Support for new Xiaomi Robot Vacuum X20+

[stich86]

Can you please add support for Xiaomi Robot Vacuum X20+?
It's the twin of Dreame L10s Ultra

Currently when I add new account, it says that no robot has been found.

Thanks in advance

[Tasshack]

Which version are you using? Also I need the full model number.

[stich86]

here is it: xiaomi.vacuum.c102gl
firmware version: 4.3.9_1066

[Tasshack]

I cannot access the miot right now to check it but that device probably not manufactured by Dreame therefore cannot be used with this integration.
I will notify you when miot-stats will be availabile again.

[Tasshack]

I can add it to the supported devices list if I can confirm that this is actually the same device with the L10s Ultra as you claimed.

[stich86]

here is it: xiaomi.vacuum.c102gl

i've tried to add it to config_flow.py , but when it sends token there is no response from the device :(

[Tasshack]

here is it: xiaomi.vacuum.c102gl

i've tried to add to config_flow.py , but when it send token there is no response from the device :(

You need to select Prefer Cloud Connection since Dreame has disabled the local api recently. Also adding it to the config flow would not be enough since integration requires private key of the map for decoding it. Also if your are using the Beta, integration would require model capabilities to work properly.

[stich86]

here is it: xiaomi.vacuum.c102gl

i've tried to add to config_flow.py , but when it send token there is no response from the device :(

You need to select Prefer Cloud Connection since Dreame has disabled the local api recently. Also adding it to the config flow would not be enough since integration requires private key of the map for decoding it. Also if your are using the Beta, integration would require model capabilities to work properly.

ok, i'll wait your feedback if it's possible to add or not
thanks :)

[Tasshack]

You can at least try to add the device using the Beta version of the integration by adding it to the config flow but just to confirm that this is a Dreame device. But remove it just after the confirmatiun to not to break anything until the new version is available.

[Tasshack]

I would be very nice if you enable the info logs and share me too.

[stich86]

You can at least try to add the device using the Beta version of the integration by adding it to the config flow but just to confirm that this is a Dreame device. But remove it just after the confirmatiun to not to break anything until the new version is available.

i've seen that in the latest beta13 there was xiaomi.vacuum.c102cn, this one is c102gl (I presume global version because it's sold in Italy)

Which flags do I need to enable debug? It's not a problem for me to share logs :)

[stich86]

ok looks like it attach after change c102cn to c102gl and use cloud connection (some items are missing, may be because not fully supported) - for instance, this version doesn't have detergent tank:

[Tasshack]

Yeah it is the same device with same firmware but its model name still needs to be in the keystore list otherwise you cannot use the map function.

I won't be releasing a new version soon but I can send you the files need to be changed to make this device properly when I am available in couple of days.

[stich86]

Yeah it is the same device with same firmware but its model name still needs to be in the keystore list otherwise you cannot use the map function.

I won't be releasing a new version soon but I can send you the files need to be changed to make this device properly when I am available in couple of days.

that sounds good :)

i'm waiting your info, ATM i've added it so I can use basic command :)

[Tasshack]

You can use basic services like start, stop but i don't recommend changing any setting because robot does not have checks for any wrong parameter and everything is only limited by the app. So if you try to change a setting on a device that does not support it, it still tries to do the related work and may break things with the operation.
As you already see, it still advertises the detergent settings even it does not have it, thats why integration needs to know capabilities of each model.

[alexflcl]

Also looking for these archives or implementation. Receiving mine in 3 days.

Thank you!

[joseluislucio]

Another one waiting for the X20+ integration :)

[gabriel-gfs]

Also patiently waiting for the integration 😊

[mc-flash]

Last week Xiaomi started to sell the X20+ in Germany and I'm sure many guys are now waiting for the updated integration.

Thanks in advance @Tasshack

[papst01]

Got mine yesterday. Also waiting to get the integration working. Thx in advance

[radim-ek]

miot-spec : https://home.miot-spec.com/spec/xiaomi.vacuum.c102gl
Can I help with add this device? Thanks.

[martindybal]

@Tasshack @radim-ek Hi, I just got mine. I'm a developer so I can help with testing or development. Does anyone working on it?

[gunnm80]

ok. Thank you. Let me know if there is anything I can do to help.
Is Ko-Fi not an issue for you?

[privedentsev]

@Tasshack очень ждем интеграцию от Вас! Огромное спасибо за Ваши труды!

[Tasshack]

Support for xiaomi.vacuum.c102gl has been added on latest Beta release.
https://github.com/Tasshack/dreame-vacuum/releases/tag/v2.0.0b15

[Tasshack]

ok. Thank you. Let me know if there is anything I can do to help. Is Ko-Fi not an issue for you?

https://www.ko-fi.com/Tasshack

[privedentsev]

@Tasshack My card doesn't work.

[gunnm80]

So the commands such as “Start Fast Mapping” or “Start Mapping” work for me. This morning I briefly had a map under the “Current Map” entry after “Start Fast Mapping”. But unfortunately not the complete map and unfortunately it has disappeared again.
What also works well are the current values and statuses such as “Charging Status” or “Task Status”.

[mc-flash]

I am not familiar with this, what is the modification?

Modified app can handle all region locked Xiaomi devices on the same server. I have STYJ02YM vacuum, chinese version. With this app I can use it on German server.

I thought we could maybe log the traffic in the app to take a look where in the cloud the map is stored. Just an idea of a salesman :)

[Tasshack]

Modified app can handle all region locked Xiaomi devices on the same server. I have STYJ02YM vacuum, chinese version. With this app I can use it on German server.

This may be the reason why the integration is not working so I need to know what modification has been made to the app but I really don't have time for this right now also most of the information about the modified app is in Russian so I won't be installing it to any of my devices.

