ESP32 Blue Light Blinking !!Help Please!! #69
Comments
|
Good morning,
Some questions…
What does the serial monitor say? Keep your ESP32 plugged into the PC when you start it…serial monitor will state errors.
***@***.***
What version of software are you using?
Do you have the battery protection activated (3_ESC tab)?
***@***.***
I can see from your video that your ESC is plugged into the wrong position (not Ch1, needs to go to ESC.)
***@***.*** ***@***.***
Also plug in a speaker when you make the next video please.
Regards,
Frikkie
INTERNAL
From: RS33D ***@***.***>
Sent: Friday, March 15, 2024 8:33 AM
To: TheDIYGuy999/Rc_Engine_Sound_ESP32 ***@***.***>
Cc: Subscribed ***@***.***>
Subject: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Hello
Your ESP32 engine sound project is very nice, currently trying to put it into my 3d printed 1/14 scale kenworth
But i have an issue with the circuit board not working, please see the below google drive video
https://drive.google.com/file/d/1ZZUraMMt_CvwXIOm6ZMI8HmvmG5yAJjD/view?usp=sharing<url>
I have not adjusted the code as i want to use Sbus so just loaded the code up, but as per the video you can see that when turned on the blue light just flashes
i have adjusted the settings on the remote i am using which is a Flysky FS i6x and has its serial output set on S Bus, the receiver is also s bus compatible, i am using a flysky ia10b s receiver
i have also tried ibus, PWM and PPM and all result in the same issue
What have i done wrong??
your help would be much appreciated
many thanks
Lawson
—
Reply to this email directly, view it on GitHub<#69>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQZMZYVPOENBQI6HQE3YYKI2RAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43ASLTON2WKOZSGE4DOOBSGA4DCOA>.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.******@***.***>>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Okay, thanks for your reply Here is what the serial monitor says TheDIYGuy999 RC engine sound & light controller for ESP32 software version 9.12.0 EEPROM read. Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection required!ENABLE_WIRELESS option enabled Informations for web configuration via your cell phone or computer ******************************* WiFi Tx Power Level: 78 The following trailers are currently enabled:
|
|
Good morning,
If you have not fitted the battery protection resistors on the back of the card, keep the // in place.
I also noticed that you have not powered the card through a y-lead from your battery.
[cid:25BAFFE4-087B-4324-B895-A9AD3ACF2061]
[cid:79CB54DC-D45A-427A-A690-8C273FBEAAEE]
I also do not see a speaker connected for the sound.
Regards,
Frikkie
From: "RS33D" ***@***.******@***.***>>
Date: Friday, 15 March 2024 at 22:59:53
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Okay, thanks for your reply
Here is what the serial monitor says
…________________________________
TheDIYGuy999 RC engine sound & light controller for ESP32 software version 9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully: https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 12: SW_CPU_RESET
Core 1 reset reason: 12: SW_CPU_RESET
________________________________
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection required!
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer *******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 28
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
________________________________
Regarding the software i am using
Ardunio IDE is 1.8.15
Diyguy999 code version i am using is 9.12.0
No, i have not removed the \ from battery protection, so I am assuming it is not activated
Please see the below video for when battery protection is enabled (ie \ removed)
https://drive.google.com/file/d/1QNNL5fuSMhIF74WCbjhMlbAaCGyKIKRQ/view?usp=sharing<url>
When battery protection is enabled, serial monitor will say this once, even if i am running it off my 2s lipo battery and just have the usb cord plugged into my computer
________________________________
TheDIYGuy999 RC engine sound & light controller for ESP32 software version 9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully: https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289272 Byte, Free: 263856 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 1: POWERON_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
Battery protection calibration data:
RESISTOR_TO_BATTTERY_PLUS: 10000 Ω
RESISTOR_TO_GND: 1000 Ω
DIODE_DROP: 0.00 V
________________________________
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Battery voltage: 1.58 V
Cutoff voltage per cell: 3.30 V
Fully charged voltage per cell: 4.20 V
Error, no valid battery detected! Only 2S & 3S batteries are supported!
REMOVE BATTERY, CONTROLLER IS LOCKED = 2 FAST FLASHES!
thanks for your comments so far.
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ4IJZXG5WHAHUDIQOLYYNOK7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBQGQZTCOJWGM>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Okay, should I be taking power from the battery to the esc as well as the
screw terminals on the circuit board?, is that what you mean by powering
through a y lead from the battery
…On Sat, 16 Mar 2024, 5:59 pm FBester1976, ***@***.***> wrote:
Good morning,
If you have not fitted the battery protection resistors on the back of the
card, keep the // in place.
I also noticed that you have not powered the card through a y-lead from
your battery.
[cid:25BAFFE4-087B-4324-B895-A9AD3ACF2061]
[cid:79CB54DC-D45A-427A-A690-8C273FBEAAEE]
I also do not see a speaker connected for the sound.
Regards,
Frikkie
From: "RS33D" ***@***.******@***.***>>
Date: Friday, 15 March 2024 at 22:59:53
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Okay, thanks for your reply
Here is what the serial monitor says
________________________________
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 12: SW_CPU_RESET
Core 1 reset reason: 12: SW_CPU_RESET
________________________________
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 28
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
________________________________
Regarding the software i am using
Ardunio IDE is 1.8.15
Diyguy999 code version i am using is 9.12.0
No, i have not removed the \ from battery protection, so I am assuming it
is not activated
Please see the below video for when battery protection is enabled (ie \
removed)
https://drive.google.com/file/d/1QNNL5fuSMhIF74WCbjhMlbAaCGyKIKRQ/view?usp=sharing
<url>
When battery protection is enabled, serial monitor will say this once,
even if i am running it off my 2s lipo battery and just have the usb cord
plugged into my computer
________________________________
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289272 Byte, Free: 263856 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 1: POWERON_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
Battery protection calibration data:
RESISTOR_TO_BATTTERY_PLUS: 10000 Ω
RESISTOR_TO_GND: 1000 Ω
DIODE_DROP: 0.00 V
________________________________
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Battery voltage: 1.58 V
Cutoff voltage per cell: 3.30 V
Fully charged voltage per cell: 4.20 V
Error, no valid battery detected! Only 2S & 3S batteries are supported!
REMOVE BATTERY, CONTROLLER IS LOCKED = 2 FAST FLASHES!
thanks for your comments so far.
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ4IJZXG5WHAHUDIQOLYYNOK7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBQGQZTCOJWGM
>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHOYQIBN7EDZR5NM55LYYPGTVAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRGY3DQOBRG4>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
That is correct
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 07:38:53
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Okay, should I be taking power from the battery to the esc as well as the
screw terminals on the circuit board?, is that what you mean by powering
through a y lead from the battery
On Sat, 16 Mar 2024, 5:59 pm FBester1976, ***@***.***> wrote:
Good morning,
If you have not fitted the battery protection resistors on the back of the
card, keep the // in place.
I also noticed that you have not powered the card through a y-lead from
your battery.
[cid:25BAFFE4-087B-4324-B895-A9AD3ACF2061]
[cid:79CB54DC-D45A-427A-A690-8C273FBEAAEE]
I also do not see a speaker connected for the sound.
Regards,
Frikkie
From: "RS33D" ***@***.******@***.***>>
Date: Friday, 15 March 2024 at 22:59:53
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Okay, thanks for your reply
Here is what the serial monitor says
________________________________
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 12: SW_CPU_RESET
Core 1 reset reason: 12: SW_CPU_RESET
________________________________
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 28
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
________________________________
Regarding the software i am using
Ardunio IDE is 1.8.15
Diyguy999 code version i am using is 9.12.0
No, i have not removed the \ from battery protection, so I am assuming it
is not activated
Please see the below video for when battery protection is enabled (ie \
removed)
https://drive.google.com/file/d/1QNNL5fuSMhIF74WCbjhMlbAaCGyKIKRQ/view?usp=sharing
<url>
When battery protection is enabled, serial monitor will say this once,
even if i am running it off my 2s lipo battery and just have the usb cord
plugged into my computer
________________________________
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289272 Byte, Free: 263856 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 1: POWERON_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
Battery protection calibration data:
RESISTOR_TO_BATTTERY_PLUS: 10000 Ω
RESISTOR_TO_GND: 1000 Ω
DIODE_DROP: 0.00 V
________________________________
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Battery voltage: 1.58 V
Cutoff voltage per cell: 3.30 V
Fully charged voltage per cell: 4.20 V
Error, no valid battery detected! Only 2S & 3S batteries are supported!
REMOVE BATTERY, CONTROLLER IS LOCKED = 2 FAST FLASHES!
thanks for your comments so far.
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ4IJZXG5WHAHUDIQOLYYNOK7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBQGQZTCOJWGM
>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHOYQIBN7EDZR5NM55LYYPGTVAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRGY3DQOBRG4>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ5GL5XJWZJRUKPJK5TYYPLFZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRG42TKNZYGY>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Okay, please see the Google drive video, have just used jumper leads to
take power to circuit board, have also plugged in a speaker, which makes a
noise like a cricket when turned on
https://drive.google.com/file/d/1ZwvYzqQYg46y0y7oNw9ggOLlnbyNeDA-/view?usp=drivesdk
Many thanks
Lawson
…On Sat, 16 Mar 2024, 7:53 pm FBester1976, ***@***.***> wrote:
That is correct
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 07:38:53
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Okay, should I be taking power from the battery to the esc as well as the
screw terminals on the circuit board?, is that what you mean by powering
through a y lead from the battery
On Sat, 16 Mar 2024, 5:59 pm FBester1976, ***@***.***> wrote:
> Good morning,
>
> If you have not fitted the battery protection resistors on the back of
the
> card, keep the // in place.
>
> I also noticed that you have not powered the card through a y-lead from
> your battery.
