config
			;;
		14)
			sed -i "74s/none/srtp/" $v2ray_server_config
			sed -i "44s/none/srtp/" $v2ray_client_config
			;;
		15)
			sed -i "74s/none/wechat-video/" $v2ray_server_config
			sed -i "44s/none/wechat-video/" $v2ray_client_config
			;;
		esac
	elif [[ $shadowsocks ]]; then
		if [[ $v2ray_transport_opt ]]; then

			case $v2ray_transport_opt in
			1)
				sed -i "28s/6666/$ssport/; 30s/chacha20-ietf/$ssciphers/; 31s/233blog.com/$sspass/" $v2ray_server_config
				;;
			2)
				sed -i "50s/6666/$ssport/; 52s/chacha20-ietf/$ssciphers/; 53s/233blog.com/$sspass/" $v2ray_server_config
				;;
			3 | 4)
				sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/" $v2ray_server_config
				;;
			5 | 6 | 7 | 8)
				sed -i "43s/6666/$ssport/; 45s/chacha20-ietf/$ssciphers/; 46s/233blog.com/$sspass/" $v2ray_server_config
				;;
			9)
				sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/; 42s/10000-20000/$port_range/" $v2ray_server_config
				;;
			10)
				sed -i "67s/6666/$ssport/; 69s/chacha20-ietf/$ssciphers/; 70s/233blog.com/$sspass/; 78s/10000-20000/$port_range/" $v2ray_server_config
				;;
			*)
				sed -i "34s/6666/$ssport/; 36s/chacha20-ietf/$ssciphers/; 37s/233blog.com/$sspass/; 45s/10000-20000/$port_range/" $v2ray_server_config
				;;
			esac

			case $v2ray_transport_opt in
			6)
				sed -i "31s/none/utp/" $v2ray_server_config
				sed -i "44s/none/utp/" $v2ray_client_config
				;;
			7)
				sed -i "31s/none/srtp/" $v2ray_server_config
				sed -i "44s/none/srtp/" $v2ray_client_config
				;;
			8)
				sed -i "31s/none/wechat-video/" $v2ray_server_config
				sed -i "44s/none/wechat-video/" $v2ray_client_config
				;;
			13)
				sed -i "74s/none/utp/" $v2ray_server_config
				sed -i "44s/none/utp/" $v2ray_client_config
				;;
			14)
				sed -i "74s/none/srtp/" $v2ray_server_config
				sed -i "44s/none/srtp/" $v2ray_client_config
				;;
			15)
				sed -i "74s/none/wechat-video/" $v2ray_server_config
				sed -i "44s/none/wechat-video/" $v2ray_client_config
				;;
			esac

		else

			case $v2ray_transport in
			1)
				sed -i "28s/6666/$ssport/; 30s/chacha20-ietf/$ssciphers/; 31s/233blog.com/$sspass/" $v2ray_server_config
				;;
			2)
				sed -i "50s/6666/$ssport/; 52s/chacha20-ietf/$ssciphers/; 53s/233blog.com/$sspass/" $v2ray_server_config
				;;
			3 | 4)
				sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/" $v2ray_server_config
				;;
			5 | 6 | 7 | 8)
				sed -i "43s/6666/$ssport/; 45s/chacha20-ietf/$ssciphers/; 46s/233blog.com/$sspass/" $v2ray_server_config
				;;
			9)
				sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/; 42s/10000-20000/$port_range/" $v2ray_server_config
				;;
			10)
				sed -i "67s/6666/$ssport/; 69s/chacha20-ietf/$ssciphers/; 70s/233blog.com/$sspass/; 78s/10000-20000/$port_range/" $v2ray_server_config
				;;
			*)
				sed -i "34s/6666/$ssport/; 36s/chacha20-ietf/$ssciphers/; 37s/233blog.com/$sspass/; 45s/10000-20000/$port_range/" $v2ray_server_config
				;;
			esac

