Home
Control your KNX intallation via Node-Red! A bunch of KNX nodes, with integrated Philips HUE control and ETS group address importer. Easy to use and highly configurable.
Tip
I'm putting many effort, money and free time to this node, so please consider MAKING A LITTLE DONATION if you're using KNX-Ultimate. Thanks!
Please subscribe to the Youtube channel and watch the node in action.
Instead of create a knx device node for each Group Address to control, you can import your ETS csv group addresses file. Thanks to that, the knx device node where you selected Listen to all Group Addresses, becomes an universal input/output node, aware of all Datapoints, Group Addresses and Device's name (ex: Living Room Lamp). Just send the payload to the knx-ultimate node, and it'll encode it with the right datapoint and send it to the bus. Likewise, when the knx-ultimate node receives a telegram from the bus, it outputs a right decoded payload using the datapoint specified in the ETS file.
You can work with a mix of knx-ultimate nodes, some with Listen to all Group Addresses checked and some not. You are absolutely free! See this youtube video,