>
> [cid:25BAFFE4-087B-4324-B895-A9AD3ACF2061]
>
> [cid:79CB54DC-D45A-427A-A690-8C273FBEAAEE]
>
> I also do not see a speaker connected for the sound.
>
> Regards,
>
> Frikkie
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Friday, 15 March 2024 at 22:59:53
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> Okay, thanks for your reply
>
> Here is what the serial monitor says
>
> ________________________________
>
> TheDIYGuy999 RC engine sound & light controller for ESP32 software
version
> 9.12.0
> https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> Please read carefully:
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> Internal RAM size: 289660 Byte, Free: 264244 Byte
> WiFi MAC address: E4:65:B8:83:E7:48
> Core 0 reset reason: 12: SW_CPU_RESET
> Core 1 reset reason: 12: SW_CPU_RESET
>
> ________________________________
>
> EEPROM read.
> current eeprom_id: 2
> change it for default value upload!
>
> Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
> required!
>
> ENABLE_WIRELESS option enabled
>
> Informations for web configuration via your cell phone or computer
> *******************************
> SSID: My_Truck
> Password: 123456789
> IP address: 192.168.4.1
>
> WiFi Tx Power Level: 78
> WiFi Tx Power Level changed to: 28
>
> The following trailers are currently enabled:
> Trailer 1 MAC address: FE:49:01:00:00:01
> ________________________________
>
> Regarding the software i am using
>
> Ardunio IDE is 1.8.15
> Diyguy999 code version i am using is 9.12.0
>
> No, i have not removed the \ from battery protection, so I am assuming it
> is not activated
>
> Please see the below video for when battery protection is enabled (ie \
> removed)
>
>
>
https://drive.google.com/file/d/1QNNL5fuSMhIF74WCbjhMlbAaCGyKIKRQ/view?usp=sharing
> <url>
>
> When battery protection is enabled, serial monitor will say this once,
> even if i am running it off my 2s lipo battery and just have the usb cord
> plugged into my computer
>
> ________________________________
>
> TheDIYGuy999 RC engine sound & light controller for ESP32 software
version
> 9.12.0
> https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> Please read carefully:
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> Internal RAM size: 289272 Byte, Free: 263856 Byte
> WiFi MAC address: E4:65:B8:83:E7:48
> Core 0 reset reason: 1: POWERON_RESET
> Core 1 reset reason: 14: EXT_CPU_RESET
> Battery protection calibration data:
> RESISTOR_TO_BATTTERY_PLUS: 10000 Ω
> RESISTOR_TO_GND: 1000 Ω
> DIODE_DROP: 0.00 V
>
> ________________________________
>
> EEPROM read.
> current eeprom_id: 2
> change it for default value upload!
>
> Battery voltage: 1.58 V
> Cutoff voltage per cell: 3.30 V
> Fully charged voltage per cell: 4.20 V
> Error, no valid battery detected! Only 2S & 3S batteries are supported!
> REMOVE BATTERY, CONTROLLER IS LOCKED = 2 FAST FLASHES!
>
> thanks for your comments so far.
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)
>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ4IJZXG5WHAHUDIQOLYYNOK7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBQGQZTCOJWGM
> >.
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHOYQIBN7EDZR5NM55LYYPGTVAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRGY3DQOBRG4
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ5GL5XJWZJRUKPJK5TYYPLFZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRG42TKNZYGY
>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHNLVGETWQLVVDMRVG3YYPT7BAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA3TSNZWGE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
I think you still have the battery protection active
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 09:44:49
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Okay, please see the Google drive video, have just used jumper leads to
take power to circuit board, have also plugged in a speaker, which makes a
noise like a cricket when turned on
https://drive.google.com/file/d/1ZwvYzqQYg46y0y7oNw9ggOLlnbyNeDA-/view?usp=drivesdk
Many thanks
Lawson
On Sat, 16 Mar 2024, 7:53 pm FBester1976, ***@***.***> wrote:
That is correct
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 07:38:53
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Okay, should I be taking power from the battery to the esc as well as the
screw terminals on the circuit board?, is that what you mean by powering
through a y lead from the battery
On Sat, 16 Mar 2024, 5:59 pm FBester1976, ***@***.***> wrote:
> Good morning,
>
> If you have not fitted the battery protection resistors on the back of
the
> card, keep the // in place.
>
> I also noticed that you have not powered the card through a y-lead from
> your battery.
>
> [cid:25BAFFE4-087B-4324-B895-A9AD3ACF2061]
>
> [cid:79CB54DC-D45A-427A-A690-8C273FBEAAEE]
>
> I also do not see a speaker connected for the sound.
>
> Regards,
>
> Frikkie
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Friday, 15 March 2024 at 22:59:53
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> Okay, thanks for your reply
>
> Here is what the serial monitor says
>
> ________________________________
>
> TheDIYGuy999 RC engine sound & light controller for ESP32 software
version
> 9.12.0
> https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> Please read carefully:
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> Internal RAM size: 289660 Byte, Free: 264244 Byte
> WiFi MAC address: E4:65:B8:83:E7:48
> Core 0 reset reason: 12: SW_CPU_RESET
> Core 1 reset reason: 12: SW_CPU_RESET
>
> ________________________________
>
> EEPROM read.
> current eeprom_id: 2
> change it for default value upload!
>
> Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
> required!
>
> ENABLE_WIRELESS option enabled
>
> Informations for web configuration via your cell phone or computer
> *******************************
> SSID: My_Truck
> Password: 123456789
> IP address: 192.168.4.1
>
> WiFi Tx Power Level: 78
> WiFi Tx Power Level changed to: 28
>
> The following trailers are currently enabled:
> Trailer 1 MAC address: FE:49:01:00:00:01
> ________________________________
>
> Regarding the software i am using
>
> Ardunio IDE is 1.8.15
> Diyguy999 code version i am using is 9.12.0
>
> No, i have not removed the \ from battery protection, so I am assuming it
> is not activated
>
> Please see the below video for when battery protection is enabled (ie \
> removed)
>
>
>
https://drive.google.com/file/d/1QNNL5fuSMhIF74WCbjhMlbAaCGyKIKRQ/view?usp=sharing
> <url>
>
> When battery protection is enabled, serial monitor will say this once,
> even if i am running it off my 2s lipo battery and just have the usb cord
> plugged into my computer
>
> ________________________________
>
> TheDIYGuy999 RC engine sound & light controller for ESP32 software
version
> 9.12.0
> https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> Please read carefully:
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> Internal RAM size: 289272 Byte, Free: 263856 Byte
> WiFi MAC address: E4:65:B8:83:E7:48
> Core 0 reset reason: 1: POWERON_RESET
> Core 1 reset reason: 14: EXT_CPU_RESET
> Battery protection calibration data:
> RESISTOR_TO_BATTTERY_PLUS: 10000 Ω
> RESISTOR_TO_GND: 1000 Ω
> DIODE_DROP: 0.00 V
>
> ________________________________
>
> EEPROM read.
> current eeprom_id: 2
> change it for default value upload!
>
> Battery voltage: 1.58 V
> Cutoff voltage per cell: 3.30 V
> Fully charged voltage per cell: 4.20 V
> Error, no valid battery detected! Only 2S & 3S batteries are supported!
> REMOVE BATTERY, CONTROLLER IS LOCKED = 2 FAST FLASHES!
>
> thanks for your comments so far.
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)
>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ4IJZXG5WHAHUDIQOLYYNOK7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBQGQZTCOJWGM
> >.
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHOYQIBN7EDZR5NM55LYYPGTVAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRGY3DQOBRG4
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ5GL5XJWZJRUKPJK5TYYPLFZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRG42TKNZYGY
>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHNLVGETWQLVVDMRVG3YYPT7BAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA3TSNZWGE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQYERI5U3SOESHXTTRLYYPZ5PAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA4TKMJUHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Have turned off battery protection, but still no luck, see the below video
https://drive.google.com/file/d/1__MXfzIHpZRCOB1SxroqZxn1pJdPsphG/view?usp=drivesdk
Many thanks
…On Sat, 16 Mar 2024, 9:03 pm FBester1976, ***@***.***> wrote:
I think you still have the battery protection active
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 09:44:49
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Okay, please see the Google drive video, have just used jumper leads to
take power to circuit board, have also plugged in a speaker, which makes a
noise like a cricket when turned on
https://drive.google.com/file/d/1ZwvYzqQYg46y0y7oNw9ggOLlnbyNeDA-/view?usp=drivesdk
Many thanks
Lawson
On Sat, 16 Mar 2024, 7:53 pm FBester1976, ***@***.***> wrote:
> That is correct
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 07:38:53
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> Okay, should I be taking power from the battery to the esc as well as
the
> screw terminals on the circuit board?, is that what you mean by powering
> through a y lead from the battery
>
> On Sat, 16 Mar 2024, 5:59 pm FBester1976, ***@***.***> wrote:
>
> > Good morning,
> >
> > If you have not fitted the battery protection resistors on the back of
> the
> > card, keep the // in place.
> >
> > I also noticed that you have not powered the card through a y-lead
from
> > your battery.
> >
> > [cid:25BAFFE4-087B-4324-B895-A9AD3ACF2061]
> >
> > [cid:79CB54DC-D45A-427A-A690-8C273FBEAAEE]
> >
> > I also do not see a speaker connected for the sound.
> >
> > Regards,
> >
> > Frikkie
> >
> >
> > From: "RS33D" ***@***.******@***.***>>
> > Date: Friday, 15 March 2024 at 22:59:53
> > To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> > Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> > ***@***.******@***.***>>
> > Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> > Blinking !!Help Please!! (Issue #69)
> >
> >
> > Okay, thanks for your reply
> >
> > Here is what the serial monitor says
> >
> > ________________________________
> >
> > TheDIYGuy999 RC engine sound & light controller for ESP32 software
> version
> > 9.12.0
> > https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> > Please read carefully:
> >
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> > XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> > Internal RAM size: 289660 Byte, Free: 264244 Byte
> > WiFi MAC address: E4:65:B8:83:E7:48
> > Core 0 reset reason: 12: SW_CPU_RESET
> > Core 1 reset reason: 12: SW_CPU_RESET
> >
> > ________________________________
> >
> > EEPROM read.