			case $v2ray_transport in
			6)
				sed -i "31s/none/utp/" $v2ray_server_config
				sed -i "44s/none/utp/" $v2ray_client_config
				;;
			7)
				sed -i "31s/none/srtp/" $v2ray_server_config
				sed -i "44s/none/srtp/" $v2ray_client_config
				;;
			8)
				sed -i "31s/none/wechat-video/" $v2ray_server_config
				sed -i "44s/none/wechat-video/" $v2ray_client_config
				;;
			13)
				sed -i "74s/none/utp/" $v2ray_server_config
				sed -i "44s/none/utp/" $v2ray_client_config
				;;
			14)
				sed -i "74s/none/srtp/" $v2ray_server_config
				sed -i "44s/none/srtp/" $v2ray_client_config
				;;
			15)
				sed -i "74s/none/wechat-video/" $v2ray_server_config
				sed -i "44s/none/wechat-video/" $v2ray_client_config
				;;
			esac

		fi

	else
		if [[ $v2ray_transport_opt ]]; then
			case $v2ray_transport_opt in
			9)
				sed -i "31s/10000-20000/$port_range/" $v2ray_server_config
				;;
			10)
				sed -i "67s/10000-20000/$port_range/" $v2ray_server_config
				;;
			11 | 12 | 13 | 14 | 15)
				sed -i "34s/10000-20000/$port_range/" $v2ray_server_config
				;;
			esac

			case $v2ray_transport_opt in
			6)
				sed -i "31s/none/utp/" $v2ray_server_config
				sed -i "44s/none/utp/" $v2ray_client_config
				;;
			7)
				sed -i "31s/none/srtp/" $v2ray_server_config
				sed -i "44s/none/srtp/" $v2ray_client_config
				;;
			8)
				sed -i "31s/none/wechat-video/" $v2ray_server_config
				sed -i "44s/none/wechat-video/" $v2ray_client_config
				;;
			13)
				sed -i "63s/none/utp/" $v2ray_server_config
				sed -i "44s/none/utp/" $v2ray_client_config
				;;
			14)
				sed -i "63s/none/srtp/" $v2ray_server_config
				sed -i "44s/none/srtp/" $v2ray_client_config
				;;
			15)
				sed -i "63s/none/wechat-video/" $v2ray_server_config
				sed -i "44s/none/wechat-video/" $v2ray_client_config
				;;
			esac

		else

			case $v2ray_transport in
			9)
				sed -i "31s/10000-20000/$port_range/" $v2ray_server_config
				;;
			10)
				sed -i "67s/10000-20000/$port_range/" $v2ray_server_config
				;;
			11 | 12 | 13 | 14 | 15)
				sed -i "34s/10000-20000/$port_range/" $v2ray_server_config
				;;
			esac

			case $v2ray_transport in
			6)
				sed -i "31s/none/utp/" $v2ray_server_config
				sed -i "44s/none/utp/" $v2ray_client_config
				;;
			7)
				sed -i "31s/none/srtp/" $v2ray_server_config
				sed -i "44s/none/srtp/" $v2ray_client_config
				;;
			8)
				sed -i "31s/none/wechat-video/" $v2ray_server_config
				sed -i "44s/none/wechat-video/" $v2ray_client_config
				;;
			13)
				sed -i "63s/none/utp/" $v2ray_server_config
				sed -i "44s/none/utp/" $v2ray_client_config
				;;
			14)
				sed -i "63s/none/srtp/" $v2ray_server_config
				sed -i "44s/none/srtp/" $v2ray_client_config
				;;
			15)
				sed -i "63s/none/wechat-video/" $v2ray_server_config
				sed -i "44s/none/wechat-video/" $v2ray_client_config
				;;
			esac

		fi

	fi

	sed -i "8s/2333/$v2ray_port/; 14s/$old_id/$v2ray_id/" $v2ray_server_config

	if [[ $v2ray_transport_opt -eq 4 || $v2ray_transport -eq 4 ]]; then
		sed -i "s/233blog.com/$domain/; 22s/2333/443/; 25s/$old_id/$v2ray_id/" $v2ray_client_config
	else
		[[ -z $ip ]] && get_ip
		sed -i "s/233blog.com/$ip/; 22s/2333/$v2ray_port/; 25s/$old_id/$v2ray_id/" $v2ray_client_config
	fi

	zip -q -r -j --password "233blog.com" /etc/v2ray/233blog_v2ray.zip $v2ray_client_config

