If you are like me and can't use the version of Cura included with the Maker Select because you use a Mac, or if you simply don't have the contents of the included SD card, you can use the profile included in this repo. Simply import maker_select_v2_cura_1504.profile.ini into Octoprint, or any other slicer that accepts Cura ini files, and you should be ready to print.
The settings below are intended for printing with PLA and are included in the profile. All units are in millimeters unless otherwise noted.
| Setting name | Value |
|---|---|
| Layer height | 0.2 |
| Shell thickness | 1.2 |
| Enable retraction | Checked |
| Bottom/top thickness | 0.6 |
| Fill density | 20% |
| Print temperature | 205 |
| Bed temperature | 70 |
| Support type | None |
| Platform adhesion | Raft |
| Filament diameter | 1.75 |
| Flow | 100% |
| Nozzle size | 0.4 |
| Retraction speed | 40.0 |
| Retraction distance | 4.5 |
| Initial layer thickness | 0.3 |
| Initial layer line width | 100 |
| Cut off object bottom | 0.0 |
| Dual extrusion overlap | 0.15 |
| Travel speed | 80 |
| Bottom layer speed (mm/s) | 20 |
| Infill speed (mm/s) | 50 |
| Top/bottom speed (mm/s) | 0.0 |
| Outer shell speed (mm/s) | 15 |
| Inner shell speed (mm/s) | 30 |
| Minimal layer time (sec) | 5 |
| Enable cooling fan | Checked |