- Navigating the Repository
- Change Log
- Installation
- Required Tools
- Examples List
- References
- FAQ
- Versioning Proprietary Projects
These examples and demos are for TI SimpleLink CC13X2 / CC26X2 SDK 3.30.00.
This repository contains proprietary radio sample applications for Texas Instruments' SimpleLink CC13X2 / CC26X2 SDK. These examples have not been validated as production-ready.
Do not use GitHub's bug tracking feature for support. For inquiries, see the forum relevant to your device and application:
To use the examples and tools in this repository, please download and install the SimpleLink CC13X2 / CC26X2 SDK first, and if necessary buy an evaluation kit.
If you have any questions please refer to the FAQ page.
For other SDK versions and platforms, refer to the table below.
| SDK | Version | Tag |
|---|---|---|
| SimpleLink CC13x2 / CC26x2 SDK | 3.30.00 | simplelink_cc13x2_26x2_sdk-3.30.00.00 |
| SimpleLink CC13x2 / CC26x2 SDK | 3.10.00 | simplelink_cc13x2_26x2_sdk-3.10.00.00 |
| SimpleLink CC13x2 / CC26x2 SDK | 2.40.00 | simplelink_cc13x2_26x2_sdk-2.40.00.00 |
The examples provided on this GitHub page serve as a plugin to a corresponding device SDK release. The master branch will always point to the latest release.
Older releases can be accessed by checking out/downloading their corresponding branch. For more information on supported examples please consult the README.md of the desired branch/release.
For more information about different SDK components, please consult the SDK documentation.
Note: The version numbers below are related to GitHub proprietary_examples releases. The numbering scheme is in the form of M.mm.pp.bb. The fields pp.bb are incremented as GitHub examples are released, M.mm will map a GitHub release to a SimpleLink SDK release.
Ported examples from SDK version 3.10.00 to 3.30.00:
- RF Sensor and Collector
Ported examples from SDK version 2.40.00 to 3.10.00:
- RF Sensor and Collector
This repository can be cloned/download anywhere on your computer. There is a dependency between this repository and the SimpleLink CC13x2 / CC26x2 SDK install location.
By default the SDK will install to:
C:\ti\simplelink_cc13x2_26x2_sdk_{version}
If the SDK must be installed to a different location, then see the FAQ page for IDE specific instructions for changing environment variables.
The examples in this repository currently only support the CCS toolchains. Please refer to the release notes for the supported versions of each toolchain. Using a non-supported version is untested and may result in unexpected behavior.
For more information on toolchain setup, please refer to our FAQ page.
The FAQ page will try to address some of the common questions related to the proprietary_examples repo.
A synchronous RF Sensor and Collector implementation using a proprietary time-slotted radio protocol.
-
rfSensor
-
rfCollector
The following reference pages may be helpful during general development using the TI SimpleLink SDK. Users developing proprietary RF applications are encouraged to read the Proprietary RF User's Guide.
As an additional resource, users are encouraged to complete the SimpleLink Academy training.