v9.12.0

• Support for 36 Pin version removed
• Support for Wemos D1 Mini ESP32 added (#define WEMOS_D1_MINI_ESP32 in "0_generalSettings.h"). Allows to use the upcoming wireless trailer controller as modular sound controller.
• In BUS communication mode: steering servo signal output stays disabled until auto zero was successful. Important in IBUS mode to prevent servo "ghost moves"
• Short triple flash, if no valid input bus signal is detected, no reboot loop anymore
• Short double flash, if no valid battery is detected, no reboot loop anymore
• WiFi Tx power adjustable in "0_generalSettings.h"
• Short double flash, if battery error during controller start
• WiFi Tx power lowered = less noise in the speaker and longer battery life
• Tx power is displayed in the serial monitor
• WiFi based configuration website for trailer options added
• Settings files renamed, "adjustments" removed
• ESP32 trailer software moved to (the old verion without WiFi is still included): https://github.com/TheDIYGuy999/wirelessTrailerESP32web

v9.11.0

LS3 Engine added, used in James Bond Spectre Defender: Defender62LS3.h
Changes in ESP32 trailer sketch. Mac addresses which are not working (causing engine revving issues) were discovered thanks to FrikkieBester. Unfortunately I still don't know why.
In 7_adjustmentsServos.h: NO_WINCH_DELAY option added, servo signal for wincn is changed immediately in this case

v9.10.0

• First quick and dirty STEAM_LOCOMOTIVE_MODE implementation (see vehicles/Adler.h). Note, that you need to disable VIRTUAL_3_SPEED
• Steam whistle on horn channel
• In 8_adjustmentsSound.h: #define NO_INDICATOR_SOUND option, if you don't want the tic - tac sound

v9.9.1

• Flysky SBUS should now be stable with #define EMBEDDED_SBUS. Please let me know, if not.
• BATTERY_PROTECTION: scaling bug with higher resistor values fixed.

v9.9.0

• New NEOPIXEL_UNION_JACK animation for Land Rover ;-)
• New MAX_POWER_MILLIAMPS setting for Neopixels. This and other optimizations is eliminating the flickering Neopixels issue
• 3_adjustmentsESC.h: globalAccelerationPercentage allows to adjust the acceleration, if vehicle setting is not OK
• 4_adjustmentsTransmission.h: lowRangePercentage allows to adjust the acceleration in low transmission (off road) range. Used for MODE1_SHIFTING and WPL 2 speed transmission
• Channel failsafe changed
• 2_adjustmentsRemote.h: External SBUS library not required anymore. See option #define EMBEDDED_SBUS. "sbusInverted" moved to remote configuration profiles, so you don't have to change it anymore
• SBUS still unstable with Flysky remotes! Especially in combination with WIRELESS_TRAILER. Use IBUS in this case! I'm thankful for hints about this bug. Differences: Micro RC is sending an SBUS packet every 14ms, Flysky every 7ms

v9.8.0

Adjustable RECOVERY_HYSTERESIS for battery protection
8_adjustmentsSound.h (masterVolumeCrawlerThreshold) and 3_adjustmentsESC.h (crawlerEscRampTime): switchable crawler mode with just minimal inertia for gearbox protection. Allows to have a "show mode" and a "competition mode"
3_adjustmentsESC.h: Additional comments in battery low dischgarge section, according to neo2001

v9.7.0

Changes:

• NEOPIXEL_KNIGHT_RIDER scanner optimized, synchrone with sound
• NEOPIXEL_BLUELIGHT: red & blue bluelight animation for fire trucks etc.
• NEOPIXEL_HIGHBEAM: Neopixel bar now also usable for full beam and headlight flasher. Also working in combination with NEOPIXEL_KNIGHT_RIDER & NEOPIXEL_BLUELIGHT
• "Audio2Header.html" tool now able to remove noise in silent passages (option "remove noise floor")
• ESC state machine hanging in case 1 or 3, if throttle trigger direction changed qickly: bug solved
• Engine volume raising, if throttle trigger direction changed qickly: bug solved
• Improved ESC_DEBUG messages
• 3_adjustmentsESC.h: options better organized, OVERDRIVE now also usable with VIRTUAL_3_SPEED. In this case, the 4th (overdrive) gear is engaged @ full throttle & high RPM in 3rd gear
• 2_adjustmentsRemote.h: CHANNEL_AVERAGING option (recommended, if you have issues with unstable channels)

v9.6.0

There were no releases before. Older version numbers see README.md