TinyCircuits Tinier Screen Arduino Library

This Arduino library is intended for use with TinyCircuits' 0.42" OLED Wireling, 0.69" OLED Wireling, and 0.96" OLED Wireling.

Support this library by buying products from TinyCircuits

Tinier Screen Class Basics

The Tinier Screen Library relies upon the Graphics Buffer Library to create a graphics buffer, and this library will then use that buffer to print it to the screen used.

Initialization & Control

• void startData(void)
• void startCommand(void)
• void endTransfer(void)
• void begin(void)
• void begin(uint8_t resetPin)
• void on(void)
• void off(void)
• void setFlip(uint8_t)
• void setMirror(uint8_t)
• void setBitDepth(uint8_t)
• void setBrightness(uint8_t)
• void writeRemap(void)

Built-In Drawing Commands

• void drawPixel(uint8_t, uint8_t, uint16_t)
• void drawLine(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)
• void drawLine(uint8_t, uint8_t, uint8_t, uint8_t, uint16_t)
• void drawRect(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)
• void drawRect(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint16_t)
• void clearWindow(uint8_t, uint8_t, uint8_t, uint8_t)
• void clearScreen(void)

Basic Graphic Commands

• void writePixel(uint16_t)
• void writeBuffer(const uint8_t *, int)
• void setX(uint8_t, uint8_t)
• void setY(uint8_t, uint8_t)
• void goTo(uint8_t x, uint8_t y)

I2C / GPIO

• uint8_t getButtons(uint8_t)
• uint8_t getButtons(void)
• void writeGPIO(uint8_t, uint8_t)

Font

• void setFont(void)
• uint8_t getFontHeight(void)
• uint8_t getPrintWidth(char *)
• void setCursor(uint8_t, uint8_t)
• void fontColor(uint16_t, uint16_t)
• virtual size_t write(uint8_t)

DMA for SAMD

• void initDMA(void)
• uint8_t getReadyStatusDMA(void)
• void writeBufferDMA(uint8_t *,int)