dwc2-for-klipper-socket

This is a rewrite of dwc2-for-klipper. As Klipper offers now a unixsocket API, its time to use it and run outside klippers main thread.

Things you should know

• It works everywhere where klipper works, not only with duet boards
• Klipper is not RepRapFirmware
• This is a translator between klipper and Duet Web Control
• The DWC service can be restarted at any time without restarting klipper
• Sometimes buttons get a bad response - especially macros
  • Usually a timing issue
  • Make sure action gets performed
  • Set AJAX retries to 0 for now:
    • Settings > Machine-Specific > Number of maximum AJAX retries
• There is a configfile now
• Klipper's printer.cfg is displayed as a virtual file (config.g) in system section
  • Restart after configuration edits works
• The macros you define in printer.cfg are displayed as virtual files wthin DWC's macros/klipper folder
• For pause and resume macros you can use:
  • Klipper gcode macros pause_print, resume_print, cancel_print (not case sensitive)
  • DWC macros pause.g, resume.g, cancel.g - this is in line with RRF
  • DWC macros are overriding Klipper's macros

Installation

@th33xitus made a installer, see: Installer

Klipper needs to run with an additional arg -a /tmp/klippy_uds

This is my klipper systemd service located at /etc/systemd/system/klipper.service

[Unit]
Description=klipper printer service
After=network.target

[Service]
User=pi
Group=pi
ExecStart=/usr/bin/python2 /home/pi/klipper/klippy/klippy.py /home/pi/printer.cfg -l /tmp/klippy.log -a /tmp/klippy_uds
WorkingDirectory=/root/klipper

[Install]
WantedBy=multi-user.target

---- todo add /etc/default here ----

Make sure klipper is up and running with unixsocket enabled before next steps.

# clone this repo:
cd ~
git clone https://github.com/Stephan3/dwc2-for-klipper-socket
pip3 install tornado

# get dwc:
mkdir -p ~/sdcard/web
cd ~/sdcard/web
wget https://github.com/Duet3D/DuetWebControl/releases/download/v3.2.2/DuetWebControl-SD.zip
unzip *.zip && for f_ in $(find . | grep '.gz');do gunzip ${f_};done
rm DuetWebControl-SD.zip

dwc2-for-klipper-socket can run with systemd too. Here is the service I use for it, located at /etc/systemd/system/dwc.service

[Unit]
Description=dwc_webif
After=klipper.service

[Service]
ExecStart=/usr/bin/python3 /home/pi/dwc2-for-klipper-socket/web_dwc2.py
WorkingDirectory=/home/pi/dwc2-for-klipper-socket

[Install]
WantedBy=multi-user.target

Please make sure that all paths matching your setup.

You might want to reload your services with systemctl daemon-reload The webinterface can be launched by systemctl start dwc and enabled at startup systemctl enable dwc