#MK2i Heated Build Platform This repository contains the PCB design files for the MK2i PCB Heated Build Platform for 3D Printers.
##Features The MK2i PCB heated build platform is a hybrid of the open-source MK2a and MK3 PCB heatbed. Revisions and features in the MK2i design include:
- Large pads for soldering power wires (from MK2a).
- Pads for SMD or through-hole thermistor on top and bottom. PCB trace on top layer for wiring soldered thermistor. Still has thermistor center-hole. Use with many types of thermistor. Improved wire strain relief with much less kapton tape or other material.
- 4-point and 3-point mounting for PCB to platform.
- 1206 pads for LEDs and SMD resistor; also support through-hole components.
- Open source design based on proven MK2a and MK3 designs.
- Cleaned up outer trace in MK2a design.
- Designed for 1.0-1.2 ohm resistance.
This repo contains the CAD file for the MK2i PCB heated. You will need to generate a Gerber. You will need the library to use this PCB design file and to generate GERBER output.
In this distribution the Terawatt logo has been removed. The Terawatt Industries logo is copyright - you must obtain permission to use this logo.