Raw code sender

examples/rawsender/rawsender.ino

@@ -0,0 +1,77 @@
+#include <Arduino.h>
+#include <HeatpumpIR.h>
+
+#ifndef ESP8266
+IRSenderPWM irSender(9);       // IR led on Arduino digital pin 9, using Arduino PWM
+//IRSenderBlaster irSender(3); // IR led on Arduino digital pin 3, using IR Blaster (generates the 38 kHz carrier)
+#else
+IRSenderBitBang irSender(D1);  // IR led on Wemos D1 mini pin 'D1'
+#endif
+
+
+// This sketch can be used to send 'raw' IR signals, like this:
+// Hh001101011010111100000100101001010100000000000111000000001111111011010100000001000100101000
+//
+// Adjust these timings based on the heatpump / A/C model
+#define IR_ONE_SPACE    2080
+#define IR_ZERO_SPACE   780
+#define IR_BIT_MARK     426
+#define IR_PAUSE_SPACE  30000
+#define IR_HEADER_MARK  6680
+#define IR_HEADER_SPACE 3140
+
+
+void setup()
+{
+  Serial.begin(9600);
+  delay(500);
+
+  Serial.println(F("Starting..."));
+}
+
+void loop()
+{
+  char symbols[1024];
+  char *symbolsPtr = symbols;
+  int currentpulse=0;
+  memset(symbols, 0, sizeof(symbols));
+
+  Serial.println(F("Ready to send symbols."));
+
+  while ((currentpulse = Serial.readBytesUntil('\n', symbols, sizeof(symbols)-1)) == 0)
+  {}
+
+  sendRaw(symbols);
+}
+
+void sendRaw(char *symbols)
+{
+  irSender.space(0);
+  irSender.setFrequency(38);
+
+  while (char symbol = *symbols++)
+  {
+    switch (symbol)
+    {
+      case '1':
+        irSender.space(IR_ONE_SPACE);
+        irSender.mark(IR_BIT_MARK);
+        break;
+      case '0':
+        irSender.space(IR_ZERO_SPACE);
+        irSender.mark(IR_BIT_MARK);
+        break;
+      case 'W':
+        irSender.mark(IR_PAUSE_SPACE);
+        break;
+      case 'H':
+        irSender.mark(IR_HEADER_MARK);
+        break;
+      case 'h':
+        irSender.mark(IR_HEADER_SPACE);
+        break;
+    }
+  }
+
+  irSender.space(0);
+}