> > current eeprom_id: 2
> > change it for default value upload!
> >
> > Warning, BATTERY_PROTECTION disabled! ESC with low discharge
protection
> > required!
> >
> > ENABLE_WIRELESS option enabled
> >
> > Informations for web configuration via your cell phone or computer
> > *******************************
> > SSID: My_Truck
> > Password: 123456789
> > IP address: 192.168.4.1
> >
> > WiFi Tx Power Level: 78
> > WiFi Tx Power Level changed to: 28
> >
> > The following trailers are currently enabled:
> > Trailer 1 MAC address: FE:49:01:00:00:01
> > ________________________________
> >
> > Regarding the software i am using
> >
> > Ardunio IDE is 1.8.15
> > Diyguy999 code version i am using is 9.12.0
> >
> > No, i have not removed the \ from battery protection, so I am assuming
it
> > is not activated
> >
> > Please see the below video for when battery protection is enabled (ie
\
> > removed)
> >
> >
> >
>
https://drive.google.com/file/d/1QNNL5fuSMhIF74WCbjhMlbAaCGyKIKRQ/view?usp=sharing
> > <url>
> >
> > When battery protection is enabled, serial monitor will say this once,
> > even if i am running it off my 2s lipo battery and just have the usb
cord
> > plugged into my computer
> >
> > ________________________________
> >
> > TheDIYGuy999 RC engine sound & light controller for ESP32 software
> version
> > 9.12.0
> > https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> > Please read carefully:
> >
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> > XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> > Internal RAM size: 289272 Byte, Free: 263856 Byte
> > WiFi MAC address: E4:65:B8:83:E7:48
> > Core 0 reset reason: 1: POWERON_RESET
> > Core 1 reset reason: 14: EXT_CPU_RESET
> > Battery protection calibration data:
> > RESISTOR_TO_BATTTERY_PLUS: 10000 Ω
> > RESISTOR_TO_GND: 1000 Ω
> > DIODE_DROP: 0.00 V
> >
> > ________________________________
> >
> > EEPROM read.
> > current eeprom_id: 2
> > change it for default value upload!
> >
> > Battery voltage: 1.58 V
> > Cutoff voltage per cell: 3.30 V
> > Fully charged voltage per cell: 4.20 V
> > Error, no valid battery detected! Only 2S & 3S batteries are
supported!
> > REMOVE BATTERY, CONTROLLER IS LOCKED = 2 FAST FLASHES!
> >
> > thanks for your comments so far.
> >
> > —
> > Reply to this email directly, view it on GitHub<
> >
>
#69 (comment)
> >,
> > or unsubscribe<
> >
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ4IJZXG5WHAHUDIQOLYYNOK7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBQGQZTCOJWGM
> > >.
> > You are receiving this because you commented.Message ID: ***@***.***>
> > Volkswagen Group Africa
> > Chairperson & Managing Director:
> >
> > M Biene*
> >
> > Directors:
> > R Coleman (Human Resources)
> > N Maliza (Corporate & Government Affairs)
> > T Milz* (Sales and Marketing)
> > F Ribeiro** (Finance)
> > U Schwabe* (Production)
> >
> > M Raphulu (Non-Executive)
> >
> > German*
> > Brazilian**
> >
> > Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE
compliant
> >
> > DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd
(Reg
> > No. 1946/023458/07), trading as Volkswagen Group Africa
> >
> > Any views expressed in this message are those of the individual
sender.
> > No liability shall attach whatsoever to Volkswagen of South Africa
from
> > this communication except where the sender is acting on specific
> authority
> > of Volkswagen of South Africa, such authority being public record and
> > acknowledged by Volkswagen of South Africa by nature of the employee's
> > functions. This document may in no way be photocopied, printed,
scanned
> or
> > electronically duplicated for any purposes other than that for which
it
> > was originally intended.
> > If you are not the intended recipient of this communication, please
> > discard this message and notify Volkswagen of South Africa immediately
at
> > ***@***.***
> > Volkswagen of South Africa's anonymous toll free ethics number is: 080
> 111
> > 3949
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#69 (comment)
> >,
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BG7NMHOYQIBN7EDZR5NM55LYYPGTVAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRGY3DQOBRG4
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5GL5XJWZJRUKPJK5TYYPLFZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRG42TKNZYGY
> >.
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHNLVGETWQLVVDMRVG3YYPT7BAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA3TSNZWGE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYERI5U3SOESHXTTRLYYPZ5PAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA4TKMJUHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHN2WP6AEA57EOZQQ2LYYP4D7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA4TSNZWGA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Serial monitor data please
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 21:09:30
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Have turned off battery protection, but still no luck, see the below video
https://drive.google.com/file/d/1__MXfzIHpZRCOB1SxroqZxn1pJdPsphG/view?usp=drivesdk
Many thanks
On Sat, 16 Mar 2024, 9:03 pm FBester1976, ***@***.***> wrote:
I think you still have the battery protection active
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 09:44:49
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Okay, please see the Google drive video, have just used jumper leads to
take power to circuit board, have also plugged in a speaker, which makes a
noise like a cricket when turned on
https://drive.google.com/file/d/1ZwvYzqQYg46y0y7oNw9ggOLlnbyNeDA-/view?usp=drivesdk
Many thanks
Lawson
On Sat, 16 Mar 2024, 7:53 pm FBester1976, ***@***.***> wrote:
> That is correct
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 07:38:53
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> Okay, should I be taking power from the battery to the esc as well as
the
> screw terminals on the circuit board?, is that what you mean by powering
> through a y lead from the battery
>
> On Sat, 16 Mar 2024, 5:59 pm FBester1976, ***@***.***> wrote:
>
> > Good morning,
> >
> > If you have not fitted the battery protection resistors on the back of
> the
> > card, keep the // in place.
> >
> > I also noticed that you have not powered the card through a y-lead
from
> > your battery.
> >
> > [cid:25BAFFE4-087B-4324-B895-A9AD3ACF2061]
> >
> > [cid:79CB54DC-D45A-427A-A690-8C273FBEAAEE]
> >
> > I also do not see a speaker connected for the sound.
> >
> > Regards,
> >
> > Frikkie
> >
> >
> > From: "RS33D" ***@***.******@***.***>>
> > Date: Friday, 15 March 2024 at 22:59:53
> > To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> > Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> > ***@***.******@***.***>>
> > Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> > Blinking !!Help Please!! (Issue #69)
> >
> >
> > Okay, thanks for your reply
> >
> > Here is what the serial monitor says
> >
> > ________________________________
> >
> > TheDIYGuy999 RC engine sound & light controller for ESP32 software
> version
> > 9.12.0
> > https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> > Please read carefully:
> >
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> > XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> > Internal RAM size: 289660 Byte, Free: 264244 Byte
> > WiFi MAC address: E4:65:B8:83:E7:48
> > Core 0 reset reason: 12: SW_CPU_RESET
> > Core 1 reset reason: 12: SW_CPU_RESET
> >
> > ________________________________
> >
> > EEPROM read.
> > current eeprom_id: 2
> > change it for default value upload!
> >
> > Warning, BATTERY_PROTECTION disabled! ESC with low discharge
protection
> > required!
> >
> > ENABLE_WIRELESS option enabled
> >
> > Informations for web configuration via your cell phone or computer
> > *******************************
> > SSID: My_Truck
> > Password: 123456789
> > IP address: 192.168.4.1
> >
> > WiFi Tx Power Level: 78
> > WiFi Tx Power Level changed to: 28
> >
> > The following trailers are currently enabled:
> > Trailer 1 MAC address: FE:49:01:00:00:01
> > ________________________________
> >
> > Regarding the software i am using
> >
> > Ardunio IDE is 1.8.15
> > Diyguy999 code version i am using is 9.12.0
> >
> > No, i have not removed the \ from battery protection, so I am assuming
it
> > is not activated
> >
> > Please see the below video for when battery protection is enabled (ie
\
> > removed)
> >
> >
> >
>
https://drive.google.com/file/d/1QNNL5fuSMhIF74WCbjhMlbAaCGyKIKRQ/view?usp=sharing
> > <url>
> >
> > When battery protection is enabled, serial monitor will say this once,
> > even if i am running it off my 2s lipo battery and just have the usb
cord
> > plugged into my computer
> >
> > ________________________________
> >
> > TheDIYGuy999 RC engine sound & light controller for ESP32 software
> version
> > 9.12.0
> > https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> > Please read carefully:
> >
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> > XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> > Internal RAM size: 289272 Byte, Free: 263856 Byte
> > WiFi MAC address: E4:65:B8:83:E7:48
> > Core 0 reset reason: 1: POWERON_RESET
> > Core 1 reset reason: 14: EXT_CPU_RESET
> > Battery protection calibration data:
> > RESISTOR_TO_BATTTERY_PLUS: 10000 Ω
> > RESISTOR_TO_GND: 1000 Ω
> > DIODE_DROP: 0.00 V
> >
> > ________________________________
> >
> > EEPROM read.
> > current eeprom_id: 2
> > change it for default value upload!
> >
> > Battery voltage: 1.58 V
> > Cutoff voltage per cell: 3.30 V
> > Fully charged voltage per cell: 4.20 V
> > Error, no valid battery detected! Only 2S & 3S batteries are
supported!
> > REMOVE BATTERY, CONTROLLER IS LOCKED = 2 FAST FLASHES!