	if [[ $new_shadowsocks ]]; then
		open_port $new_ssport
		sed -i "31s/false/true/; 33s/$ssport/$new_ssport/; 35s/$sspass/$new_sspass/; 37s/$ssciphers/$new_ssciphers/" $backup
	fi

	do_service restart v2ray
}
_boom_() {
	echo
	echo -e "$green ........... V2Ray 配置链接集合 by 233blog.com  ..........$none"
	echo

	create_v2ray_config_text >/tmp/233blog_v2ray.txt

	create_vmess_URL_config

	if [[ $obfs ]]; then
		if [[ $v2ray_transport == 4 ]]; then
			ip_or_domain=$domain
		else
			ip_or_domain=$ip
		fi
		local shadowray_qr="vmess://$(echo -n "aes-128-cfb:${v2ray_id}@${ip_or_domain}:${v2ray_port}" | base64)?remarks=233blog_v2ray_${ip_or_domain}&obfs=${obfs}"
		echo "${shadowray_qr}" >/etc/v2ray/shadowray_qr.txt
		sed -i 'N;s/\n//' /etc/v2ray/shadowray_qr.txt
	fi
	case $v2ray_transport in
	[1-4] | 9 | 10 | 11)
		local ios_qr=true
		local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
		cat /etc/v2ray/shadowray_qr.txt | qrencode -s 50 -o /tmp/233blog_shadowray_qr.png
		local link=$(curl -s --upload-file /tmp/233blog_shadowray_qr.png "https://transfer.sh/${random}_233blog_v2ray.png")
		;;
	esac
	local vmess="vmess://$(cat /etc/v2ray/vmess_qr.json | base64)"
	echo $vmess >/etc/v2ray/vmess.txt
	cat /etc/v2ray/vmess.txt | qrencode -s 50 -o /tmp/233blog_v2ray.png

	local random1=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
	local random2=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
	local random3=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
	local link1=$(curl -s --upload-file /etc/v2ray/233blog_v2ray.zip "https://transfer.sh/${random1}_233blog_v2ray.zip")
	local link2=$(curl -s --upload-file /tmp/233blog_v2ray.txt "https://transfer.sh/${random2}_233blog_v2ray.txt")
	local link3=$(curl -s --upload-file /tmp/233blog_v2ray.png "https://transfer.sh/${random3}_233blog_v2ray.png")

	if [[ $link && $link1 ]] && [[ $link2 && $link3 ]]; then
		echo -e "$yellow 客户端配置文件链接: $cyan$link1$none"
		echo
		echo -e "$yellow 配置信息链接: $cyan$link2$none"
		echo
		echo -e "$yellow V2RayN 二维码链接: $cyan$link3$none"
		echo
		echo -e "$yellow Pepi / ShadowRay 二维码链接: $cyan$link$none"
		echo
		echo "V2Ray 客户端使用教程: https://233blog.com/post/20/"
		echo
	else
		echo
		echo -e "$red 哎呀..发生了一点意外的情况.....请重试....$none"
		echo
	fi
	rm -rf /tmp/233blog_v2ray.txt
	rm -rf /etc/v2ray/vmess_qr.json
	rm -rf /etc/v2ray/shadowray_qr.txt
	rm -rf /tmp/233blog_shadowray_qr.png
	rm -rf /etc/v2ray/vmess.txt
	rm -rf /tmp/233blog_v2ray.png

}

get_ip() {
	ip=$(curl -s ipinfo.io/ip)
}

error() {

	echo -e "\n$red 输入错误！$none\n"

}

pause() {

	read -rsp "$(echo -e "按$green Enter 回车键 $none继续....或按$red Ctrl + C $none取消.")" -d $'\n'
	echo
}
do_service() {
	if [[ $systemd ]]; then
		systemctl $1 $2
	else
		service $2 $1
	fi
}
_help() {
	echo
	echo "........... V2Ray 管理脚本帮助信息 by 233blog.com .........."
	echo -e "
	${green}v2ray menu $none管理 V2Ray (同等于直接输入 v2ray)

