AD still will not drive under auger

[GTA3Fan]

NOTE: I saw the other thread and saw it was closed and wasn't sure if my reply there notified anyone.

Just got back to game after a few months and noticed tractor wouldn't drive under auger wagon chute. Searched and found this apparently has been fixed on 0.7.

I updated and it started to drive under auger but then stopped before chute. I readjusted driving points and now it won't even go near it.

0.6

0.7

[ninjatrig]

I have the same issue. Even with collision detection off it still won't drive under arms or conveyer belts no matter the vehicle. Silos pipes are fine and sometimes arms/belts will randomly be friendly but something's definitely wrong.

[FarmerMoe]

I have the same issue when I try to use the default Walkabout WMB 4000. In prior versions I was able to use the Walkabout and AD without any issues.

[Williwillswisse]

Try this:

• enter the vehicle with the auger wagon
• fold the pipe
• leave with "E"
• enter with "E"
• unfold the pipe
• leave with "E" and do not enter the vehicle again
• start your tractor and test

[ninjatrig]

Try this:

• enter the vehicle with the auger wagon
• fold the pipe
• leave with "E"
• enter with "E"
• unfold the pipe
• leave with "E" and do not enter the vehicle again
• start your tractor and test

Edit: AFTER a bunch of edits and testing I can confirm this works. If you have a tight opposing path that tractors have to take in order to get to the auger fill (huge fields with a bunch of turnarounds) then I'd suggest giving the opposing path a wider birth. On the off-chance that a tractor is in the wrong place at the right time and it is empty it will detect the auger unload from the opposing lane, stop and block tractors in the same lane as the load point because of the load detection being too large for reasonably compact lane.

[big-horn73]

I’m having this issue as well. Version 0.5 worked correctly.

[Iwan1803]

https://github.com/Stephan-S/FS22_AutoDrive/releases/download/2.0.0.9/FS22_AutoDrive.zip