> >
> > thanks for your comments so far.
> >
> > —
> > Reply to this email directly, view it on GitHub<
> >
>
#69 (comment)
> >,
> > or unsubscribe<
> >
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ4IJZXG5WHAHUDIQOLYYNOK7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBQGQZTCOJWGM
> > >.
> > You are receiving this because you commented.Message ID: ***@***.***>
> > Volkswagen Group Africa
> > Chairperson & Managing Director:
> >
> > M Biene*
> >
> > Directors:
> > R Coleman (Human Resources)
> > N Maliza (Corporate & Government Affairs)
> > T Milz* (Sales and Marketing)
> > F Ribeiro** (Finance)
> > U Schwabe* (Production)
> >
> > M Raphulu (Non-Executive)
> >
> > German*
> > Brazilian**
> >
> > Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE
compliant
> >
> > DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd
(Reg
> > No. 1946/023458/07), trading as Volkswagen Group Africa
> >
> > Any views expressed in this message are those of the individual
sender.
> > No liability shall attach whatsoever to Volkswagen of South Africa
from
> > this communication except where the sender is acting on specific
> authority
> > of Volkswagen of South Africa, such authority being public record and
> > acknowledged by Volkswagen of South Africa by nature of the employee's
> > functions. This document may in no way be photocopied, printed,
scanned
> or
> > electronically duplicated for any purposes other than that for which
it
> > was originally intended.
> > If you are not the intended recipient of this communication, please
> > discard this message and notify Volkswagen of South Africa immediately
at
> > ***@***.***
> > Volkswagen of South Africa's anonymous toll free ethics number is: 080
> 111
> > 3949
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#69 (comment)
> >,
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BG7NMHOYQIBN7EDZR5NM55LYYPGTVAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRGY3DQOBRG4
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5GL5XJWZJRUKPJK5TYYPLFZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRG42TKNZYGY
> >.
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHNLVGETWQLVVDMRVG3YYPT7BAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA3TSNZWGE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYERI5U3SOESHXTTRLYYPZ5PAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA4TKMJUHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHN2WP6AEA57EOZQQ2LYYP4D7AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBRHA4TSNZWGA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ4ZL7ZFNXTZYLIDTJTYYSKFTAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TENZWGE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Sure.
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version 9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully: https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection required!
…-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer *******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT : 0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
***@***.***>
|
|
Is the trim on your steering channel on zero?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 21:21:44
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Sure.
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version 9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully: https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection required!
…-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer *******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT : 0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
yes
From: FBester1976 ***@***.***>
Sent: Sunday, March 17, 2024 8:30 AM
To: TheDIYGuy999/Rc_Engine_Sound_ESP32 ***@***.***>
Cc: RS33D ***@***.***>; Author ***@***.***>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Is the trim on your steering channel on zero?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 21:21:44
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Sure.
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version 9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully: https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection required!
…-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer *******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT : 0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
—
Reply to this email directly, view it on GitHub <#69 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA> .
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
|
I have noted that when viewing the serial monitor with battery protection
off it sends the same information over and over again, however with battery
protection on, it only sends information once.
Is it meant to do this?
…On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
yes
*From:* FBester1976 ***@***.***>
*Sent:* Sunday, March 17, 2024 8:30 AM
*To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
***@***.***>
*Cc:* RS33D ***@***.***>; Author ***@***.***>
*Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Is the trim on your steering channel on zero?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 21:21:44
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Sure.
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
***@***.***>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
.
You are receiving this because you authored the thread.[image: Image
removed by sender.]Message ID:
***@***.***>
|
|
Yes, what is the info it is sending?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:08:15
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
I have noted that when viewing the serial monitor with battery protection
off it sends the same information over and over again, however with battery
protection on, it only sends information once.
Is it meant to do this?
On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
yes
*From:* FBester1976 ***@***.***>
*Sent:* Sunday, March 17, 2024 8:30 AM
*To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
***@***.***>
*Cc:* RS33D ***@***.***>; Author ***@***.***>
*Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Is the trim on your steering channel on zero?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 21:21:44
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Sure.
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
***@***.***>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
.
You are receiving this because you authored the thread.[image: Image
removed by sender.]Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQYP2XHM3O3KLXDUMNLYYSRCJAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEYTENRWG4>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Says this over and over again, should I try uploading the code through VS
studio
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
…-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
On Sun, 17 Mar 2024, 9:28 am FBester1976, ***@***.***> wrote:
Yes, what is the info it is sending?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:08:15
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
I have noted that when viewing the serial monitor with battery protection
off it sends the same information over and over again, however with
battery
protection on, it only sends information once.
Is it meant to do this?
On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
> yes
>
>
>
>
>
> *From:* FBester1976 ***@***.***>
> *Sent:* Sunday, March 17, 2024 8:30 AM
> *To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
> ***@***.***>
> *Cc:* RS33D ***@***.***>; Author ***@***.***>
> *Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
>
> Is the trim on your steering channel on zero?
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 21:21:44
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> Sure.
>
>
>
>
**************************************************************************************************
>
>
> TheDIYGuy999 RC engine sound & light controller for ESP32 software
version
> 9.12.0
>
> https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
>
> Please read carefully:
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
>
> XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
>
> Internal RAM size: 289660 Byte, Free: 264244 Byte
>
> WiFi MAC address: E4:65:B8:83:E7:48
>
> Core 0 reset reason: 8: TG1WDT_SYS_RESET
>
> Core 1 reset reason: 14: EXT_CPU_RESET
>
>
**************************************************************************************************
>
>
>
>
> EEPROM read.
>
> current eeprom_id: 2
>
> change it for default value upload!
>
>
>
> Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
> required!
>
> -------------------------------------
>
> ENABLE_WIRELESS option enabled
>
>
>
> Informations for web configuration via your cell phone or computer
> *******************************
>
> SSID: My_Truck
>
> Password: 123456789
>
> IP address: 192.168.4.1
>
>
>
> WiFi Tx Power Level: 78
>
> WiFi Tx Power Level changed to: 26
>
>
>
> The following trailers are currently enabled:
>
> Trailer 1 MAC address: FE:49:01:00:00:01
>
> -------------------------------------
>
> Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
>
>
>
> Core 1 register dump:
>
> PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
>
> A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
>
> A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
>
> A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
>
> A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
>
> EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
> 0xffffffff
>
> Core 1 was running in ISR context:
>
> EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
>
>
>
>
>
> Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
>
>
>
>
>
>
>
>
>
> ELF file SHA256: 360c5eb004a87de0
>
>
>
> Rebooting...
>
>
>
>
**************************************************************************************************
>
>
>
>
>
>
> ***@***.***>
>
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
>
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
> .
> You are receiving this because you authored the thread.[image: Image
> removed by sender.]Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYP2XHM3O3KLXDUMNLYYSRCJAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEYTENRWG4>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHMFYLWL3GWB44QSF53YYSTNDAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAMJWHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Never seen those errors before, try VSCode
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:30:51
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Says this over and over again, should I try uploading the code through VS
studio
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
On Sun, 17 Mar 2024, 9:28 am FBester1976, ***@***.***> wrote:
Yes, what is the info it is sending?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:08:15
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
I have noted that when viewing the serial monitor with battery protection
off it sends the same information over and over again, however with
battery
protection on, it only sends information once.
Is it meant to do this?
On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
> yes
>
>
>
>
>
> *From:* FBester1976 ***@***.***>
> *Sent:* Sunday, March 17, 2024 8:30 AM
> *To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
> ***@***.***>
> *Cc:* RS33D ***@***.***>; Author ***@***.***>
> *Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
>
> Is the trim on your steering channel on zero?
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 21:21:44
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> Sure.
>
>
>
>
**************************************************************************************************
>
>
> TheDIYGuy999 RC engine sound & light controller for ESP32 software
version
> 9.12.0
>
> https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
>
> Please read carefully:
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
>
> XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
>
> Internal RAM size: 289660 Byte, Free: 264244 Byte
>
> WiFi MAC address: E4:65:B8:83:E7:48
>
> Core 0 reset reason: 8: TG1WDT_SYS_RESET
>
> Core 1 reset reason: 14: EXT_CPU_RESET
>
>
**************************************************************************************************
>
>
>
>
> EEPROM read.
>
> current eeprom_id: 2
>
> change it for default value upload!
>
>
>
> Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
> required!
>
> -------------------------------------
>
> ENABLE_WIRELESS option enabled
>
>
>
> Informations for web configuration via your cell phone or computer
> *******************************
>
> SSID: My_Truck
>
> Password: 123456789
>
> IP address: 192.168.4.1
>
>
>
> WiFi Tx Power Level: 78
>
> WiFi Tx Power Level changed to: 26
>
>
>
> The following trailers are currently enabled:
>
> Trailer 1 MAC address: FE:49:01:00:00:01
>
> -------------------------------------
>
> Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
>
>
>
> Core 1 register dump:
>
> PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
>
> A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
>
> A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
>
> A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
>
> A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
>
> EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
> 0xffffffff
>
> Core 1 was running in ISR context:
>
> EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
>
>
>
>
>
> Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
>
>
>
>
>
>
>
>
>
> ELF file SHA256: 360c5eb004a87de0
>
>
>
> Rebooting...
>
>
>
>
**************************************************************************************************
>
>
>
>
>
>
> ***@***.***>
>
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
>
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
> .
