Voron0 Waveshare 3.5" Display Mount

This mod will allow you to mount a 3.5" Waveshare on a Voron 0 so that you can use KlipperScreen.

BOM

• 3.5" Waveshare screen
• 4 M3x6 screws (Fasten front mount to back mount)
• 2 M3x6 screws (Fasten mount to frame)
• 2 M3x6 screws (Fasten 2 skirt parts to frame)

NOTE

The parts are in the recommend print orientation.

Installation

• I created a wiring harness to connect the following pins from the Pi (I'm using a Pi Zero 2 W) to the display:
• Insert the screen into the front part
• Line up the back part and fasten with 4 M3x6 screws
• Line up the screw holes on the mount to the nuts in the bottom extrusion of the frame
• Fasten the mount with 2 M3x6 screws
• Fasten the 2 skirt parts to the frame.
• Profit

Images