I thought we could maybe log the traffic in the app to take a look where in the cloud the map is stored.

Good luck logging an ssl encrypted traffic on a recent mobile OS.

[privedentsev]

причиной

Modified app can handle all region locked Xiaomi devices on the same server. I have STYJ02YM vacuum, chinese version. With this app I can use it on German server.

This may be the reason why the integration is not working so I need to know what modification has been made to the app but I really don't have time for this right now also most of the information about the modified app is in Russian so I won't be installing it to any of my devices.

I thought we could maybe log the traffic in the app to take a look where in the cloud the map is stored.

Good luck logging an ssl encrypted traffic on a recent mobile OS.

У меня прекрасно все работает в родном приложении, не только карты. Весь функционал ведет себя правильно.
Версия пылесоса gl, регион MiHome - RU

[Tasshack]

@privedentsev if you won't be using English please don't write anything.

[privedentsev]

@Tasshack I tested an HA vacuum cleaner with this integration.
All functionality of the vacuum cleaner works perfectly.
I have the native MiHome application, vacuum cleaner GL version, region RU

[privedentsev]

@Tasshack I also added a vacuum cleaner to the Miot integration, but there it is limited in functionality

[Tasshack]

I need full log output from a not working device.

logger:
  default: warn
  logs:
    custom_components.dreame_vacuum: debug

[Tasshack]

Fastest way for me to fix this issue is reproducing it on my setup and for that I need someone willing to share their device with my MiHome account.

[privedentsev]

Fastest way for me to fix this issue is reproducing it on my setup and for that I need someone willing to share their device with my MiHome account.

I'm ready, what should I do?

[stich86]

Fastest way for me to fix this issue is reproducing it on my setup and for that I need someone willing to share their device with my MiHome account.

I can share mine if you want, just don't start it during the night 😂

[Tasshack]

I won't be controlling the device in anyway. I just try to make it get the map data object name and file.

Account ID: 1724225515

[stich86]

1724225515

Shared let me know (it's called Duster 😅)

[Tasshack]

@stich86 got the access, reproduced the issue, understand the reason and fixed it. Thanks

Turns out the changes that I have made for 102cn version to work correctly causes map data to not to be retrieved on EU model because CN version uses the V3 and latest version of the cloud storage access endpoint but I didn't know that the EU model still uses old cloud api.
I will make the changes for integration use V3 api endpoints only when connected to the CN server but I need to make sure this is not a firmware version related issue and won't be changed after a firmware upgrade.

@stich86 app says there is a new version of the firmware available, is that a specific reason that you did not upgrade your device or can I start upgrade to make sure integration still be working fine after the upgrade especially with the changes I have made now?

[stich86]

If you want to test proceed to upgrade. No problem for me :)

I need to make sure the device still be using the old storage cloud api after the upgrade otherwise integration won't be working again like now after my fix.

[Tasshack]

@stich86 I cannot see the firmware upgrade menu in settings because I am not the owner of the device. App asked me when I have first added the device but I cannot upgrade it now since I have dismissed that popup. Can you start upgrade from your app?

[stich86]

Ok I'll send you a msg here when upgraded

[stich86]

@stich86 I cannot see the firmware upgrade menu in settings because I am not the owner of the device. App asked me when I have first added the device but I cannot upgrade it now since I have dismissed that popup. Can you start upgrade from your app?

Ok it's updated let me know

[Tasshack]

It's upgraded and still working fine with my fix. Thanks for the help.

[stich86]

I'll keep it shared until you have fixed and test all stuff, let me know. For me isn't a problem ;)

[mc-flash]

Guys, you are awesome!!

[Tasshack]

I'll keep it shared until you have fixed and test all stuff, let me know. For me isn't a problem ;)

@stich86 I don't need the access anymore but I have noticed some very important differences within the app from the Dreame variant of this device. For example; Dreame app has one more option for both mopping prefences and setting the one that does not present in the Mi Home app may break the operation of the device since we cannot make sure why those options are discarded from the same hardware from different brand. Because of that, I would like to address those differences in the integration too when I have the time working on it agai so it would be very nice to keep the access for that time. Your device is only installed on my dev machine and that device is only running while I am developing.

[Tasshack]

I have commited the fix but I won't be releasing a new version soon so anyone who don't want to wait this issue to be closed with the new release can download and override this file manually with the custom_components/dreame_vacuum/dreame/protocol.py one.

[stich86]

I'll keep it shared until you have fixed and test all stuff, let me know. For me isn't a problem ;)

@stich86 I don't need the access anymore but I have noticed some very important differences within the app from the Dreame variant of this device. For example; Dreame app has one more option for both mopping prefences and setting the one that does not present in the Mi Home app may break the operation of the device since we cannot make sure why those options are discarded from the same hardware from different brand. Because of that, I would like to address those differences in the integration too when I have the time working on it agai so it would be very nice to keep the access for that time. Your device is only installed on my dev machine and that device is only running while I am developing.

No problem, let me know if you need something else :)

[stich86]

I have commited the fix but I won't be releasing a new version soon so anyone who don't want to wait this issue to be closed with the new release can download and override this file manually with the custom_components/dreame_vacuum/dreame/protocol.py one.

I have commited the fix but I won't be releasing a new version soon so anyone who don't want to wait this issue to be closed with the new release can download and override this file manually with the custom_components/dreame_vacuum/dreame/protocol.py one.

so that version make Maps work? Thx!

[wmnl25]

Amazing work guys! Can confirm this version now displays a map :)!

[papst01]

Awesome work. Can also confirm (gl-version in region DE) that the map is working with the adapted protocol.py file without any rooting or whatsoever