> You are receiving this because you authored the thread.[image: Image
> removed by sender.]Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYP2XHM3O3KLXDUMNLYYSRCJAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEYTENRWG4>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHMFYLWL3GWB44QSF53YYSTNDAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAMJWHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ3SRKMLAGMWEZM6GEDYYSTWZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAOJSHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Hello
Have tried VScode and have mangaed to get it to work (sounds etc), but after fiddling around with the sounds, changing it from the orginal to the caterpillar truck sound it doesn’t work, I also played with channel assignments
So I uploaded the orginal code (as per the one that works) and it still doesn’t work
Please see the below google drive video for what happens when I power it on
https://drive.google.com/file/d/1pOtpVrpAXErzeCzaloz0xr0UTYyJBJzV/view?usp=sharing
when plugged in to the serial monitor (esc and Y cable still on) it gives me this (but early in my testing I rember seeing something about Ch1 being an issue but I cant seem to make that come up again, might have been about an offset, not to sure though)
--- Terminal on COM3 | 115200 8-N-1
--- Available filters and text transformations: colorize, debug, default, direct, esp32_exception_decoder, hexlify, log2file, nocontrol, printable, send_on_enter, time
--- More details at <https://bit.ly/pio-monitor-filters> https://bit.ly/pio-monitor-filters
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:0x0
(DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0
(DOWNL0x6 (SDIO_RESET),bootSDIO_FEI_FEO_V2))
waiting for download
From: FBester1976 ***@***.***>
Sent: Sunday, March 17, 2024 6:57 PM
To: TheDIYGuy999/Rc_Engine_Sound_ESP32 ***@***.***>
Cc: RS33D ***@***.***>; Author ***@***.***>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Never seen those errors before, try VSCode
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:30:51
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Says this over and over again, should I try uploading the code through VS
studio
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
On Sun, 17 Mar 2024, 9:28 am FBester1976, ***@***.***> wrote:
Yes, what is the info it is sending?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:08:15
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
I have noted that when viewing the serial monitor with battery protection
off it sends the same information over and over again, however with
battery
protection on, it only sends information once.
Is it meant to do this?
On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
> yes
>
>
>
>
>
> *From:* FBester1976 ***@***.***>
> *Sent:* Sunday, March 17, 2024 8:30 AM
> *To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
> ***@***.***>
> *Cc:* RS33D ***@***.***>; Author ***@***.***>
> *Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
>
> Is the trim on your steering channel on zero?
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 21:21:44
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> Sure.
>
>
>
>
**************************************************************************************************
>
>
> TheDIYGuy999 RC engine sound & light controller for ESP32 software
version
> 9.12.0
>
> https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
>
> Please read carefully:
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
>
> XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
>
> Internal RAM size: 289660 Byte, Free: 264244 Byte
>
> WiFi MAC address: E4:65:B8:83:E7:48
>
> Core 0 reset reason: 8: TG1WDT_SYS_RESET
>
> Core 1 reset reason: 14: EXT_CPU_RESET
>
>
**************************************************************************************************
>
>
>
>
> EEPROM read.
>
> current eeprom_id: 2
>
> change it for default value upload!
>
>
>
> Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
> required!
>
> -------------------------------------
>
> ENABLE_WIRELESS option enabled
>
>
>
> Informations for web configuration via your cell phone or computer
> *******************************
>
> SSID: My_Truck
>
> Password: 123456789
>
> IP address: 192.168.4.1
>
>
>
> WiFi Tx Power Level: 78
>
> WiFi Tx Power Level changed to: 26
>
>
>
> The following trailers are currently enabled:
>
> Trailer 1 MAC address: FE:49:01:00:00:01
>
> -------------------------------------
>
> Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
>
>
>
> Core 1 register dump:
>
> PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
>
> A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
>
> A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
>
> A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
>
> A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
>
> EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
> 0xffffffff
>
> Core 1 was running in ISR context:
>
> EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
>
>
>
>
>
> Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
>
>
>
>
>
>
>
>
>
> ELF file SHA256: 360c5eb004a87de0
>
>
>
> Rebooting...
>
>
>
>
**************************************************************************************************
>
>
>
>
>
>
> ***@***.***>
>
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
>
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
> .
> You are receiving this because you authored the thread.[image: Image
> removed by sender.]Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYP2XHM3O3KLXDUMNLYYSRCJAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEYTENRWG4>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHMFYLWL3GWB44QSF53YYSTNDAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAMJWHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ3SRKMLAGMWEZM6GEDYYSTWZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAOJSHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
—
Reply to this email directly, view it on GitHub <#69 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BG7NMHOGRBBIYYHWHD3H2Y3YYUWBTAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGMZDCOJXGY> .
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
|
Hi, not sure what all you changed. Have not seeb those errors before.
From: "RS33D" ***@***.******@***.***>>
Date: Thursday, 21 March 2024 at 09:37:02
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Hello
Have tried VScode and have mangaed to get it to work (sounds etc), but after fiddling around with the sounds, changing it from the orginal to the caterpillar truck sound it doesn’t work, I also played with channel assignments
So I uploaded the orginal code (as per the one that works) and it still doesn’t work
Please see the below google drive video for what happens when I power it on
https://drive.google.com/file/d/1pOtpVrpAXErzeCzaloz0xr0UTYyJBJzV/view?usp=sharing
when plugged in to the serial monitor (esc and Y cable still on) it gives me this (but early in my testing I rember seeing something about Ch1 being an issue but I cant seem to make that come up again, might have been about an offset, not to sure though)
--- Terminal on COM3 | 115200 8-N-1
--- Available filters and text transformations: colorize, debug, default, direct, esp32_exception_decoder, hexlify, log2file, nocontrol, printable, send_on_enter, time
--- More details at <https://bit.ly/pio-monitor-filters> https://bit.ly/pio-monitor-filters
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:0x0
(DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0
(DOWNL0x6 (SDIO_RESET),bootSDIO_FEI_FEO_V2))
waiting for download
From: FBester1976 ***@***.***>
Sent: Sunday, March 17, 2024 6:57 PM
To: TheDIYGuy999/Rc_Engine_Sound_ESP32 ***@***.***>
Cc: RS33D ***@***.***>; Author ***@***.***>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Never seen those errors before, try VSCode
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:30:51
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Says this over and over again, should I try uploading the code through VS
studio
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
On Sun, 17 Mar 2024, 9:28 am FBester1976, ***@***.***> wrote:
Yes, what is the info it is sending?
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:08:15
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
I have noted that when viewing the serial monitor with battery protection
off it sends the same information over and over again, however with
battery
protection on, it only sends information once.
Is it meant to do this?
On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
> yes
>
>
>
>
>
> *From:* FBester1976 ***@***.***>
> *Sent:* Sunday, March 17, 2024 8:30 AM
> *To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
> ***@***.***>
> *Cc:* RS33D ***@***.***>; Author ***@***.***>
> *Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
>
> Is the trim on your steering channel on zero?
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 21:21:44
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> Sure.
>
>
>
>
**************************************************************************************************
>
>
> TheDIYGuy999 RC engine sound & light controller for ESP32 software
version
> 9.12.0
>
> https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
>
> Please read carefully:
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
>
> XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
>
> Internal RAM size: 289660 Byte, Free: 264244 Byte
>
> WiFi MAC address: E4:65:B8:83:E7:48
>
> Core 0 reset reason: 8: TG1WDT_SYS_RESET
>
> Core 1 reset reason: 14: EXT_CPU_RESET
>
>
**************************************************************************************************
>
>
>
>
> EEPROM read.
>
> current eeprom_id: 2
>
> change it for default value upload!
>
>
>
> Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
> required!
>
> -------------------------------------
>
> ENABLE_WIRELESS option enabled
>
>
>
> Informations for web configuration via your cell phone or computer
> *******************************
>
> SSID: My_Truck
>
> Password: 123456789
>
> IP address: 192.168.4.1
>
>
>
> WiFi Tx Power Level: 78
>
> WiFi Tx Power Level changed to: 26
>
>
>
> The following trailers are currently enabled:
>
> Trailer 1 MAC address: FE:49:01:00:00:01
>
> -------------------------------------
>
> Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
>
>
>
> Core 1 register dump:
>
> PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
>
> A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
>
> A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
>
> A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
>
> A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
>
> EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
> 0xffffffff
>
> Core 1 was running in ISR context:
>
> EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
>
>
>
>
>
> Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
>
>
>
>
>
>
>
>
>
> ELF file SHA256: 360c5eb004a87de0
>
>
>
> Rebooting...
>
>
>
>
**************************************************************************************************
>
>
>
>
>
>
> ***@***.***>
>
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
>
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
> .
> You are receiving this because you authored the thread.[image: Image
> removed by sender.]Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYP2XHM3O3KLXDUMNLYYSRCJAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEYTENRWG4>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHMFYLWL3GWB44QSF53YYSTNDAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAMJWHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ3SRKMLAGMWEZM6GEDYYSTWZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAOJSHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
—
Reply to this email directly, view it on GitHub <#69 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BG7NMHOGRBBIYYHWHD3H2Y3YYUWBTAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGMZDCOJXGY> .
You are receiving this because you authored the thread.Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQYSYE7HCGGW7QR5SJDYZKEYNAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJRGM4DINBSGQ>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Hello, have managed to get it to work reliably now, just need to sort out
my channel assignments, unsure of how to turn headlights on and off, adjust
high or low beam and turn on side lights
…On Fri, 22 Mar 2024, 8:58 pm FBester1976, ***@***.***> wrote:
Hi, not sure what all you changed. Have not seeb those errors before.
