-
Notifications
You must be signed in to change notification settings - Fork 0
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
CN_WIRED and offline #14
Comments
With mqtt explorer I got this: |
I have the same issue, but the web interface updates went key presses from remote are received. I put my scope on the RX and TX lines , RX is getting input from the CN_WIRED port on the unit, but nothing is ever send out on the TX line of the ESP32. Changed to different GPO, different setting in advance page, same results...how to correct? |
Hi @fisiomacao did you have any progress with this? I’m also just getting system offline. |
Ok so I figured maybe my esp32 device was bad or non compatible in some way, so I switched to a ESP8286 device "ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes" and uploaded set TX = 1 RX = 3, selected only CN-WIRE for protocol and it is working! So not sure if its the hardware or the firmware...To add to working list, my unit is FTXB18AXVJU |
So, I'm trying to use it with a wemos d1 mini. I used pins 5V, GND, RX and TX (TX from AC connecting to RX in ESP, RX to TX). It was causing this issue. I read somewere else that UART pins weren't those, and read I should use GPIO2 for RX and GPIO4 for TX. It became online, but doesn't read anything nor send info to the device. |
wemos d1 mini is the same type of board I am using. TX =1 and RX = 3 should make it connect. Also the TX/RX pins might be hard-coded in the firmware due the chip has no other option so the web setting probably does nothing...I had some issues before but when I re-flashed the unit with a full erase it worked. Full erase command Program command |
Yes, you're absolutely correct, and i even removed it from recent version (under testing, not released yet). Pins aren't reprogrammable; and even uart1 isn't usable because it doesn't have rx; so the only option is uart0 on pins 1 and 3. Make sure that cn_wired protocol is enabled. Setting could default to 0 from old version. |
If the problem persists; then:
|
Hi @Sonic-Amiga, I am encountering an same issue (intermittent system status offline/online) with my ESP8266 Faikin setup. Below are the details of my configuration and the problem I am facing: Configuration: I have configured my device with the following MQTT settings:
However, I am receiving an error in some of the messages:
Despite this error, I am able to see the state updates and other information being published to the MQTT broker. Here are some of the state messages:
I have verified the MQTT messages and confirmed that they are received correctly in Home Assistant. Note : Despite the intermittent errors, I am still able to control the AC through Web/Home Assistant, including turning it on/off, setting the temperature, and changing modes. |
Some conditioners also emit packets of new types, which also have modified CRC algorithm. Support checksum calculation properly so that the connection isn't broken. Unfortunately we can only ignore these packets for now because we have no idea what they mean. Should solve #14
Hello! I have updated the file in "release" directory, please test. Your problem should be solved. Your conditioner sends some additional data in new format, which Faikin did not understand.
Unfortunately i don't have my own public update server. I push releases to RevK so that they are available at revk.uk, but that comes with a delay; plus i'd like them to be tested. You can roll your own server in order to use OTA; or you can reflash the board via serial port if you aren't lazy. Sorry for that. |
Hi @Sonic-Amiga I’ve tested the updated file and it’s working perfectly. My AC model is FTKG50T. I’ve also hosted your firmware on my web hosting, which can be accessed here: http://faikin-ota.home-assistant.my Thank you for the update! |
Thank you for support and testing. I'm happy my work is useful for someone else. |
BTW, how reliable is your server ? Can i make it my official update path ? In such case i'd need some access to this dir to be able to upload files. |
I can ensure it’s reliable! 😊 Sure, I’m happy with that. You can make it your official update path. Please let me know how you would like me to provide access to the directory for uploading files, and I’ll set it up for you. |
I don't care. Could be FTP, WebDav, SCP, whatever that would work for you best. |
sorry for hijacking this topic, but i wanted to upgrade, but is is not working? Ow nevermind, i have the esp32 faikin board for my ftxb50cv would it be ok if i buy one of these boards? which one can you recomend? |
Just paid attention to that. :) |
@LowKey88 Hello again! Three weeks ago we've been talking about setting up an update server, and you silenced. |
@Sonic-Amiga send me your email. I will send out the credentials. |
pavel_fedin <at> mail.ru
…On Jul 31, 2024, 02:19, at 02:19, LowKey ***@***.***> wrote:
@Sonic-Amiga send me your email. I will send out the credentials.
--
Reply to this email directly or view it on GitHub:
#14 (comment)
You are receiving this because you were mentioned.
Message ID:
***@***.***>
|
OK done |
Everything works fine, closing. |
Hello.
I get this image with "system is off line" intermittently, it changes every second. And can't do anything with it. Help? Or can someone guide me to throubleshoot this?
Thanks.
The text was updated successfully, but these errors were encountered: