This fork is identical to the original SSDV program, except the packets are 128 bytes instead of 256 bytes for the GASPACS CubeSat.

SSDV - simple command line app for encoding / decoding SSDV image data

Created by Philip Heron <phil@sanslogic.co.uk>
http://www.sanslogic.co.uk/ssdv/

A robust packetised version of the JPEG image format.

Uses the Reed-Solomon codec written by Phil Karn, KA9Q.

ENCODING

$ ssdv -e -c TEST01 -i ID input.jpeg output.bin

This encodes the 'input.jpeg' image file into SSDV packets stored in the 'output.bin' file. TEST01 (the callsign, an alphanumeric string up to 6 characters) and ID (a number from 0-255) are encoded into the header of each packet. The ID should be changed for each new image transmitted to allow the decoder to identify when a new image begins.

The output file contains a series of SSDV packets, each packet always being 128 bytes in length. Additional data may be transmitted between each packet, the decoder will ignore this.

DECODING

$ ssdv -d input.bin output.jpeg

This decodes a file 'input.bin' containing a series of SSDV packets into the JPEG file 'output.jpeg'.

LIMITATIONS

Only JPEG files are supported, with the following limitations:

 - Greyscale or YUV/YCbCr colour formats
 - Width and height must be a multiple of 16 (up to a resolution of 4080 x 4080)
 - Baseline DCT only
 - The total number of MCU blocks must not exceed 65535

INSTALLING

make

TODO

* Allow the decoder to handle multiple images in the input stream.
* Experiment with adaptive or multiple huffman tables.