From: "RS33D" ***@***.******@***.***>>
Date: Thursday, 21 March 2024 at 09:37:02
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Hello
Have tried VScode and have mangaed to get it to work (sounds etc), but
after fiddling around with the sounds, changing it from the orginal to the
caterpillar truck sound it doesn’t work, I also played with channel
assignments
So I uploaded the orginal code (as per the one that works) and it still
doesn’t work
Please see the below google drive video for what happens when I power it
on
https://drive.google.com/file/d/1pOtpVrpAXErzeCzaloz0xr0UTYyJBJzV/view?usp=sharing
when plugged in to the serial monitor (esc and Y cable still on) it gives
me this (but early in my testing I rember seeing something about Ch1 being
an issue but I cant seem to make that come up again, might have been about
an offset, not to sure though)
--- Terminal on COM3 | 115200 8-N-1
--- Available filters and text transformations: colorize, debug, default,
direct, esp32_exception_decoder, hexlify, log2file, nocontrol, printable,
send_on_enter, time
--- More details at <https://bit.ly/pio-monitor-filters>
https://bit.ly/pio-monitor-filters
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:0x0
(DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0
(DOWNL0x6 (SDIO_RESET),bootSDIO_FEI_FEO_V2))
waiting for download
From: FBester1976 ***@***.***>
Sent: Sunday, March 17, 2024 6:57 PM
To: TheDIYGuy999/Rc_Engine_Sound_ESP32 ***@***.***>
Cc: RS33D ***@***.***>; Author ***@***.***>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Never seen those errors before, try VSCode
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:30:51
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Says this over and over again, should I try uploading the code through VS
studio
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
On Sun, 17 Mar 2024, 9:28 am FBester1976, ***@***.***> wrote:
> Yes, what is the info it is sending?
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 22:08:15
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> I have noted that when viewing the serial monitor with battery
protection
> off it sends the same information over and over again, however with
> battery
> protection on, it only sends information once.
>
> Is it meant to do this?
>
> On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
>
> > yes
> >
> >
> >
> >
> >
> > *From:* FBester1976 ***@***.***>
> > *Sent:* Sunday, March 17, 2024 8:30 AM
> > *To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
> > ***@***.***>
> > *Cc:* RS33D ***@***.***>; Author ***@***.***>
> > *Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> > Blinking !!Help Please!! (Issue #69)
> >
> >
> >
> > Is the trim on your steering channel on zero?
> >
> >
> > From: "RS33D" ***@***.******@***.***>>
> > Date: Saturday, 16 March 2024 at 21:21:44
> > To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> > Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> > ***@***.******@***.***>>
> > Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> > Blinking !!Help Please!! (Issue #69)
> >
> >
> > Sure.
> >
> >
> >
> >
>
**************************************************************************************************
>
> >
> >
> > TheDIYGuy999 RC engine sound & light controller for ESP32 software
> version
> > 9.12.0
> >
> > https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> >
> > Please read carefully:
> >
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> >
> > XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> >
> > Internal RAM size: 289660 Byte, Free: 264244 Byte
> >
> > WiFi MAC address: E4:65:B8:83:E7:48
> >
> > Core 0 reset reason: 8: TG1WDT_SYS_RESET
> >
> > Core 1 reset reason: 14: EXT_CPU_RESET
> >
> >
>
**************************************************************************************************
>
> >
> >
> >
> >
> > EEPROM read.
> >
> > current eeprom_id: 2
> >
> > change it for default value upload!
> >
> >
> >
> > Warning, BATTERY_PROTECTION disabled! ESC with low discharge
protection
> > required!
> >
> > -------------------------------------
> >
> > ENABLE_WIRELESS option enabled
> >
> >
> >
> > Informations for web configuration via your cell phone or computer
> > *******************************
> >
> > SSID: My_Truck
> >
> > Password: 123456789
> >
> > IP address: 192.168.4.1
> >
> >
> >
> > WiFi Tx Power Level: 78
> >
> > WiFi Tx Power Level changed to: 26
> >
> >
> >
> > The following trailers are currently enabled:
> >
> > Trailer 1 MAC address: FE:49:01:00:00:01
> >
> > -------------------------------------
> >
> > Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on
CPU1).
> >
> >
> >
> > Core 1 register dump:
> >
> > PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
> >
> > A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
> >
> > A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
> >
> > A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
> >
> > A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE:
0x00000006
> >
> > EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
> > 0xffffffff
> >
> > Core 1 was running in ISR context:
> >
> > EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 :
0x00000000
> >
> >
> >
> >
> >
> > Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ELF file SHA256: 360c5eb004a87de0
> >
> >
> >
> > Rebooting...
> >
> >
> >
> >
>
**************************************************************************************************
>
> >
> >
> >
> >
> >
> >
> > ***@***.***>
> >
> >
> > —
> > Reply to this email directly, view it on GitHub<
> >
>
#69 (comment)>,
>
> > or unsubscribe<
> >
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
>
> >
> > You are receiving this because you commented.Message ID: ***@***.***>
> > Volkswagen Group Africa
> > Chairperson & Managing Director:
> >
> > M Biene*
> >
> > Directors:
> > R Coleman (Human Resources)
> > N Maliza (Corporate & Government Affairs)
> > T Milz* (Sales and Marketing)
> > F Ribeiro** (Finance)
> > U Schwabe* (Production)
> >
> > M Raphulu (Non-Executive)
> >
> > German*
> > Brazilian**
> >
> > Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE
compliant
> >
> > DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd
(Reg
> > No. 1946/023458/07), trading as Volkswagen Group Africa
> >
> > Any views expressed in this message are those of the individual
sender.
> > No liability shall attach whatsoever to Volkswagen of South Africa
from
> > this communication except where the sender is acting on specific
> authority
> > of Volkswagen of South Africa, such authority being public record and
> > acknowledged by Volkswagen of South Africa by nature of the employee's
> > functions. This document may in no way be photocopied, printed,
scanned
> or
> > electronically duplicated for any purposes other than that for which
it
> > was originally intended.
> > If you are not the intended recipient of this communication, please
> > discard this message and notify Volkswagen of South Africa immediately
> at
> > ***@***.***
> > Volkswagen of South Africa's anonymous toll free ethics number is: 080
> 111
> > 3949
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#69 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
>
> > .
> > You are receiving this because you authored the thread.[image: Image
> > removed by sender.]Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQYP2XHM3O3KLXDUMNLYYSRCJAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEYTENRWG4>.
>
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHMFYLWL3GWB44QSF53YYSTNDAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAMJWHE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ3SRKMLAGMWEZM6GEDYYSTWZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAOJSHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub <
#69 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/BG7NMHOGRBBIYYHWHD3H2Y3YYUWBTAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGMZDCOJXGY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYSYE7HCGGW7QR5SJDYZKEYNAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJRGM4DINBSGQ>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHLYRSOVS27PUL4CVI3YZPQCLAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJUGUZTMNZUGU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
https://youtube.com/playlist?list=PLhpVbuijh28IvC5ml1K5NiqUKX2A34Fp1&si=OuBoI1wKSks4r1Aq
https://youtu.be/TLT7ZF_BZVU?si=bYFdPg2GUVyOH7T2
From: "RS33D" ***@***.******@***.***>>
Date: Friday, 22 March 2024 at 10:16:19
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Hello, have managed to get it to work reliably now, just need to sort out
my channel assignments, unsure of how to turn headlights on and off, adjust
high or low beam and turn on side lights
On Fri, 22 Mar 2024, 8:58 pm FBester1976, ***@***.***> wrote:
Hi, not sure what all you changed. Have not seeb those errors before.
From: "RS33D" ***@***.******@***.***>>
Date: Thursday, 21 March 2024 at 09:37:02
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Hello
Have tried VScode and have mangaed to get it to work (sounds etc), but
after fiddling around with the sounds, changing it from the orginal to the
caterpillar truck sound it doesn’t work, I also played with channel
assignments
So I uploaded the orginal code (as per the one that works) and it still
doesn’t work
Please see the below google drive video for what happens when I power it
on
https://drive.google.com/file/d/1pOtpVrpAXErzeCzaloz0xr0UTYyJBJzV/view?usp=sharing
when plugged in to the serial monitor (esc and Y cable still on) it gives
me this (but early in my testing I rember seeing something about Ch1 being
an issue but I cant seem to make that come up again, might have been about
an offset, not to sure though)
--- Terminal on COM3 | 115200 8-N-1
--- Available filters and text transformations: colorize, debug, default,
direct, esp32_exception_decoder, hexlify, log2file, nocontrol, printable,
send_on_enter, time
--- More details at <https://bit.ly/pio-monitor-filters>
https://bit.ly/pio-monitor-filters
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:0x0
(DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0
(DOWNL0x6 (SDIO_RESET),bootSDIO_FEI_FEO_V2))
waiting for download
From: FBester1976 ***@***.***>
Sent: Sunday, March 17, 2024 6:57 PM
To: TheDIYGuy999/Rc_Engine_Sound_ESP32 ***@***.***>
Cc: RS33D ***@***.***>; Author ***@***.***>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Never seen those errors before, try VSCode
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:30:51
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Says this over and over again, should I try uploading the code through VS
studio
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
On Sun, 17 Mar 2024, 9:28 am FBester1976, ***@***.***> wrote:
> Yes, what is the info it is sending?
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 22:08:15
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> I have noted that when viewing the serial monitor with battery
protection
> off it sends the same information over and over again, however with
> battery
> protection on, it only sends information once.
>
> Is it meant to do this?
>
> On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
>
> > yes
> >
> >
> >
> >
> >
> > *From:* FBester1976 ***@***.***>
> > *Sent:* Sunday, March 17, 2024 8:30 AM
> > *To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
> > ***@***.***>
> > *Cc:* RS33D ***@***.***>; Author ***@***.***>
> > *Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> > Blinking !!Help Please!! (Issue #69)
> >
> >
> >
> > Is the trim on your steering channel on zero?
> >
> >
> > From: "RS33D" ***@***.******@***.***>>
> > Date: Saturday, 16 March 2024 at 21:21:44
> > To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> > Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> > ***@***.******@***.***>>
> > Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> > Blinking !!Help Please!! (Issue #69)
> >
> >
> > Sure.