	${green}v2ray info $none查看 V2Ray 配置信息

	${green}v2ray config $none修改 V2Ray 配置

	${green}v2ray link $none生成 V2Ray 客户端配置文件链接

	${green}v2ray textlink $none生成 V2Ray 配置信息链接

	${green}v2ray qr $none生成 V2Ray 配置二维码链接

	${green}v2ray ss $none修改 Shadowsocks 配置

	${green}v2ray ssinfo $none查看 Shadowsocks 配置信息

	${green}v2ray ssqr $none生成 Shadowsocks 配置二维码链接

	${green}v2ray status $none查看 V2Ray 运行状态

	${green}v2ray start $none启动 V2Ray

	${green}v2ray stop $none停止 V2Ray

	${green}v2ray restart $none重启 V2Ray

	${green}v2ray log $none查看 V2Ray 运行日志

	${green}v2ray update $none更新 V2Ray

	${green}v2ray update.sh $none更新 V2Ray 管理脚本

	${green}v2ray uninstall $none卸载 V2Ray
"
}
menu() {
	clear
	while :; do
		echo
		echo "........... V2Ray 管理脚本 $_version by 233blog.com .........."
		echo
		echo -e "## V2Ray 版本: $cyan$v2ray_ver$none  /  V2Ray 状态: $v2ray_status ##"
		echo
		echo "帮助说明: https://233blog.com/post/16/"
		echo
		echo "反馈问题: https://github.com/233boy/v2ray/issues"
		echo
		echo "TG 群组: https://t.me/blog233"
		echo
		echo -e "$yellow 1. $none查看 V2Ray 配置"
		echo
		echo -e "$yellow 2. $none修改 V2Ray 配置"
		echo
		echo -e "$yellow 3. $none下载 V2Ray 配置 / 生成配置信息链接 / 生成二维码链接"
		echo
		echo -e "$yellow 4. $none查看 Shadowsocks 配置 / 生成二维码链接"
		echo
		echo -e "$yellow 5. $none修改 Shadowsocks 配置"
		echo
		echo -e "$yellow 6. $none启动 / 停止 / 重启 / 查看日志"
		echo
		echo -e "$yellow 7. $none更新 V2Ray / 更新 V2Ray 管理脚本"
		echo
		echo -e "$yellow 8. $none卸载 V2Ray"
		echo
		echo -e "$yellow 9. $none其他"
		echo
		echo -e "温馨提示...如果你不想执行选项...按$yellow Ctrl + C $none即可退出"
		echo
		read -p "$(echo -e "请选择菜单 [${magenta}1-9$none]:")" choose
		if [[ -z $choose ]]; then
			exit 1
		else
			case $choose in
			1)
				view_v2ray_config_info
				break
				;;
			2)
				change_v2ray_config
				break
				;;
			3)
				download_v2ray_config
				break
				;;
			4)
				get_shadowsocks_config
				break
				;;
			5)
				change_shadowsocks_config
				break
				;;
			6)
				v2ray_service
				break
				;;
			7)
				update
				break
				;;
			8)
				uninstall_v2ray
				break
				;;
			9)
				other
				break
				;;
			*)
				error
				;;
			esac
		fi
	done
}
args=$1
[ -z $1 ] && args="menu"
case $args in
menu)
	menu
	;;
info)
	view_v2ray_config_info
	;;
config)
	change_v2ray_config
	;;
link)
	get_v2ray_config_link
	;;
infolink)
	get_v2ray_config_info_link
	;;
qr)
	get_v2ray_config_qr_link
	;;
ss)
	change_shadowsocks_config
	;;
ssinfo)
	view_shadowsocks_config_info
	;;
ssqr)
	get_shadowsocks_config_qr_link
	;;
status)
	echo
	echo -e " V2Ray 状态: $v2ray_status"
	echo
	;;
start)
	start_v2ray
	;;
stop)
	stop_v2ray
	;;
restart)
	restart_v2ray
	;;
log)
	view_v2ray_log
	;;
url | URL)
	get_v2ray_vmess_URL_link
	;;
update)
	update_v2ray
	;;
update.sh)
	update_v2ray.sh
	exit
	;;
uninstall)
	uninstall_v2ray
	;;
233 | 2333 | 233boy | 233blog | 233blog.com)
	_boom_
	;;
bbr)
	other
	;;
help | *)
	_help
	;;
esac