West Mountain Radio EPIC PWRgate Mods
West Mountain Radio EPIC PWRgate Reporting Tool
Attached to Serial/dev/ttyACM0 Telemetry data:
Batterv 13.16V.0.00A Power Supolv 13.99v Status Trickle Solar Voltage 0.04V
$ python3 PWRgate-Status.py
/dev/ttyACM0 at 9600 baud
on connect to device it will typically catch the letter 's' string which puts you into setup, handles escaping the menu and handles parsing of data for some other funky text output bugs in firmware
- sol value has extra space
- battery value has extra space
- unplug power supply and the output is ugly so we clean that up
Tested on the following firmware on raspberry pi woith python 3
West Mountain Radio EPIC PWRgate R2 1.32
Press S to Review/Edit Charge settings
Because jumper is installed changes will be reset on next power cycle.
Battery: 1-Disable, 2-Gel, 3-AGM, 4-LiFePo4, 5-Other: <0>:
Max charge voltage in Volts: <14.40>:
Max charge current in Amps: <9.98>:
Min charge current in Amps: <0.25>:
Trickle current in Amps: <0.15>:
Trickle voltage in Volts: <13.55>:
Recharge voltage in Volts: <12.10>:
Max charge (minutes): <1500>:
Min charger idle (minutes): <60>:
Min supply voltage for charging in Volts: <12.99>:
Battery Save Mode (Y,N) < N >?
- In Go! Language https://github.com/arodland/pwrgate-monitor