> >
> >
> >
> >
>
**************************************************************************************************
>
> >
> >
> > TheDIYGuy999 RC engine sound & light controller for ESP32 software
> version
> > 9.12.0
> >
> > https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> >
> > Please read carefully:
> >
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> >
> > XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> >
> > Internal RAM size: 289660 Byte, Free: 264244 Byte
> >
> > WiFi MAC address: E4:65:B8:83:E7:48
> >
> > Core 0 reset reason: 8: TG1WDT_SYS_RESET
> >
> > Core 1 reset reason: 14: EXT_CPU_RESET
> >
> >
>
**************************************************************************************************
>
> >
> >
> >
> >
> > EEPROM read.
> >
> > current eeprom_id: 2
> >
> > change it for default value upload!
> >
> >
> >
> > Warning, BATTERY_PROTECTION disabled! ESC with low discharge
protection
> > required!
> >
> > -------------------------------------
> >
> > ENABLE_WIRELESS option enabled
> >
> >
> >
> > Informations for web configuration via your cell phone or computer
> > *******************************
> >
> > SSID: My_Truck
> >
> > Password: 123456789
> >
> > IP address: 192.168.4.1
> >
> >
> >
> > WiFi Tx Power Level: 78
> >
> > WiFi Tx Power Level changed to: 26
> >
> >
> >
> > The following trailers are currently enabled:
> >
> > Trailer 1 MAC address: FE:49:01:00:00:01
> >
> > -------------------------------------
> >
> > Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on
CPU1).
> >
> >
> >
> > Core 1 register dump:
> >
> > PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
> >
> > A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
> >
> > A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
> >
> > A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
> >
> > A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE:
0x00000006
> >
> > EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
> > 0xffffffff
> >
> > Core 1 was running in ISR context:
> >
> > EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 :
0x00000000
> >
> >
> >
> >
> >
> > Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ELF file SHA256: 360c5eb004a87de0
> >
> >
> >
> > Rebooting...
> >
> >
> >
> >
>
**************************************************************************************************
>
> >
> >
> >
> >
> >
> >
> > ***@***.***>
> >
> >
> > —
> > Reply to this email directly, view it on GitHub<
> >
>
#69 (comment)>,
>
> > or unsubscribe<
> >
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
>
> >
> > You are receiving this because you commented.Message ID: ***@***.***>
> > Volkswagen Group Africa
> > Chairperson & Managing Director:
> >
> > M Biene*
> >
> > Directors:
> > R Coleman (Human Resources)
> > N Maliza (Corporate & Government Affairs)
> > T Milz* (Sales and Marketing)
> > F Ribeiro** (Finance)
> > U Schwabe* (Production)
> >
> > M Raphulu (Non-Executive)
> >
> > German*
> > Brazilian**
> >
> > Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE
compliant
> >
> > DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd
(Reg
> > No. 1946/023458/07), trading as Volkswagen Group Africa
> >
> > Any views expressed in this message are those of the individual
sender.
> > No liability shall attach whatsoever to Volkswagen of South Africa
from
> > this communication except where the sender is acting on specific
> authority
> > of Volkswagen of South Africa, such authority being public record and
> > acknowledged by Volkswagen of South Africa by nature of the employee's
> > functions. This document may in no way be photocopied, printed,
scanned
> or
> > electronically duplicated for any purposes other than that for which
it
> > was originally intended.
> > If you are not the intended recipient of this communication, please
> > discard this message and notify Volkswagen of South Africa immediately
> at
> > ***@***.***
> > Volkswagen of South Africa's anonymous toll free ethics number is: 080
> 111
> > 3949
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#69 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
>
> > .
> > You are receiving this because you authored the thread.[image: Image
> > removed by sender.]Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQYP2XHM3O3KLXDUMNLYYSRCJAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEYTENRWG4>.
>
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHMFYLWL3GWB44QSF53YYSTNDAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAMJWHE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ3SRKMLAGMWEZM6GEDYYSTWZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAOJSHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub <
#69 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/BG7NMHOGRBBIYYHWHD3H2Y3YYUWBTAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGMZDCOJXGY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYSYE7HCGGW7QR5SJDYZKEYNAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJRGM4DINBSGQ>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHLYRSOVS27PUL4CVI3YZPQCLAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJUGUZTMNZUGU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ3OXHY7SUAPJA6XARTYZPSD5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJUGU3TENZVGU>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
|
|
Awesome, thanks for that, have managed to get it all working
Thanks so much for your help, much appreciated
From: FBester1976 ***@***.***>
Sent: Saturday, March 23, 2024 12:26 AM
To: TheDIYGuy999/Rc_Engine_Sound_ESP32 ***@***.***>
Cc: RS33D ***@***.***>; Author ***@***.***>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
https://youtube.com/playlist?list=PLhpVbuijh28IvC5ml1K5NiqUKX2A34Fp1&si=OuBoI1wKSks4r1Aq
https://youtu.be/TLT7ZF_BZVU?si=bYFdPg2GUVyOH7T2
From: "RS33D" ***@***.******@***.***>>
Date: Friday, 22 March 2024 at 10:16:19
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment" ***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light Blinking !!Help Please!! (Issue #69)
Hello, have managed to get it to work reliably now, just need to sort out
my channel assignments, unsure of how to turn headlights on and off, adjust
high or low beam and turn on side lights
On Fri, 22 Mar 2024, 8:58 pm FBester1976, ***@***.***> wrote:
Hi, not sure what all you changed. Have not seeb those errors before.
From: "RS33D" ***@***.******@***.***>>
Date: Thursday, 21 March 2024 at 09:37:02
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Hello
Have tried VScode and have mangaed to get it to work (sounds etc), but
after fiddling around with the sounds, changing it from the orginal to the
caterpillar truck sound it doesn’t work, I also played with channel
assignments
So I uploaded the orginal code (as per the one that works) and it still
doesn’t work
Please see the below google drive video for what happens when I power it
on
https://drive.google.com/file/d/1pOtpVrpAXErzeCzaloz0xr0UTYyJBJzV/view?usp=sharing
when plugged in to the serial monitor (esc and Y cable still on) it gives
me this (but early in my testing I rember seeing something about Ch1 being
an issue but I cant seem to make that come up again, might have been about
an offset, not to sure though)
--- Terminal on COM3 | 115200 8-N-1
--- Available filters and text transformations: colorize, debug, default,
direct, esp32_exception_decoder, hexlify, log2file, nocontrol, printable,
send_on_enter, time
--- More details at <https://bit.ly/pio-monitor-filters>
https://bit.ly/pio-monitor-filters
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
, check transmitter & receiver!
ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:46
rst:ets Jul 29 2019 12:21:0x0
(DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0 (DOWNL0x6
(SDIO_RESET),boot:0x0 (DOWNL0x6 (SDIO_RESET),boot:0x0
(DOWNL0x6 (SDIO_RESET),bootSDIO_FEI_FEO_V2))
waiting for download
From: FBester1976 ***@***.***>
Sent: Sunday, March 17, 2024 6:57 PM
To: TheDIYGuy999/Rc_Engine_Sound_ESP32 ***@***.***>
Cc: RS33D ***@***.***>; Author ***@***.***>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Never seen those errors before, try VSCode
From: "RS33D" ***@***.******@***.***>>
Date: Saturday, 16 March 2024 at 22:30:51
To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
***@***.******@***.***>>
Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
Blinking !!Help Please!! (Issue #69)
Says this over and over again, should I try uploading the code through VS
studio
**************************************************************************************************
TheDIYGuy999 RC engine sound & light controller for ESP32 software version
9.12.0
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Please read carefully:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
Internal RAM size: 289660 Byte, Free: 264244 Byte
WiFi MAC address: E4:65:B8:83:E7:48
Core 0 reset reason: 8: TG1WDT_SYS_RESET
Core 1 reset reason: 14: EXT_CPU_RESET
**************************************************************************************************
EEPROM read.
current eeprom_id: 2
change it for default value upload!
Warning, BATTERY_PROTECTION disabled! ESC with low discharge protection
required!
-------------------------------------
ENABLE_WIRELESS option enabled
Informations for web configuration via your cell phone or computer
*******************************
SSID: My_Truck
Password: 123456789
IP address: 192.168.4.1
WiFi Tx Power Level: 78
WiFi Tx Power Level changed to: 26
The following trailers are currently enabled:
Trailer 1 MAC address: FE:49:01:00:00:01
-------------------------------------
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
ELF file SHA256: 360c5eb004a87de0
Rebooting...
**************************************************************************************************
On Sun, 17 Mar 2024, 9:28 am FBester1976, ***@***.***> wrote:
> Yes, what is the info it is sending?
>
>
> From: "RS33D" ***@***.******@***.***>>
> Date: Saturday, 16 March 2024 at 22:08:15
> To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> ***@***.******@***.***>>
> Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> Blinking !!Help Please!! (Issue #69)
>
>
> I have noted that when viewing the serial monitor with battery
protection
> off it sends the same information over and over again, however with
> battery
> protection on, it only sends information once.
>
> Is it meant to do this?
>
> On Sun, 17 Mar 2024, 8:30 am , ***@***.***> wrote:
>
> > yes
> >
> >
> >
> >
> >
> > *From:* FBester1976 ***@***.***>
> > *Sent:* Sunday, March 17, 2024 8:30 AM
> > *To:* TheDIYGuy999/Rc_Engine_Sound_ESP32 <
> > ***@***.***>
> > *Cc:* RS33D ***@***.***>; Author ***@***.***>
> > *Subject:* Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> > Blinking !!Help Please!! (Issue #69)
> >
> >
> >
> > Is the trim on your steering channel on zero?
> >
> >
> > From: "RS33D" ***@***.******@***.***>>
> > Date: Saturday, 16 March 2024 at 21:21:44
> > To: "TheDIYGuy999/Rc_Engine_Sound_ESP32" ***@***.******@***.***>>
> > Cc: "Bester, Frikkie (ZA - QSR)" ***@***.******@***.***>>, "Comment"
> > ***@***.******@***.***>>
> > Subject: Re: [TheDIYGuy999/Rc_Engine_Sound_ESP32] ESP32 Blue Light
> > Blinking !!Help Please!! (Issue #69)
> >
> >
> > Sure.
