Can I use this libary to sniff 868Mhz protocol with CC1101

[guitar9]

Can I use this libary to sniff 868Mhz protocol with CC1101 ?
I want to reverse engineering the protcol of a MAX! Thermostat.
I have a arduino mega 2560. I dont know how to do this. Is there a instruction how to use this libary and how to do the wiring?

This is my CC1101:

[SpaceTeddy]

i'm not sure if it is possible to sniff signals. with my demo settings it is not possible, because the cc1101 is listening to dedicated addresses and need a specified packet length.
But, as I remember right, the CUL Stick, which is used for the fhem home automation system can already listen to MAX! and has also a cc1101 on board.

[esdad697]

No, it is not a sniffer. If you knew the protocol, this library might provide a starting point to read it. Often you can find the protocol on the web. Also, RTL-SDR can be used to capture the signal. You could then view the signal and figure out the encoding.

…

On Sat, Mar 16, 2019, 3:18 PM SpaceTeddy ***@***.***> wrote: i'm not sure if it is possible to sniff signals. with my demo settings it is not possible, because the cc1101 is listening to dedicated addresses and need a specified packet length. But, as I remember right, the CUL Stick, which is used for the fhem home automation system can already listen to MAX! and has also a cc1101 on board. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#35 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AB8wdbAmBBcUMVEpaIUk2RW_Nj9J1ztBks5vXUN9gaJpZM4b3zU0> .