The EtherBear is an Arduino compatible development board for the ATmega1284P microcontroller, with a Wiznet W6100 Ethernet interface and Power-over-Ethernet support.
The W6100 provides both IPv4 and IPv6 support.
Features:
- LEDs visible on the edge
- USB-C Connector
- I2C MAC address ROM
- Overlay guide where you need it (both top and bottom)
- D13 pin works for everything
- RX pin biased
- Mounting holes
More information is available at:
https://www.superhouse.tv/etherbear
The "Hardware" directory contains the PCB design as an EAGLE project. EAGLE PCB design software is available from Autodesk free for non-commercial use.
- Jonathan Oxer jon@oxer.com.au
The EtherBear is based on the EtherUNO, which in turn is based on the EtherTen, which was designed by Jonathan Oxer and Marc Alexander.
Copyright 2020 SuperHouse Automation Pty Ltd www.superhouse.tv
The hardware portion of this project is licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" folder within this repository contains a copy of this license in plain text format.