> >
> >
> >
> >
>
**************************************************************************************************
>
> >
> >
> > TheDIYGuy999 RC engine sound & light controller for ESP32 software
> version
> > 9.12.0
> >
> > https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
> >
> > Please read carefully:
> >
>
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
> >
> > XTAL Frequency: 40 MHz, CPU Clock: 240 MHz, APB Bus Clock: 80000000 Hz
> >
> > Internal RAM size: 289660 Byte, Free: 264244 Byte
> >
> > WiFi MAC address: E4:65:B8:83:E7:48
> >
> > Core 0 reset reason: 8: TG1WDT_SYS_RESET
> >
> > Core 1 reset reason: 14: EXT_CPU_RESET
> >
> >
>
**************************************************************************************************
>
> >
> >
> >
> >
> > EEPROM read.
> >
> > current eeprom_id: 2
> >
> > change it for default value upload!
> >
> >
> >
> > Warning, BATTERY_PROTECTION disabled! ESC with low discharge
protection
> > required!
> >
> > -------------------------------------
> >
> > ENABLE_WIRELESS option enabled
> >
> >
> >
> > Informations for web configuration via your cell phone or computer
> > *******************************
> >
> > SSID: My_Truck
> >
> > Password: 123456789
> >
> > IP address: 192.168.4.1
> >
> >
> >
> > WiFi Tx Power Level: 78
> >
> > WiFi Tx Power Level changed to: 26
> >
> >
> >
> > The following trailers are currently enabled:
> >
> > Trailer 1 MAC address: FE:49:01:00:00:01
> >
> > -------------------------------------
> >
> > Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on
CPU1).
> >
> >
> >
> > Core 1 register dump:
> >
> > PC : 0x40082511 PS : 0x00060435 A0 : 0x40085c60 A1 : 0x3ffbf70c
> >
> > A2 : 0x3ffda494 A3 : 0x3ffbdd7c A4 : 0x00000000 A5 : 0x00000000
> >
> > A6 : 0x000000b5 A7 : 0x00060d23 A8 : 0x3ff60000 A9 : 0x00000001
> >
> > A10 : 0x00000000 A11 : 0x3ffc5e40 A12 : 0x3ffc5e44 A13 : 0x00060423
> >
> > A14 : 0x00060421 A15 : 0x00000001 SAR : 0x00000020 EXCCAUSE:
0x00000006
> >
> > EXCVADDR: 0x00000000 LBEG : 0x4008a5e8 LEND : 0x4008a5f3 LCOUNT :
> > 0xffffffff
> >
> > Core 1 was running in ISR context:
> >
> > EPC1 : 0x400ebb0f EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 :
0x00000000
> >
> >
> >
> >
> >
> > Backtrace: 0x4008250e:0x3ffbf70c |<-CORRUPTED
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ELF file SHA256: 360c5eb004a87de0
> >
> >
> >
> > Rebooting...
> >
> >
> >
> >
>
**************************************************************************************************
>
> >
> >
> >
> >
> >
> >
> > ***@***.***>
> >
> >
> > —
> > Reply to this email directly, view it on GitHub<
> >
>
#69 (comment)>,
>
> > or unsubscribe<
> >
>
https://github.com/notifications/unsubscribe-auth/ASXSVQ5ZFCCKDAM2BXMO5K3YYSLT5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TMOJSGI>.
>
> >
> > You are receiving this because you commented.Message ID: ***@***.***>
> > Volkswagen Group Africa
> > Chairperson & Managing Director:
> >
> > M Biene*
> >
> > Directors:
> > R Coleman (Human Resources)
> > N Maliza (Corporate & Government Affairs)
> > T Milz* (Sales and Marketing)
> > F Ribeiro** (Finance)
> > U Schwabe* (Production)
> >
> > M Raphulu (Non-Executive)
> >
> > German*
> > Brazilian**
> >
> > Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE
compliant
> >
> > DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd
(Reg
> > No. 1946/023458/07), trading as Volkswagen Group Africa
> >
> > Any views expressed in this message are those of the individual
sender.
> > No liability shall attach whatsoever to Volkswagen of South Africa
from
> > this communication except where the sender is acting on specific
> authority
> > of Volkswagen of South Africa, such authority being public record and
> > acknowledged by Volkswagen of South Africa by nature of the employee's
> > functions. This document may in no way be photocopied, printed,
scanned
> or
> > electronically duplicated for any purposes other than that for which
it
> > was originally intended.
> > If you are not the intended recipient of this communication, please
> > discard this message and notify Volkswagen of South Africa immediately
> at
> > ***@***.***
> > Volkswagen of South Africa's anonymous toll free ethics number is: 080
> 111
> > 3949
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#69 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BG7NMHP6TZ3SQ2IRHUAWC43YYSMUZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA4TSNRVGA>
>
> > .
> > You are receiving this because you authored the thread.[image: Image
> > removed by sender.]Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub<
>
#69 (comment)>,
> or unsubscribe<
>
https://github.com/notifications/unsubscribe-auth/ASXSVQYP2XHM3O3KLXDUMNLYYSRCJAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEYTENRWG4>.
>
> You are receiving this because you commented.Message ID: ***@***.***>
> Volkswagen Group Africa
> Chairperson & Managing Director:
>
> M Biene*
>
> Directors:
> R Coleman (Human Resources)
> N Maliza (Corporate & Government Affairs)
> T Milz* (Sales and Marketing)
> F Ribeiro** (Finance)
> U Schwabe* (Production)
>
> M Raphulu (Non-Executive)
>
> German*
> Brazilian**
>
> Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
>
> DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
> No. 1946/023458/07), trading as Volkswagen Group Africa
>
> Any views expressed in this message are those of the individual sender.
> No liability shall attach whatsoever to Volkswagen of South Africa from
> this communication except where the sender is acting on specific
authority
> of Volkswagen of South Africa, such authority being public record and
> acknowledged by Volkswagen of South Africa by nature of the employee's
> functions. This document may in no way be photocopied, printed, scanned
or
> electronically duplicated for any purposes other than that for which it
> was originally intended.
> If you are not the intended recipient of this communication, please
> discard this message and notify Volkswagen of South Africa immediately
at
> ***@***.***
> Volkswagen of South Africa's anonymous toll free ethics number is: 080
111
> 3949
>
> —
> Reply to this email directly, view it on GitHub
> <
#69 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BG7NMHMFYLWL3GWB44QSF53YYSTNDAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAMJWHE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQ3SRKMLAGMWEZM6GEDYYSTWZAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGEZDAOJSHE>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub <
#69 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/BG7NMHOGRBBIYYHWHD3H2Y3YYUWBTAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGMZDCOJXGY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<
#69 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/ASXSVQYSYE7HCGGW7QR5SJDYZKEYNAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJRGM4DINBSGQ>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg
No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from
this communication except where the sender is acting on specific authority
of Volkswagen of South Africa, such authority being public record and
acknowledged by Volkswagen of South Africa by nature of the employee's
functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it
was originally intended.
If you are not the intended recipient of this communication, please
discard this message and notify Volkswagen of South Africa immediately at
***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111
3949
—
Reply to this email directly, view it on GitHub
<#69 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BG7NMHLYRSOVS27PUL4CVI3YZPQCLAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJUGUZTMNZUGU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#69 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASXSVQ3OXHY7SUAPJA6XARTYZPSD5AVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJUGU3TENZVGU>.
You are receiving this because you commented.Message ID: ***@***.***>
Volkswagen Group Africa
Chairperson & Managing Director:
M Biene*
Directors:
R Coleman (Human Resources)
N Maliza (Corporate & Government Affairs)
T Milz* (Sales and Marketing)
F Ribeiro** (Finance)
U Schwabe* (Production)
M Raphulu (Non-Executive)
German*
Brazilian**
Volkswagen of South Africa (Pty) Ltd is proudly Level 3 B-BBEE compliant
DISCLAIMER : Registered Name: Volkswagen of South Africa (Pty) Ltd (Reg No. 1946/023458/07), trading as Volkswagen Group Africa
Any views expressed in this message are those of the individual sender.
No liability shall attach whatsoever to Volkswagen of South Africa from this communication except where the sender is acting on specific authority of Volkswagen of South Africa, such authority being public record and acknowledged by Volkswagen of South Africa by nature of the employee's functions. This document may in no way be photocopied, printed, scanned or
electronically duplicated for any purposes other than that for which it was originally intended.
If you are not the intended recipient of this communication, please discard this message and notify Volkswagen of South Africa immediately at ***@***.***
Volkswagen of South Africa's anonymous toll free ethics number is: 080 111 3949
—
Reply to this email directly, view it on GitHub <#69 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BG7NMHI6IOX3IX3AD6MWQQDYZQIODAVCNFSM6AAAAABEXN25E6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJUHA4DCOBZGI> .
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello
Your ESP32 engine sound project is very nice, currently trying to put it into my 3d printed 1/14 scale kenworth
But i have an issue with the circuit board not working, please see the below google drive video
https://drive.google.com/file/d/1ZZUraMMt_CvwXIOm6ZMI8HmvmG5yAJjD/view?usp=sharing
I have not adjusted the code as i want to use Sbus so just loaded the code up, but as per the video you can see that when turned on the blue light just flashes
i have adjusted the settings on the remote i am using which is a Flysky FS i6x and has its serial output set on S Bus, the receiver is also s bus compatible, i am using a flysky ia10b s receiver
i have also tried ibus, PWM and PPM and all result in the same issue
What have i done wrong??
your help would be much appreciated
many thanks
Lawson
The text was updated successfully, but these errors were encountered: